Loading ...
Loading ...
Loading ...
6. Remove the three front bumper
cover lower fasteners, only on the
side of headlamp being serviced.
E159697
7. Separate the front bumper cover
from the fender, pull the fender
outward 3 cm.
E159698
8. From the front of the vehicle, pull
the front bumper cover forward 10
cm.
E159699
9. Carefully pull the headlamp
assembly outward to disengage it
from the lower fixing point.
10. Carefully lift the headlamp and
remove from vehicle.
11. Disconnect the electrical
connector.
CHANGING A BULB
Lamp Assembly Condensation
Exterior lamps are vented to
accommodate normal changes in
pressure. Condensation can be a
natural by-product of this design.
When moist air enters the lamp
assembly through the vents, there is
a possibility that condensation can
occur when the temperature is cold.
When normal condensation occurs, a
thin film of mist can form on the
interior of the lens. The thin mist
eventually clears and exits through
the vents during normal operation.
Clearing time may take as long as 48
hours under dry weather conditions.
292
Maintenance
Loading ...
Loading ...
Loading ...