Loading ...
Loading ...
Loading ...
11
Operation and Controls
MOVEMENT OF YOUR APPLIANCE
Position the beverage refrigerator in a dry and well-ventilated place. Keep the beverage refrigerator away
from direct sunlight, heaters, and corrosive gases or chemicals.
Clean the interior surface with lukewarm water using a soft cloth.
Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.
The beverage refrigerator can be simply moved from one room to another by using the pre-installed wheel
rollers. If the appliance is needed to be lifted, two or more people should move beverage refrigerator. Fail-
ure to do so can result in back or other injury.
We do not recommend installing the appliance on carpet.
DOOR LOCK
The unit is provided with a lock and key combination. The keys are located inside the plastic bag that holds
this User Manual. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door
do the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a se-
cure place.
NORMAL SOUNDS
The unit is cooled by a compressor. The compressor pumps coolant through the cooling system, producing
operating noise. Even when the compressor cuts out, noises caused by changes in temperature and
pressure are unavoidable. Operating noise will be most audible immediately after the compressor comes on.
It becomes quieter as the operating period continues.
The following noises are normal and occur from time to time:
Gurgling sound, caused by the refrigerant flowing through the appliance’s coils,
Humming noise made by the compressor. This noise can get louder for brief periods when the motor is
switching on.
Cracking/popping sounds, resulting from the materials contraction and expansion due to temperature vari-
ations,
Fan operating sound, to circulate the air within the cabinet for even temperature distribution and to save
energy. The fan running saves energy by circulating the cool air to avoid the compressor from running
too frequently.
Unusual noise is normally the result of improper installation.
Where the unit is installed in open-plan kitchen or in partition walls, the level of operating noise will be
heard more acutely. However, this is due to the surrounding architecture and not to the unit.
NOTE: An individual’s perception of noise is directly linked to the environment in which the unit is lo-
cated, as well the specific type of models. Our appliances are in line with international standards for such ap-
pliance and in line with the latest technical developments. Please remember that the noise of the compressor
and the coolant circulating in the system is unavoidable.
POWER INTERRUPTION
If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3 -5 minutes before
restarting the appliance. If attempted to restart before this time delay, the appliance may not start.
Loading ...
Loading ...
Loading ...