Loading ...
Loading ...
Loading ...
18
ADJUSTING CONTROL SETTINGS
Give the refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food
into the refrigerator. The mid-settings indicated in the
previous section should be correct for normal household
refrigerator usage. The controls are set correctly when milk
or juice is as cold as you like and when ice cream is firm.
The refrigerator control functions as the thermostat for the
entire appliance (refrigerator and freezer sections.) The
higher the number setting, the longer the compressor will
run to keep the temperature colder. The freezer control
adjusts the cold air flow from the freezer to the refrigerator.
Setting the freezer control to a lower temperature keeps
more cold air in the Freezer compartment to make it colder.
If you need to adjust temperatures in the refrigerator or
freezer, start by adjusting the refrigerator first. Wait 24
hours after the refrigerator adjustment to check the freezer
temperature. If it is too warm or too cold, then adjust the
freezer control as well.
Use the settings listed in the chart below as a guide. Always
remember to wait at least 24 hours between adjustments.
RECOMMENDED
CONDITION/REASON: ADJUSTMENT:
REFRIGERATOR section
Turn
too warm
Door opened often
control to next
Large amount of food added
higher number,
Room temperature very warm
wait 24 hours,
Then re-check
FREEZER section too warm/ Turn FREEZER
ice not made fast enough control to next
Door opened often
higher number,
Large amount of food added
wait 24 hours,
Very cold room temperature Then re-check
(Can not cycle often enough)
Heavy ice usage
Air vents blocked by items
Move items out of
air stream
REFRIGERATOR section too
Turn
Cold
Controls not set correctly for
control to next
your conditions
lower number,
wait 24 hours,
then re-check
FREEZER section too cold Turn FREEZER
Controls not set correctly for
Control to next
your conditions
lower number,
wait 24 hours,
then re-check
SETTING THE CONTROLS
• Your refrigerator has a control pad on the dispenser that
lets you regulate the temperature in the freezer and
refrigerator compartments.
• Initially set the REFRIGERATOR CONTROL at 37 °F (3 °C)
and the FREEZER CONTROL at 0 °F (–18 °C). Leave it at
this setting for 24 hours (one day) to stabilize. Then adjust
adjust the compartment temperature as desired.
• Refrigerator Temp Control: 33 °F to 46 °F (0 °C to 8 °C)
The lower the number setting, the colder the refrigerator
compartment will become.
• Freezer Temp Control: -6 °F to 8 °F (-21 °C to -13 °C)
When the setting is at a lower number, the freezer
compartment becomes colder. The refrigerator
compartment becomes warmer because less cold air
flows into the refrigerator.
NOTE: If you want to change °F to °C or the reverse, press
and hold FREEZER key and REFRIGERATOR key
simultaneously for 5 seconds or more.
NOTE: Touch display once to activate, then touch again to
change the settings or activate a function. If 10 seconds
have passed since the display has been touched, it will be
necessary to touch “once” again to reactivate.
This is to prevent accidental display setting changes.
• Ice Plus: Press the ICE PLUS button and the LED will
turn on. This function will remain activated for 24 hours
and increase the cooling speed of the freezer and the
amount of ice produced.
• Dispenser Lock: Press and hold the LOCK button for 3
seconds to lock the dispenser When it is locked, the.
dispenser will not operate. To unlock, press and hold the
LOCK button for 3 seconds.
REFRIGERATOR
REFRIGERATOR
IMPORTANT: Wipe out moisture before using the display
button as operation of the button is based on touch sensing
method and becomes slow or other buttons may operate if
moisture is stuck to the surface of the button.
• Filter Reset: It displays in months the number of months
left to exchange the filter from the moment power is
connected to the refrigerator. If you have changed the
filter after 6 months of use, press and hold the FILTER
button 3 seconds or more and the filter display will be
initialized with a buzzing sound.
NOTE
: The average life of the filter is 6 months.
WARNING: If a door is open, the dispenser does not
*
REFRIGERATOR INSTALLATION
work.
• Display OFF Mode: To activate this mode press and hold
ICE PLUS and FREEZER key over 5 seconds until the
lights turn off. If the Display is touched or any door opens
the lights will turn on and after 20 seconds of inactivity the
lights will turn off automatically.
To exit Display OFF Mode press and hold ICE PLUS and
PLUS and FREEZER key over 5 seconds until the lights
tilt. Display Energy Save Mode does not affect the
temperature control settings of the unit.
(Models with water dispenser)
Loading ...
Loading ...
Loading ...