Canon POWERSHOT-ELPH-130 - 16.0 MP Digital Camera User Manual

Camera User Guide

ENGLISH

©CANON INC. 2013 CDD-E520-010

• Click the buttons in the lower right to access other pages.

: Next page

: Previous page

: Page before you clicked a link

• To jump to the beginning of a chapter, click the chapter

title at right.

From chapter title pages, you can access topics by

clicking their titles.

• Make sure you read this guide, including the “Safety

Precautions” section, before using the camera.

• Reading this guide will help you learn to use the camera

properly.

• Store this guide safely so that you can use it in the

future.

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Preliminary Notes and Legal Information

• Take and review some test shots initially to make sure the images were

recorded correctly. Please note that Canon Inc., its subsidiaries and

afliates, and its distributors are not liable for any consequential damages

arising from any malfunction of a camera or accessory, including memory

cards, that result in the failure of an image to be recorded or to be

recorded in a way that is machine readable.

• Images recorded by the camera are intended for personal use. Refrain

from unauthorized recording that infringes on copyright law, and note that

even for personal use, photography may contravene copyright or other

legal rights at some performances or exhibitions, or in some commercial

settings.

• The camera warranty is valid only in the area of purchase. In case of

camera problems while abroad, return to the area of purchase before

contacting a Canon Customer Support Help Desk.

• Although the LCD monitor is produced under extremely high-precision

manufacturing conditions and more than 99.99% of the pixels meet

design specications, in rare cases some pixels may be defective or may

appear as red or black dots. This does not indicate camera damage or

affect recorded images.

• The LCD monitor may be covered with a thin plastic lm for protection

against scratches during shipment. If covered, remove the lm before

using the camera.

• When the camera is used over an extended period, it may become warm.

This does not indicate damage.

Package Contents

Before use, make sure the following items are included in the package.

If anything is missing, contact your camera retailer.

Camera

Battery Pack

NB-11L

Battery Charger

CB-2LF/CB-2LFE

Interface Cable

IFC-400PCU

Wrist Strap

WS-800

DIGITAL CAMERA

Solution Disk*

(CD-ROM)

Getting Started

Warranty Card

* Contains software and PDF manuals (=

18).

• A memory card is not included (=

2).

Compatible Memory Cards

The following memory cards (sold separately) can be used, regardless of capacity.

• SD memory cards*

• SDHC memory cards*

• SDXC memory cards*

* Cards conforming to SD standards. However, not all memory cards have been veried

to work with the camera.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Part Names and Conventions in This Guide

Zoom lever

Shooting: /

Playback: <k (magnify)> /

Lens

Speaker

Shutter button

Lamp

Power button

Microphone

Flash

Wi-Fi antenna area

Tripod socket

Memory card/battery cover

DC coupler cable port

Strap mount

• Instructions in this guide apply to the camera under default settings.

• For convenience, all supported memory cards are simply referred to as

the “memory card”.

• The tabs shown above titles indicate whether the function is used for still

images, movies, or both.

Still Images

: Indicates that the function is used when shooting or

viewing still images.

Movies

: Indicates that the function is used when shooting or

viewing movies.

Screen (LCD monitor)

<1 (Playback)> button

Movie button

Mode switch

AV OUT (Audio/video output) /

DIGITAL terminal

Indicator

<n> button

/

(Wi-Fi)> / Up button

<e (Macro)> / Left button

FUNC./SET button

<h (Flash)> / Right button

<l (Display)> / Down button

• The following icons are used to indicate functions that differ depending

on the camera model:

ELPH 130 IS

IXUS 140

: Functions and precautions for the PowerShot ELPH 130

IS/IXUS 140 only

ELPH 120 IS

IXUS 135

: Functions and precautions for the PowerShot ELPH 120

IS/IXUS 135 only

• This guide uses PowerShot ELPH 130 IS/IXUS 140 illustrations and

screenshots for all explanations.

• In this guide, icons are used to represent the corresponding camera

buttons and switches on which they appear or which they resemble.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

• The following camera buttons and controls are represented by icons.

<o> Up button

on back

<q> Left button on back

<r> Right button on back

Down button on back

• Shooting modes and on-screen icons and text are indicated in brackets.

•

: Important information you should know

•

: Notes and tips for expert camera use

• =xx: Pages with related information (in this example, “xx” represents a

page number)

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Package Contents .........................2

Compatible Memory Cards ............2

Preliminary Notes and Legal

Information .....................................2

Part Names and Conventions in

This Guide......................................3

Table of Contents ........................... 5

Contents: Basic Operations ...........6

Safety Precautions ......................... 7

Basic Guide .................... 10

Initial Preparations ....................... 11

Trying the Camera Out ................15

Included Software, PDF

Manuals .......................................18

System Map .................................22

Advanced Guide ............. 24

1 CameraBasics.....................24

On/Off ..........................................25

Shutter Button ..............................26

Shooting Display Options ............26

FUNC. Menu ................................27

MENU Menu ................................28

Indicator Display ..........................29

Clock ............................................29

2 SmartAutoMode.................30

Shooting (Smart Auto) .................31

Common, Convenient Features ... 35

Image Customization Features ....38

Helpful Shooting Features ...........40

Customizing Camera Operation ..42

3 OtherShootingModes........44

Specic Scenes ...........................45

Applying Special Effects ..............46

Special Modes for Other

Purposes ...................................... 50

4 PMode..................................54

Shooting in Program AE

([P] Mode) ....................................55

Image Brightness (Exposure

Compensation) ............................55

Color and Continuous Shooting ... 57

Shooting Range and Focusing ....60

Flash ............................................64

Other Settings ..............................65

Table of Contents

5 PlaybackMode....................66

Viewing ........................................67

Browsing and Filtering Images ....69

Image Viewing Options ................70

Protecting Images ........................72

Erasing Images ............................74

Rotating Images ........................... 76

Image Categories ........................77

Editing Still Images ......................78

Editing Movies..............................81

6 Wi-FiFunctions...................83

What You Can Do With Wi-Fi ....... 84

Using Wi-Fi to Send Images

From the Camera ......................... 85

Wi-Fi (Wireless LAN)

Precautions ..................................85

Security Precautions ....................86

Glossary ....................................... 87

Registering a Camera Nickname

(First time only) ............................88

Connecting to Web Services ........89

Connecting to a Smartphone .......91

Connecting to Another Camera ...93

Connecting to a Computer ...........94

Connecting to a Printer ................99

Sending Images .........................101

Sending Images to a Computer

via CANON iMAGE

GATEWAY ..................................103

Geotagging Images on the

Camera ......................................103

Editing or Erasing Wi-Fi

Settings ......................................104

7 SettingMenu......................106

Adjusting Basic Camera

Functions ...................................107

8 Accessories.......................113

Optional Accessories ................. 114

Using Optional Accessories ....... 115

Printing Images .......................... 117

9 Appendix............................125

Troubleshooting .........................126

On-Screen Messages ................129

On-Screen Information ..............131

Functions and Menu Tables ....... 134

Handling Precautions ................. 140

Specications ............................. 140

Index ..........................................144

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Contents: Basic Operations

4 Shoot

 Use camera-determined settings (Auto Mode) .................................... 31

Shooting people well

Portraits

45)

Against Snow

45)

Matching specic scenes

Low Light

45)

Fireworks

45)

Applying special effects

Vivid Colors

46)

Poster Effect

46)

Fish-Eye Effect

46)

Miniature Effect

47)

Toy Camera Effect

48)

Monochrome

48)

 Focus on faces ......................................................................... 31, 45, 61

 Without using the ash (Flash Off) ....................................................... 37

 Include yourself in the shot (Self-Timer) ........................................ 35, 51

 Add a date stamp ................................................................................. 37

1 View

 View images (Playback Mode) ............................................................. 67

 Automatic playback (Slideshow) .......................................................... 71

 On a TV ............................................................................................... 115

 On a computer ..................................................................................... 19

 Browse through images quickly ........................................................... 69

 Erase images ....................................................................................... 74

E Shoot/ViewMovies

 Shoot movies ....................................................................................... 31

 View movies (Playback Mode) ............................................................. 67

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

c Print

 Print pictures ....................................................................................... 117

 Save

 Save images to a computer via a cable ............................................... 19

 UseWi-FiFunctions

 Send images to a smartphone ............................................................. 91

 Share images online ............................................................................ 94

 Send images to a computer ............................................................... 103

Safety Precautions

• Before using the product, please ensure that you read the safety precautions

described below. Always ensure that the product is used correctly.

• The safety precautions noted on the following pages are intended to

prevent injuries to yourself and other persons, or damage to the equipment.

• Be sure to also check the guides included with any separately sold

accessories you use.

Warning

Denotes the possibility of serious injury or death.

• Donottriggertheashincloseproximitytopeople’seyes.

Exposure to the intense light produced by the ash could damage eyesight. In

particular, remain at least 1 meter (39 inches) away from infants when using the ash.

• Storethisequipmentoutofthereachofchildrenandinfants.

Strap: Putting the strap around a child’s neck could result in asphyxiation.

• Useonlyrecommendedpowersources.

• Donotattempttodisassemble,alterorapplyheattotheproduct.

• Avoiddroppingorsubjectingtheproducttosevereimpacts.

• Toavoidtheriskofinjury,donottouchtheinterioroftheproductif

ithasbeendroppedorotherwisedamaged.

• Stopusingtheproductimmediatelyifitemitssmoke,astrange

smell,orotherwisebehavesabnormally.

• Donotuseorganicsolventssuchasalcohol,benzine,orthinnerto

cleantheproduct.

• Donotlettheproductcomeintocontactwithwater(e.g.seawater)

orotherliquids.

• Donotallowliquidsorforeignobjectstoenterthecamera.

This could result in electrical shock or re.

If liquids or foreign objects come into contact with the camera interior,

immediately turn the camera off and remove the battery.

If the battery charger becomes wet, unplug it from the outlet and consult

your camera retailer or a Canon Customer Support Help Desk.

• Useonlytherecommendedbattery.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

• Donotplacethebatterynearorindirectame.

• Unplugthepowercordperiodically,andusingadrycloth,wipeaway

anydustanddirtthathascollectedontheplug,theexteriorofthe

poweroutlet,andthesurroundingarea.

• Donothandlethepowercordwithwethands.

• Donotusetheequipmentinamannerthatexceedstheratedcapacity

oftheelectricaloutletorwiringaccessories.Donotuseifthepower

cordorplugaredamaged,ornotfullypluggedintotheoutlet.

• Donotallowdirtormetalobjects(suchaspinsorkeys)tocontact

theterminalsorplug.

The battery may explode or leak, resulting in electrical shock or re. This could cause

injury and damage the surroundings. In the event that a battery leaks and the battery

electrolyte contacts eyes, mouth, skin or clothing, immediately ush with water.

• Turnthecameraoffinplaceswherecamerauseisprohibited.

The electromagnetic waves emitted by the camera may interfere with the

operation of electronic instruments and other devices. Exercise adequate

caution when using the camera in places where use of electronic devices is

restricted, such as inside airplanes and medical facilities.

• DonotplaythesuppliedCD-ROM(s)inanyCDplayerthatdoesnot

supportdataCD-ROMs.

It is possible to suffer hearing loss from listening with headphones to the

loud sounds of a CD-ROM played on an audio CD player (music player).

Additionally, this could damage the speakers.

Caution

Denotes the possibility of injury.

• Whenholdingthecamerabythestrap,becarefulnottobangit,subject

ittostrongimpactsorshocks,orletitgetcaughtonotherobjects.

• Becarefulnottobumporpushstronglyonthelens.

This could lead to injury or damage the camera.

• Becarefulnottosubjectthescreentostrongimpacts.

If the screen cracks, injury may result from the broken fragments.

• Whenusingtheash,becarefulnottocoveritwithyourngersorclothing.

This could result in burns or damage to the ash.

• Avoidusing,placingorstoringtheproductinthefollowingplaces:

-Placessubjecttodirectsunlight

-Placessubjecttotemperaturesabove40°C(104°F)

-Humidordustyareas

These could cause leakage, overheating or an explosion of the battery,

resulting in electrical shock, re, burns or other injuries.

High temperatures may cause deformation of the camera or battery charger casing.

• Theslideshowtransitioneffectsmaycausediscomfortwhenviewed

forprolongedperiods.

Caution

Denotes the possibility of damage to the equipment.

• Donotaimthecameraatbrightlightsources(suchasthesunona

clearday).

Doing so may damage the image sensor.

• Whenusingthecameraonabeachoratawindylocation,becareful

nottoallowdustorsandtoenterthecamera.

This may cause the product to malfunction.

• Inregularuse,smallamountsofsmokemaybeemittedfromtheash.

This is due to the high intensity of the ash burning dust and foreign materials

stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other

foreign matter from the ash to prevent heat build-up and damage to the unit.

• Removeandstorethebatterywhenyouarenotusingthecamera.

If the battery is left inside the camera, damage caused by leakage may occur.

• Beforeyoudiscardthebattery,covertheterminalswithtapeorother

insulators.

Contacting other metal materials may lead to re or explosions.

• Unplugthebatterychargerfromthepoweroutletafterchargingis

complete,orwhenyouarenotusingit.

• Donotplaceanything,suchascloth,ontopofthebatterycharger

whileitischarging.

Leaving the unit plugged in for a long period of time may cause it to

overheat and distort, resulting in re.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

• Donotplacethebatterynearpets.

Pets biting the battery could cause leakage, overheating or explosion,

resulting in re or damage.

• Donotsitdownwiththecamerainyourpocket.

Doing so may cause malfunctions or damage the screen.

• Whenputtingthecamerainyourbag,ensurethathardobjectsdo

notcomeintocontactwiththescreen.

• Donotattachanyhardobjectstothecamera.

Doing so may cause malfunctions or damage the screen.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Gives basic instructions, from initial preparations to

shooting, playback, and saving on a computer

Basic Guide

InitialPreparations...................11

TryingtheCameraOut.............15

IncludedSoftware,

PDFManuals...........................18

SystemMap..............................22

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Initial Preparations

Prepare for shooting as follows.

Attaching the Strap

 Thread the end of the strap through the

strap hole (

), and then pull the other

end of the strap through the loop on the

threaded end (

Holding the Camera

 Place the strap around your wrist.

 When shooting, keep your arms close to

your body and hold the camera securely

to prevent it from moving. Do not rest

your ngers on the ash.

Charging the Battery

Before use, charge the battery with the included charger. Be sure to charge

the battery initially, because the camera is not sold with the battery charged.

1 Insertthebattery.

 After aligning the o marks on the battery

and charger, insert the battery by pushing

it in (

) and down ( ).

2 Chargethebattery.

 CB-2LF: Flip out the plug ( ) and plug

the charger into a power outlet (

 CB-2LFE: Plug the power cord into the

charger, then plug the other end into a

power outlet.

 The charging lamp turns orange and

charging begins.

 When charging is nished, the lamp turns

green.

3 Removethebattery.

 After unplugging the battery charger,

remove the battery by pushing it in (

)

and up (

• To protect the battery and keep it in optimal condition, do not charge

it continuously for more than 24 hours.

• For battery chargers that use a power cord, do not attach the

charger or cord to other objects. Doing so could result in malfunction

or damage to the product.

• For details on charging time and the number of shots and recording time

possible with a fully charged battery, see Number of Shots/Recording Time,

Playback Time (=

141).

• Charged batteries gradually lose their charge, even when they are not used.

Charge the battery on (or immediately before) the day of use.

• The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For

power outlets in a different format, use a commercially available adapter for

the plug. Never use an electrical transformer designed for traveling, which may

damage the battery.

CB-2LF

CB-2LFE

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Inserting the Battery and Memory Card

Insert the included battery and a memory card (sold separately).

Note that before using a new memory card (or a memory card formatted

in another device), you should format the memory card with this camera

109).

1 Checkthecard’swrite-protect

tab.

 Recording is not possible on memory

cards with a write-protect tab when the

tab is in the locked (downward) position.

Slide the tab up until it clicks into the

unlocked position.

2 Openthecover.

 Slide the cover ( ) and open it ( ).

3 Insertthebattery.

 While pressing the battery lock in the

direction of the arrow, insert the battery

as shown and push it in until it clicks into

the locked position.

 If you insert the battery facing the wrong

way, it cannot be locked into the correct

position. Always conrm that the battery

is facing the right way and locks when

inserted.

Terminals Battery

Lock

4 Insertthememorycard.

 Insert the memory card facing as shown

until it clicks into the locked position.

 Make sure the memory card is facing the

right way when you insert it. Inserting

memory cards facing the wrong way may

damage the camera.

5 Closethecover.

 Lower the cover ( ) and hold it down as

you slide it, until it clicks into the closed

position (

• For guidelines on how many shots or hours of recording can be saved on one

memory card, see “Number of 4:3 Shots per Memory Card” (=

141).

RemovingtheBatteryandMemoryCard

Removethebattery.

 Open the cover and press the battery

lock in the direction of the arrow.

 The battery will pop up.

Label

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Removethememorycard.

 Push the memory card in until it clicks,

and then slowly release it.

 The memory card will pop up.

Setting the Date and Time

Set the current date and time correctly as follows if the [Date/Time] screen

is displayed when you turn the camera on. Information you specify this way

is recorded in image properties when you shoot, and it is used when you

manage images by shooting date or print images showing the date.

You can also add a date stamp to shots, if you wish (=

37).

1 Turnthecameraon.

 Press the power button.

 The [Date/Time] screen is displayed.

2 Setthedateandtime.

 Press the <q><r> buttons to choose an

option.

 Press the <o> buttons to specify

the date and time.

 When nished, press the <m> button.

3 Setthehometimezone.

 Press the <q><r> buttons to choose

your home time zone.

4 Finishthesetupprocess.

 Press the <m> button when nished.

After a conrmation message, the setting

screen is no longer displayed.

 To turn off the camera, press the power

button.

• Unless you set the date, time, and home time zone, the [Date/Time]

screen will be displayed each time you turn the camera on. Specify

the correct information.

• To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then

choose [

] by pressing the <o> buttons.

ChangingtheDateandTime

Adjust the date and time as follows.

1 Accessthecameramenu.

 Press the <n> button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

2 Choose[Date/Time].

 Move the zoom lever to choose the [3]

tab.

 Press the <o> buttons to choose

[Date/Time], and then press the <m>

button.

3 Changethedateandtime.

 Follow step 2 on =

13 to adjust the

settings.

 Press the <n> button to close the

menu.

• Date/time settings can be retained for about 3 weeks by the camera’s built-in

date/time battery (backup battery) after the battery pack is removed.

• The date/time battery will be charged in about 4 hours once you insert a

charged battery or connect the camera to an AC adapter kit (sold separately,

114), even if the camera is left off.

• Once the date/time battery is depleted, the [Date/Time] screen will be

displayed when you turn the camera on. Follow the steps on =

13 to set the

date and time.

Display Language

Change the display language as needed.

1 EnterPlaybackmode.

 Press the <1> button.

2 Accessthesettingscreen.

 Press and hold the <m> button, and

then immediately press the <n>

button.

3 Setthedisplaylanguage.

 Press the <o><q><r> buttons to

choose a language, and then press the

<m> button.

 Once the display language has been set,

the setting screen is no longer displayed.

• The current time is displayed if you wait too long in step 2 after pressing the

<m> button before you press the <n> button. In this case, press the

<m> button to dismiss the time display and repeat step 2.

• You can also change the display language by pressing the <n> button

and choosing [Language

] on the [3] tab.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Still Images Movies

Trying the Camera Out

Follow these instructions to turn the camera on, shoot still images or

movies, and then view them.

Shooting (Smart Auto)

For fully automatic selection of the optimal settings for specic scenes,

simply let the camera determine the subject and shooting conditions.

1 Turnthecameraon.

 Press the power button.

 The startup screen is displayed.

2 Enter[

]mode.

 Set the mode switch to [

 Aim the camera at the subject. The

camera will make a slight clicking noise

as it determines the scene.

 Icons representing the scene and image

stabilization mode are displayed in the

upper right of the screen.

 Frames displayed around any detected

subjects indicate that they are in focus.

3 Composetheshot.

 To zoom in and enlarge the subject, move

the zoom lever toward (telephoto),

and to zoom away from the subject, move

it toward <j> (wide angle).

4 Shoot.

ShootingStillImages

Focus.

 Press the shutter button lightly, halfway

down. The camera beeps twice after

focusing, and AF frames are displayed to

indicate image areas in focus.

Shoot.

 Press the shutter button all the way

down.

 As the camera shoots, a shutter sound

is played, and in low-light conditions, the

ash res automatically.

 Keep the camera still until the shutter

sound ends.

 Your shot is only displayed until the

camera is ready to shoot again.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

ShootingMovies

Startshooting.

 Press the movie button. The camera

beeps once as recording begins, and

[

Rec] is displayed with the elapsed time.

 Black bars displayed on the top and

bottom edges of the screen indicate

image areas not recorded.

 Frames displayed around any detected

faces indicate that they are in focus.

 Once recording begins, take your nger

off the movie button.

Finishshooting.

 Press the movie button again to stop

shooting. The camera beeps twice as

recording stops.

Elapsed Time

Viewing

After shooting images or movies, you can view them on the screen as

follows.

1 EnterPlaybackmode.

 Press the <1> button.

 Your last shot is displayed.

2 Browsethroughyourimages.

 To view the previous image, press the

<q> button. To view the next image,

press the <r> button.

 To access Scroll Display mode, press and

hold the <q><r> buttons for at least one

second. In this mode, press the <q><r>

buttons to browse through images.

 To return to single-image display, press

the <m> button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

 Movies are identied by a [ ] icon. To

play movies, go to step 3.

3 Playmovies.

 Press the <m> button, press the

<o> buttons to choose [

], and

then press the <m> button again.

 Playback now begins, and after the movie

is nished, [

] is displayed.

 To adjust the volume, press the <o>

buttons.

• To switch to Shooting mode from Playback mode, press the shutter button

halfway.

ErasingtheImages

You can choose and erase unneeded images one by one. Be careful when

erasing images, because they cannot be recovered.

1 Chooseanimagetoerase.

 Press the <q><r> buttons to choose an

image.

2 Erasetheimage.

 Press the <m> button, press the

<o> buttons to choose [a], and

then press the <m> button again.

 After [Erase?] is displayed, press the

<q><r> buttons to choose [Erase], and

then press the <m> button.

 The current image is now erased.

 To cancel erasure, press the <q><r>

buttons to choose [Cancel], and then

press the <m> button.

• You can also erase all images at once (=

75).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Included Software, PDF Manuals

The software and PDF manuals on the included DIGITAL CAMERA Solution

Disk (CD-ROM) (=

2) are introduced below, with instructions for

installation, and saving images to a computer.

Software

After installing the software on the CD-ROM, you can do the following

things on your computer.

CameraWindow

 Import images and change camera settings

ImageBrowserEX

 Manage images: view, search, and organize

 Print and edit images

AutoUpdateFunction

Using the included software, you can update to the latest version, and

download new functions via the Internet (some software excluded). Be sure

to install the software on a computer with an Internet connection so you can

use this function.

• Internet access is required to use this function, and any ISP account

charges and access fees must be paid separately.

PDF Manuals

CameraUserGuide

 Refer to this guide for a more in-depth understanding of camera

operation.

SoftwareGuide

 Refer to this guide when using the included software. The guide can be

accessed from the help system of included software (some software

excluded).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

System Requirements

The included software can be used on the following computers. Adobe

Reader is required to view the PDF manuals.

Operating

System*

Windows Macintosh

Windows 8

Windows 7 SP1

Windows Vista SP2

Windows XP SP3

Mac OS X 10.6

Mac OS X 10.7

Mac OS X 10.8*

Computer

Computers running one of the above operating systems

(preinstalled), with an included USB port and Internet connection

Processor

Still images: 1.6 GHz or higher,

Movies: Core 2 Duo 1.66 GHz

or higher

Mac OS X 10.7 – 10.8: Core 2

Duo or higher,

Mac OS X 10.6: Core Duo

1.83 GHz or higher

RAM

Still images

Windows 8 (64 bit), Windows 7

(64 bit): 2 GB or more

Windows 8 (32 bit), Windows 7

(32 bit), Windows Vista: 1 GB

or more

Windows XP: 512 MB or more

Movies

1 GB or more

Mac OS X 10.7 – 10.8: 2 GB

or more,

Mac OS X 10.6: 1 GB or more

Interfaces USB and Wi-Fi

FreeHardDisk

Space

440 MB or more*

550 MB or more*

Display 1024 x 768 resolution or higher

*1 Wi-Fi image transfer to a computer requires Windows 8, Windows 7 SP1, Mac OS X

10.6.8, Mac OS X 10.7, or Mac OS X 10.8.2 or later.

*2 Information on computer models compatible with Mac OS X 10.8 is available on the

Apple website.

*3 Includes Silverlight 5.1 (max. 100 MB). Additionally, in Windows XP, Microsoft .NET

Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some

time, depending on computer performance.

• Check the Canon website for the latest system requirements, including

supported OS versions.

Installing the Software

Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.

Using the software auto update function, you can update to the latest

version and download new functions via the Internet (some software

excluded), so be sure to install the software on a computer with an Internet

connection.

Whatyouwillneed:

 Computer

 Interface cable (=

 Included CD-ROM (DIGITAL CAMERA Solution Disk) (=

1 InserttheCD-ROMinthe

computer’sCD-ROMdrive.

 Insert the included CD-ROM (DIGITAL

CAMERA Solution Disk) (=

2) in the

computer’s CD-ROM drive.

 On a Macintosh computer, after inserting

the disc, double-click the desktop disc

icon to open it, and then double-click the

[

] icon displayed.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

2 Begintheinstallation.

 Click [Easy Installation] and follow the

on-screen instructions to complete the

installation process.

3 Whenamessageisdisplayed

promptingyoutoconnect

thecamera,connectittoa

computer.

 With the camera turned off, open the

cover (

). With the smaller plug of the

included interface cable (=

2) in the

orientation shown, insert the plug fully

into the camera terminal (

 Insert the larger plug of the interface

cable in the computer’s USB port. For

details about USB connections on the

computer, refer to the computer user

manual.

4 Installtheles.

 Turn the camera on, and follow the

on-screen instructions to complete the

installation process.

 The software will connect to the Internet

to update to the latest version and

download new functions. Installation may

take some time, depending on computer

performance and the Internet connection.

 Click [Finish] or [Restart] on the screen

after installation and remove the CD-

ROM when the desktop is displayed.

 Turn the camera off and disconnect the

cable.

• When not connected to the Internet, there are the following limitations.

- The screen in step 3 will not be displayed.

- Some functions may not be installed.

• The rst time you connect the camera to the computer, drivers will be installed,

so it may take a few minutes until camera images are accessible.

• If you have several cameras that were bundled with ImageBrowser EX on the

included CD-ROMs, be sure to use each camera with their included CD-ROM

and follow the on-screen installation instructions for each. Doing so will ensure

that each camera will receive the correct updates and new functions via the

auto update function.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Saving Images to a Computer

Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.

1 Connectthecameratothe

computer.

 Follow step 3 in “Installing the Software”

20) to connect the camera to a

computer.

2 Turnthecameraontoaccess

CameraWindow.

 Press the <

> button to turn the camera on.

 On a Macintosh computer, CameraWindow is

displayed when a connection is established

between the camera and computer.

 For Windows, follow the steps introduced

below.

 In the screen that displays, click the [ ]

link to modify the program.

 Choose [Downloads Images From Canon

Camera using Canon CameraWindow]

and then click [OK].

 Double click [ ].

3 Savetheimagestothe

computer.

 Click [Import Images from Camera], and

then click [Import Untransferred Images].

 Images are now saved to the Pictures

folder on the computer, in separate

folders named by date.

 After images are saved, close

CameraWindow, press the <1> button

to turn the camera off, and unplug the

cable.

 For instructions on viewing images on

a computer, refer to the Software Guide

18).

• In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in the

taskbar.

• To start CameraWindow in Windows Vista or XP, click [Downloads Images

From Canon Camera using Canon CameraWindow] on the screen displayed

when you turn the camera on in step 2. If CameraWindow is not displayed,

click the [Start] menu and choose [All Programs]

►

[Canon Utilities]

►

[CameraWindow]

►

[CameraWindow].

• On a Macintosh computer, if CameraWindow is not displayed after step 2, click

the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop).

CameraWindow

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

• Although you can save images to a computer simply by connecting your

camera to the computer without using the software, the following limitations

apply.

- It may take a few minutes after you connect the camera to the computer until

camera images are accessible.

- Images shot in vertical orientation may be saved in horizontal orientation.

- Image protection settings may be cleared from images saved to a computer.

- Some problems may occur when saving images or image information,

depending on the operating system version, the software in use, or image

le sizes.

- Some functions provided by the software may not be available, such as

movie editing.

Using the PDF Manuals

CameraUserGuide

 Access this guide by double-clicking the desktop shortcut icon.

SoftwareGuide

 The guide can be accessed from the help system of included software

(some software excluded).

• It may not be possible to install the PDF manuals on computers that do not

meet the system requirements (=

19). However, you can view the manuals

on a computer that supports Adobe Reader by copying the PDF les in the

Readme folder on the CD-ROM directly to a convenient location on the

computer.

System Map

Wrist Strap

WS-800

Battery Pack

NB-11L*

Battery Charger

CB-2LF/

CB-2LFE*

DIGITAL

CAMERA

Solution Disk

Interface Cable IFC-400PCU*

Memory Card Card Reader

Windows/

Macintosh

Computer

TV/Video

System

AC Adapter Kit

ACK-DC90

High-Power Flash

HF-DC2*

Included

Accessories

Power

FlashUnit Canon-brandPictBridge-

CompatiblePrinters

Cable

AV Cable AVC-DC400

*1 Also available for purchase separately.

*2 High-Power Flash HF-DC1 also supported.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

UseofgenuineCanonaccessoriesisrecommended.

This product is designed to achieve excellent performance when used with genuine

Canon accessories.

Canon shall not be liable for any damage to this product and/or accidents such as re,

etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage

and/or explosion of a battery pack). Please note that this warranty does not apply to

repairs arising out of the malfunction of non-genuine Canon accessories, although you

may request such repairs on a chargeable basis.

Note that availability varies by area, and some accessories may no longer be

available.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

CameraBasics

AdvancedGuide

Camera Basics

Practical guide that introduces other camera basics and

describes shooting and playback options

On/Off........................................25

ShutterButton..........................26

ShootingDisplayOptions.......26

FUNC.Menu..............................27

MENUMenu..............................28

IndicatorDisplay......................29

Clock.........................................29

Advanced Guide

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

CameraBasics

AdvancedGuide

On/Off

ShootingMode

 Press the power button to turn the

camera on and prepare for shooting.

 To turn the camera off, press the power

button again.

PlaybackMode

 Press the <1> button to turn the camera

on and view your shots.

 To turn the camera off, press the <1>

button again.

• To switch to Playback mode from Shooting mode, press the <1> button.

• To switch to Shooting mode from Playback mode, press the shutter button

halfway (=

26).

• The lens will be retracted after about one minute once the camera is in

Playback mode. You can turn the camera off when the lens is retracted by

pressing the <1> button.

Power-Saving Features (Auto Power Down)

As a way to conserve battery power, the camera automatically deactivates

the screen (Display Off) and then turns itself off after a specic period of

inactivity.

PowerSavinginShootingMode

The screen is automatically deactivated after about one minute of inactivity.

In about two more minutes, the lens is retracted and the camera turns itself

off. To activate the screen and prepare for shooting when the screen is off

but the lens is still out, press the shutter button halfway (=

26).

PowerSavinginPlaybackMode

The camera turns itself off automatically after about ve minutes of

inactivity.

• You can deactivate Auto Power Down and adjust the timing of Display Off, if

you prefer (=

109).

• Power saving is not active while the camera is connected to a computer via

the interface cable (=

21), or when connected to other devices via Wi-Fi

83).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

CameraBasics

AdvancedGuide

Shutter Button

To ensure your shots are in focus, always begin by holding the shutter

button halfway down, and once the subject is in focus, press the button all

the way down to shoot.

In this manual, shutter button operations are described as pressing the

button halfway or all the way down.

1 Presshalfway.(Presslightlyto

focus.)

 Press the shutter button halfway. The

camera beeps twice, and AF frames are

displayed around image areas in focus.

2 Pressallthewaydown.(From

thehalfwayposition,pressfully

toshoot.)

 The camera shoots, as a shutter sound

is played.

 Keep the camera still until the shutter

sound ends.

• Images may be out of focus if you shoot without initially pressing the

shutter button halfway.

• Length of shutter sound playback varies depending on the time

required for the shot. It may take longer in some shooting scenes,

and images will be blurry if you move the camera (or the subject

moves) before the shutter sound ends.

Shooting Display Options

Press the button to view other information on the screen, or to hide

the information. For details on the information displayed, see On-Screen

Information (=

131).

Information is displayed No information is

displayed

• Screen brightness is automatically increased by the night display function

when you are shooting under low light, making it easier to check how shots

are composed. However, on-screen image brightness may not match the

brightness of your shots. Note that any on-screen image distortion or jerky

subject motion will not affect recorded images.

• For playback display options, see Switching Display Modes (=

68).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

CameraBasics

AdvancedGuide

FUNC. Menu

Congure commonly used functions through the FUNC. menu as follows.

Note that menu items and options vary depending on the shooting mode

135 – 136) or playback mode (=

139).

1 AccesstheFUNC.menu.

 Press the <m> button.

2 Chooseamenuitem.

 Press the <o> buttons to choose a

menu item, and then press the <m> or

<r> button.

 In some menu items, functions can be

specied simply by pressing the <m>

or <r> button, or another screen is

displayed for conguring the function.

3 Chooseanoption.

 Press the <o> buttons to choose

an option.

 Options labeled with a [ ] icon can be

congured by pressing the <n>

button.

 To return to the menu items, press the

<q> button.

Options

Menu Items

4 Finishthesetupprocess.

 Press the <m> button.

 The screen before you pressed the

<m> button in step 1 is displayed again,

showing the option you congured.

• To undo any accidental setting changes, you can restore the camera’s default

settings (=

112).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

CameraBasics

AdvancedGuide

MENU Menu

Congure a variety of camera functions through other menus as follows.

Menu items are grouped by purpose on tabs, such as shooting [4],

playback [1], and so on. Note that available settings vary depending on

the selected shooting or playback mode (=

137 – 139).

1 Accessthemenu.

 Press the <n> button.

2 Chooseatab.

 Move the zoom lever to choose a tab.

 After you have pressed the <o>

buttons to choose a tab initially, you can

switch between tabs by pressing the

<q><r> buttons.

3 Chooseasetting.

 Press the <o> buttons to choose a

setting.

 To choose settings with options not

shown, rst press the <m> or <r>

button to switch screens, and then press

the <o> buttons to select the

setting.

 To return to the previous screen, press

the <n> button.

4 Chooseanoption.

 Press the <q><r> buttons to choose an

option.

5 Finishthesetupprocess.

 Press the <n> button to return to the

screen displayed before you pressed the

<n> button in step 1.

• To undo any accidental setting changes, you can restore the camera’s default

settings (=

112).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

CameraBasics

AdvancedGuide

Indicator Display

The indicator on the back of the camera (=

3) lights up or blinks

depending on the camera status.

Color

Indicator

Status

CameraStatus

Green

Connected to a computer (=

21), or display off

25, 108, 109)

Blinking

Starting up, recording/reading/transmitting images,

shooting long exposures (=

52), or connected/

transmitting via Wi-Fi

• When the indicator blinks green, never turn the camera off, open the

memory card/battery cover, or shake or jolt the camera, which may

corrupt images or damage the camera or memory card.

Clock

You can check the current time.

 Press and hold the <m> button.

 The current time appears.

 If you hold the camera vertically while

using the clock function, it will switch

to vertical display. Press the <q><r>

buttons to change the display color.

 Press the <m> button again to cancel

the clock display.

• When the camera is off, press and hold the <m> button, then press the power

button to display the clock.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Smart Auto Mode

Convenient mode for easy shots with greater control

over shooting

Shooting(SmartAuto).............31

Common,Convenient

Features...................................35

ImageCustomization

Features...................................38

HelpfulShootingFeatures......40

CustomizingCamera

Operation.................................42

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Still Images Movies

Shooting (Smart Auto)

For fully automatic selection at optimal settings for specic scenes, simply

let the camera determine the subject and shooting conditions.

1 Turnthecameraon.

 Press the power button.

 The startup screen is displayed.

2 Enter[

]mode.

 Set the mode switch to [

 Aim the camera at the subject. The

camera will make a slight clicking noise

as it determines the scene.

 Icons representing the scene and image

stabilization mode are displayed in the

upper right of the screen (=

33, 34).

 Frames displayed around any detected

subjects indicate that they are in focus.

3 Composetheshot.

 To zoom in and enlarge the subject, move

the zoom lever toward (telephoto),

and to zoom away from the subject, move

it toward <j> (wide angle). (A zoom bar

showing the zoom position is displayed.)

Zoom Bar

4 Shoot.

ShootingStillImages

Focus.

 Press the shutter button halfway. The

camera beeps twice after focusing, and

AF frames are displayed to indicate

image areas in focus.

 Several AF frames are displayed when

multiple areas are in focus.

Shoot.

 Press the shutter button all the way

down.

 As the camera shoots, a shutter sound

is played, and in low-light conditions, the

ash res automatically.

 Keep the camera still until the shutter

sound ends.

 Your shot is only displayed until the

camera is ready to shoot again.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

ShootingMovies

Startshooting.

 Press the movie button. The camera

beeps once as recording begins, and

[

Rec] is displayed with the elapsed

time.

 Black bars displayed on the top and

bottom edges of the screen indicate

image areas not recorded.

 Frames displayed around any detected

faces indicate that they are in focus.

 Once recording begins, take your nger

off the movie button.

Resizethesubjectand

recomposetheshotasneeded.

 To resize the subject, repeat the

operations in step 3 (=

31). However,

note that the sound of camera operations

will be recorded.

 When you recompose shots, the

focus, brightness, and colors will be

automatically adjusted.

Finishshooting.

 Press the movie button again to stop

shooting. The camera beeps twice as

recording stops.

 Recording will stop automatically when

the memory card becomes full.

Elapsed Time

StillImages/Movies

• If the camera is turned on while the button is held down, the

camera will no longer sound. To activate sounds again, press the

<n> button and choose [Mute] on the [3] tab, and then press

the <q><r> buttons to choose [Off].

StillImages

• A ashing [ ] icon warns that images are more likely to be blurred

by camera shake. In this case, mount the camera on a tripod or take

other measures to keep it still.

• If your shots are dark despite the ash ring, move closer to the

subject. For details on the ash range, see Flash Range (=

142).

• The subject may be too close if the camera only beeps once when

you press the shutter button halfway. For details on the focusing

range (shooting range), see Shooting Range (=

142).

• To reduce red-eye and to assist in focusing, the lamp may be

activated when shooting in low-light conditions.

• A blinking [h] icon displayed when you attempt to shoot indicates

that shooting is not possible until the ash has nished recharging.

Shooting can resume as soon as the ash is ready, so either press

the shutter button all the way down and wait, or release it and press

it again.

• You can change how long images are displayed after shots (=

43).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Movies

• The camera may become warm when shooting movies repeatedly

over an extended period. This does not indicate damage.

• Keep your ngers away from the

microphone while shooting movies.

Blocking the microphone may prevent

audio from being recorded or may

cause the recording to sound mufed.

• Avoid touching camera controls other than the movie button when

shooting movies, because sounds made by the camera will be

recorded.

• Audio recording is monaural.

Microphone

Still Images Movies

Scene Icons

In [A] mode, shooting scenes determined by the camera are indicated

by the icon displayed, and corresponding settings are automatically

selected for optimal focusing, subject brightness, and color.

Subject

Background

People OtherSubjects

Icon

Background

Color

In

Motion*

Shadows

onFace*

In

Motion*

AtClose

Range

Bright

Gray

Backlit

–

WithBlue

Sky

Light Blue

Backlit

–

Sunsets

–

– Orange

Spotlights

Dark Blue

Dark

Tripod

Used

–

*1 Not displayed for movies.

*2 Displayed in dark scenes when the camera is held still, as when mounted on a tripod.

• Try shooting in [G] mode (=

54) if the scene icon does not match

actual shooting conditions, or if it is not possible to shoot with your

expected effect, color, or brightness.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Still Images Movies

Image Stabilization Icons

Optimal image stabilization for the shooting conditions is automatically

applied (Intelligent IS). Additionally, the following icons are displayed in

[

] mode.

Image stabilization for still

images

Image stabilization for movies,

reducing strong camera shake,

as when shooting while walking

(Dynamic IS)

Image stabilization for still

images, when panning*

Image stabilization for slow

camera shake, such as when

shooting movies at telephoto

(Powered IS)

Image stabilization for macro

shots (Hybrid IS)

No image stabilization, because

the camera is mounted on

a tripod or held still by other

means

* Displayed when you pan, following moving subjects with the camera. When you follow

subjects moving horizontally, image stabilization only counteracts vertical camera

shake, and horizontal stabilization stops. Similarly, when you follow subjects moving

vertically, image stabilization only counteracts horizontal camera shake.

• To cancel image stabilization, set [IS Mode] to [Off] (=

65). In this case, an

IS icon is not displayed.

Still Images Movies

On-Screen Frames

A variety of frames are displayed once the camera detects subjects you are

aiming the camera at.

• A white frame is displayed around the subject (or person’s face)

determined by the camera to be the main subject, and gray frames are

displayed around other detected faces. Frames follow moving subjects

within a certain range to keep them in focus.

However, if the camera detects subject movement, only the white frame

will remain on the screen.

• When you are pressing the shutter button halfway and the camera

detects subject movement, a blue frame is displayed, and the focus and

image brightness are constantly adjusted (Servo AF).

• Try shooting in [G] mode (=

54) if no frames are displayed, if

frames are not displayed around desired subjects, or if frames are

displayed on the background or similar areas.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Common, Convenient Features

Still Images Movies

Zooming In Closer on Subjects (Digital Zoom)

When distant subjects are too far away to enlarge using the optical zoom,

use digital zoom for up to about 32x enlargement.

1

Movethezoomlevertoward

.

 Hold the lever until zooming stops.

 Zooming stops at the largest possible zoom

factor (before the image becomes noticeably

grainy), which is then indicated on the screen.

2 Movethezoomlevertoward

again.

 The camera zooms in even closer on the

subject.

• Moving the zoom lever will display the zoom bar (which indicates

the zoom position). The color of the zoom bar will change depending

on the zoom range.

- White range: optical zoom range where the image will not appear grainy.

- Yellow range: digital zoom range where the image is not noticeably

grainy (ZoomPlus).

- Blue range: digital zoom range where the image will appear grainy.

Because the blue range will not be available at some resolution

settings (=

39), the maximum zoom factor can be achieved by

following step 1.

Zoom Factor

• Focal length when optical and digital zoom are combined is as follows (35mm

lm equivalent).

28 – 896 mm (28 – 224 mm with optical zoom alone)

• To deactivate digital zoom, press the <n> button, choose [Digital Zoom]

on the [4] tab, and then choose [Off].

Still Images Movies

Using the Self-Timer

With the self-timer, you can include yourself in group photos or other timed

shots. The camera will shoot about 10 seconds after you press the shutter

button.

1 Congurethesetting.

 Press the <m> button, choose [ ]

in the menu, and then choose the []]

option (=

27).

 Once the setting is complete, []] is

displayed.

2 Shoot.

 For Still Images: Press the shutter button

halfway to focus on the subject, and then

press it all the way down.

 For Movies: Press the movie button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

 Once you start the self-timer, the lamp

will blink and the camera will play a self-

timer sound.

 Two seconds before the shot, the blinking

and sound will speed up. (The lamp will

remain lit in case the ash res.)

 To cancel shooting after you have

triggered the self-timer, press the

<n> button.

 To restore the original setting, choose

[

] in step 1.

Still Images Movies

UsingtheSelf-TimertoAvoidCameraShake

This option delays shutter release until about two seconds after you have

pressed the shutter button. If the camera is unsteady while you are pressing

the shutter button, it will not affect your shot.

Congurethesetting.

 Follow step 1 in “Using the Self-Timer”

35) and choose [[].

 Once the setting is complete, [[] is

displayed.

 Follow step 2 in “Using the Self-Timer”

35) to shoot.

Still Images Movies

CustomizingtheSelf-Timer

You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).

1 Choose[$].

 Following step 1 in “Using the Self-Timer”

35), choose [$] and press the

<n> button.

2 Congurethesetting.

 Press the <o> buttons to choose

[Delay] or [Shots].

 Press the <q><r> buttons to choose a

value, and then press the <m> button.

 Once the setting is complete, [$] is

displayed.

 Follow step 2 in “Using the Self-Timer”

35) to shoot.

• For movies shot using the self-timer, [Delay] represents the delay

before recording begins, but the [Shots] setting has no effect.

• When you specify multiple shots, image brightness and white balance are

determined by the rst shot. More time is required between shots when the

ash res or when you have specied to take many shots. Shooting will stop

automatically when the memory card becomes full.

• When a delay longer than two seconds is specied, two seconds before the

shot, the lamp blinking and self-timer sound will speed up. (The lamp will

remain lit in case the ash res.)

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Still Images

Deactivating the Flash

Prepare the camera for shooting without the ash as follows.

Congurethesetting.

 Press the <r> button, press the <q><r>

buttons to choose [!], and then press

the <m> button.

 Once the setting is complete, [!] is

displayed.

 To restore the original setting, repeat this

process but choose [

• If a ashing [ ] icon is displayed when you press the shutter button

halfway in low-light conditions, mount the camera on a tripod or take

other measures to keep it still.

Still Images

Adding a Date Stamp

The camera can add the shooting date to images, in the lower-right corner.

However, note that date stamps cannot be edited or removed, so conrm

beforehand that the date and time are correct (=

13).

1 Congurethesetting.

 Press the <n> button, choose

[Date Stamp

] on the [4] tab, and

then choose the desired option (=

28).

 Once the setting is complete, [ ] is

displayed.

2 Shoot.

 As you take shots, the camera adds the

shooting date or time to the lower-right

corner of images.

 To restore the original setting, choose

[Off] in step 1.

• Date stamps cannot be edited or removed.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

• Shots taken without adding a date stamp can be printed with one as follows.

However, adding a date stamp this way to images that already have one may

cause it to be printed twice.

- Use the included software to print

For details, refer to the Software Guide (=

18).

- Print using printer functions (=

117)

- Use camera DPOF print settings (=

121) to print

Image Customization Features

Still Images

Changing the Aspect Ratio

Change the image aspect ratio (ratio of width to height) as follows.

Congurethesetting.

 Press the <m> button, choose [ ] in

the menu, and choose the desired option

27).

 Once the setting is complete, the screen

aspect ratio will be updated.

 To restore the original setting, repeat this

process but choose [

Same aspect ratio as widescreen HDTVs.

Same aspect ratio as 35mm lm, used for printing images at 5 x 7-inch or

postcard sizes.

Native aspect ratio of the camera screen, also used for display on standard-

denition televisions or similar display devices, or for printing images at 3.5 x

5-inch or A-series sizes.

Square aspect ratio.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Still Images

Changing Image Resolution (Size)

Choose from 4 levels of image resolution, as follows. For guidelines on

how many shots at each resolution setting can t on a memory card, see

Number of 4:3 Shots per Memory Card (=

141).

Congurethesetting.

 Press the <m> button, choose [ ] in

the menu, and choose the desired option

27).

 The option you congured is now

displayed.

 To restore the original setting, repeat this

process but choose [

GuidelinesforChoosingResolutionBasedonPaper

Size(for4:3Images)

 [ ]: For e-mailing images.

A2 (16.5 x 23.4 in.)

A3 – A5 (11.7 x

16.5 – 5.8 x 8.3 in.)

5 x 7 in.

Postcard

3.5 x 5 in.

Still Images

Red-Eye Correction

Red-eye that occurs in the ash photography can be automatically

corrected as follows.

1 Accessthe[FlashSettings]

screen.

 Press the <n> button, choose [Flash

Settings] on the [4] tab, and then press

the <m> button (=

28).

2 Congurethesetting.

 Choose [Red-Eye Corr.], and then

choose [On] (=

28).

 Once the setting is complete, [R] is

displayed.

 To restore the original setting, repeat this

process but choose [Off].

• Red-eye correction may be applied to image areas other than eyes (if

the camera misinterprets red eye makeup as red pupils, for example).

• You can also correct existing images (=

81).

• You can also access the screen in step 2 by pressing the <r> button and then

the <n> button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Movies

Changing Movie Image Quality

2 image quality settings are available. For guidelines on the maximum

movie length at each level of image quality that will t on a memory card,

see Recording Time per Memory Card (=

142).

Congurethesetting.

 Press the <m> button, choose [ ] in

the menu, and choose the desired option

27).

 The option you congured is now

displayed.

 To restore the original setting, repeat this

process but choose [

Image

Quality

Resolution FrameRate Details

1280 x 720 25 fps For shooting in HD

640 x 480 30 fps

For shooting in standard

denition

• In [ ] mode, black bars displayed on the top and bottom edges of the screen

indicate image areas not recorded.

Helpful Shooting Features

Still Images Movies

Displaying Grid Lines

Grid lines can be displayed on the screen for vertical and horizontal

reference while shooting.

Congurethesetting.

 Press the <n> button, choose

[Grid Lines] on the [4] tab, and then

choose [On] (=

28).

 Once the setting is complete, grid lines

are displayed on the screen.

 To restore the original setting, repeat this

process but choose [Off].

• Grid lines are not recorded in your shots.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Still Images

Magnifying the Area in Focus

You can check the focus by pressing the shutter button halfway, which will

enlarge the portion of the image in focus in the AF frame.

1 Congurethesetting.

 Press the <n> button, choose [AF-

Point Zoom] on the [4] tab, and then

choose [On] (=

28).

2 Checkthefocus.

 Press the shutter button halfway. The

face detected as the main subject is now

magnied.

 To restore the original setting, choose

[Off] in step 1.

• The area in focus will not be magnied when you press the shutter

button halfway if a face was not detected, if the person is too close

to the camera and their face is too large for the screen, or if the

camera detects subject movement.

• The display will not magnify when using the digital zoom (=

35) or Tracking

AF (=

61).

Still Images

Checking for Closed Eyes

[ ] is displayed when the camera detects that people may have closed

their eyes.

1 Congurethesetting.

 Press the <n> button, choose [Blink

Detection] on the [4] tab, and then

choose [On] (=

28).

2 Shoot.

 [ ] ashes when the camera detects a

person whose eyes are closed.

 To restore the original setting, choose

[Off] in step 1.

• When you have specied multiple shots in [$] mode, this function is only

available for the nal shot.

• A frame is displayed around people whose eyes are closed when you have

selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display Time] (=

43).

• The frame is not displayed when [Display Time] is set to [Quick] (=

43).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Customizing Camera Operation

Customize shooting functions on the [4] tab of the menu as follows.

For instructions on menu functions, see MENU Menu (=

28).

Still Images

Deactivating the AF Assist Beam

You can deactivate the lamp that normally lights up to help you focus when

you press the shutter button halfway in low-light conditions.

Congurethesetting.

 Press the <n> button, choose

[AF-assist Beam] on the [4] tab, and

then choose [Off] (=

28).

 To restore the original setting, repeat this

process but choose [On].

Still Images

Deactivating the Red-Eye Reduction Lamp

You can deactivate the red-eye reduction lamp that lights up to reduce red-

eye when the ash is used in low-light shots.

1 Accessthe[FlashSettings]

screen.

 Press the <n> button, choose

[Flash Settings] on the [4] tab, and then

press the <m> button (=

28).

2 Congurethesetting.

 Choose [Red-Eye Lamp], and then

choose [Off] (=

28).

 To restore the original setting, repeat this

process but choose [On].

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SmartAuto

Mode

Still Images

Changing the Image Display Style After Shots

You can change how long images are displayed and what information is

displayed immediately after shooting.

ChangingtheImageDisplayPeriodAfterShots

1 Accessthe[Reviewimageafter

shooting]screen.

 Press the <n> button, choose

[Review image after shooting] on the [4]

tab, and then press the <m> button.

2 Congurethesetting.

 Press the <o> buttons to choose

[Display Time]. Press the <q><r>

buttons to choose the desired option

28).

 To restore the original setting, repeat this

process but choose [Quick].

Quick Displays images only until you can shoot again.

2 sec., 4 sec.,

8 sec.

Displays images for the specied time. Even while the shot is displayed,

you can take another shot by pressing the shutter button halfway again.

Hold Displays images until you press the shutter button halfway.

Off No image display after shots.

Still Images

ChangingtheScreenDisplayedAfterShots

1 Set[DisplayTime]to[2sec.],

[4sec.],[8sec.],or[Hold]



43).

2 Congurethesetting.

 Press the <o> buttons to choose

[Display Info]. Press the <q><r> buttons

to choose the desired option (=

28).

 To restore the original setting, repeat this

process but choose [Off].

Off Displays only the image.

Detailed

Displays shooting details (=

132).

• When [Display Time] is set to [Off] or [Quick] (=

43), [Display Info] is set to

[Off] and cannot be changed.

• By pressing the button while an image is displayed after shooting, you

can switch the display information. Note that the settings of [Display Info] on

the [4] tab cannot be changed. By pressing the <m> button, you can do the

following operations.

- Protect (=

72)

- Favorites (=

77)

- Erase (=

74)

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Other Shooting Modes

Shoot more effectively in various scenes, and take shots

enhanced with unique image effects or captured using

special functions

SpecicScenes........................45

ApplyingSpecialEffects.........46

SpecialModesforOther

Purposes.................................50

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Specic Scenes

Choose a mode matching the shooting scene, and the camera will

automatically congure the settings for optimal shots.

1 Enter<4>mode.

 Set the mode switch to <4>.

2 Chooseashootingmode.

 Press the <m> button, choose [G] in the

menu, and then choose a shooting mode

27).

3 Shoot.

Still Images Movies

IShootportraits(Portrait)

 Take shots of people with a softening

effect.

Still Images

 Shootunderlowlight(Low

Light)

 Shoot with minimal camera shake and

subject blur even in low-light conditions.

Still Images Movies

PShootwithsnowybackgrounds

(Snow)

 Bright, natural-colored shots of people

against snowy backgrounds.

Still Images Movies

tShootreworks(Fireworks)

 Vivid shots of reworks.

• In [t] mode, mount the camera on a tripod or take other measures

to keep it still and prevent camera shake. Additionally, you should

set [IS Mode] to [Off] when using a tripod or other means to hold the

camera still (=

65).

• [ ] mode resolution is [ ] (2304 x 1728) and cannot be changed.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Applying Special Effects

Add a variety of effects to images when shooting.

1 Chooseashootingmode.

 Follow steps 1 – 2 in “Specic Scenes”

45) to choose a shooting mode.

2 Shoot.

Still Images Movies

 Shootinvividcolors(Super

Vivid)

 Shots in rich, vivid colors.

Still Images Movies

 Posterizedshots(PosterEffect)

 Shots that resemble an old poster or

illustration.

• In [ ] and [ ] modes, try taking some test shots rst, to make sure

you obtain the desired results.

Still Images

Shooting with a Fish-Eye Lens Effect

(Fish-eye Effect)

Shoot with the distorting effect of a sh-eye lens.

1 Choose[ ].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [ ].

2 Chooseaneffectlevel.

 Press the button, press the

<q><r> buttons to choose an effect

level, and then press the <m> button.

 A preview is shown of how your shot will

look with the effect applied.

3 Shoot.

• Try taking some test shots rst, to make sure you obtain the desired

results.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Still Images Movies

Shots Resembling Miniature Models

(Miniature Effect)

Creates the effect of a miniature model, by blurring image areas above and

below your selected area.

You can also make movies that look like scenes in miniature models by

choosing the playback speed before the movie is recorded. People and objects

in the scene will move quickly during playback. Note that sound is not recorded.

1 Choose[ ].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [ ].

 A white frame is displayed, indicating the

image area that will not be blurred.

2 Choosetheareatokeepin

focus.

 Press the button.

 Move the zoom lever to resize the frame,

and press the <o> buttons to move

it.

3 Formovies,choosethemovie

playbackspeed.

 Press the <

> button, and then press

the <

> buttons to choose the speed.

4 Returntotheshootingscreen

andshoot.

 Press the <n> button to return to the

shooting screen, and then shoot.

PlaybackSpeedandEstimatedPlaybackTime

(forOne-MinuteClips)

Speed PlaybackTime

Approx. 12 sec.

Approx. 6 sec.

Approx. 3 sec.

• The zoom is not available when shooting movies. Be sure to set the

zoom before shooting.

• Try taking some test shots rst, to make sure you obtain the desired

results.

• To switch the orientation of the frame to vertical, press the <q><r> buttons

in step 2. To move the frame, press the <q><r> buttons again. To return the

frame to horizontal orientation, press the <o> buttons.

• Holding the camera vertically will change the orientation of the frame.

• Movie image quality is [

] at an aspect ratio of [ ] and [ ] at an aspect

ratio of [

] (=

38). These quality settings cannot be changed.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Still Images

Shooting with a Toy Camera Effect

(Toy Camera Effect)

This effect makes images resemble shots from a toy camera by vignetting

(darker, blurred image corners) and changing the overall color.

1 Choose[ ].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [ ].

2 Chooseacolortone.

 Press the button, press the

<q><r> buttons to choose a color tone,

and then press the <m> button.

 A preview is shown of how your shot will

look with the effect applied.

3 Shoot.

Standard Shots resemble toy camera images.

Warm Images have a warmer tone than with [Standard].

Cool Images have a cooler tone than with [Standard].

• Try taking some test shots rst, to make sure you obtain the desired

results.

Still Images Movies

Shooting in Monochrome

Shoot images in black and white, sepia, or blue and white.

1 Choose[ ].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [ ].

2 Chooseacolortone.

 Press the button, press the

<q><r> buttons to choose a color tone,

and then press the <m> button.

 A preview is shown of how your shot will

look with the effect applied.

3 Shoot.

B/W Black and white shots.

Sepia Sepia tone shots.

Blue Blue and white shots.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Still Images Movies

Shooting with Color Accent

Choose a single image color to keep and change other colors to black and white.

1 Choose[T].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [T].

2 Accessthesettingscreen.

 Press the button.

 The original image and the Color Accent

image are displayed one after another.

 By default, green is the color that will be

kept.

3 Specifythecolor.

 Position the center frame over the color

to keep, and then press the <q> button.

 The specied color is recorded.

4 Specifytherangeofcolorsto

keep.

 Press the <o> buttons to adjust the

range.

 To keep only your specied color, choose

a large negative value. To keep colors

similar to your specied color as well,

choose a large positive value.

 Press the <m> button to return to the

shooting screen.

5 Shoot.

Recorded Color

• Using the ash in this mode may cause unexpected results.

• In some shooting scenes, images may look grainy and colors may

not look as expected.

Still Images Movies

Shooting with Color Swap

You can replace one image color with another before shooting. Note that

only one color can be replaced.

1 Choose[Y].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [Y].

2 Accessthesettingscreen.

 Press the button.

 The original image and the Color Swap

image are displayed one after another.

 By default, green will be replaced with

gray.

3 Specifythecolortoreplace.

 Position the center frame over the color

to replace, and then press the <q>

button.

 The specied color is recorded.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

4 Specifythenewcolor.

 Position the center frame over the new

color, and then press the <r> button.

 The specied color is recorded.

5 Specifytherangeofcolorsto

replace.

 Press the <o> buttons to adjust the

range.

 To replace only your specied color,

choose a large negative value. To replace

colors similar to your specied color as

well, choose a large positive value.

 Press the <m> button to return to the

shooting screen.

6 Shoot.

• Using the ash in this mode may cause unexpected results.

• In some shooting scenes, images may look grainy and colors may

not look as expected.

Special Modes for Other Purposes

Still Images

Auto Shooting After Face Detection

(Smart Shutter)

AutoShootingAfterSmileDetection

The camera shoots automatically after detecting a smile, even without you

pressing the shutter button.

1 Choose[ ].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [ ], and then

press the button.

 Press the <q><r> buttons to choose

[

], and then press the <m> button.

 The camera now enters shooting standby

mode, and [Smile Detection on] is displayed.

2 Aimthecameraataperson.

 Each time the camera detects a smile, it

will shoot after the lamp lights up.

 To pause smile detection, press the <q>

button. Press the <q> button again to

resume detection.

• Switch to another mode when you nish shooting, or the camera will

continue shooting each time a smile is detected.

• You can also shoot as usual by pressing the shutter button.

• The camera can detect smiles more easily when subjects face the camera and

open their mouth wide enough so that teeth are visible.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

• To change the number of shots, press the <o> buttons after choosing

[

] in step 1. [Blink Detection] (=

41) is only available for the nal shot.

Still Images

UsingtheWinkSelf-Timer

Aim the camera at a person and press the shutter button all the way down.

The camera will shoot about two seconds after a wink is detected.

1 Choose[ ].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [ ], and then

press the button.

 Press the <q><r> buttons to choose

[

], and then press the <m> button.

2 Composetheshotandpress

theshutterbuttonhalfway.

 Make sure a green frame is displayed

around the face of the person who will

wink.

3 Presstheshutterbuttonallthe

waydown.

 The camera now enters shooting standby

mode, and [Wink to take picture] is

displayed.

 The lamp blinks and the self-timer sound

is played.

4 Facethecameraandwink.

 The camera will shoot about two seconds

after detecting a wink by the person

whose face is inside the frame.

 To cancel shooting after you have

triggered the self-timer, press the

<n> button.

• If the wink is not detected, wink again slowly and deliberately.

• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.

• Closing and opening both eyes at once will also be detected as a wink.

• If winking is not detected, the camera will shoot about 15 seconds later.

• To change the number of shots, press the <o> buttons after choosing

[

] in step 1. [Blink Detection] (=

41) is only available for the nal shot.

• If no one is in the shooting area when the shutter button is pressed all the way

down, the camera will shoot after a person enters the shooting area and winks.

Still Images

UsingtheFaceSelf-Timer

The camera will shoot about two seconds after detecting that the face of

another person (such as the photographer) has entered the shooting area

61). This is useful when including yourself in group photos or similar

shots.

1 Choose[ ].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [ ], and then

press the button.

 Press the <q><r> buttons to choose

[

], and then press the <m> button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

2 Composetheshotandpress

theshutterbuttonhalfway.

 Make sure a green frame is displayed

around the face you focus on and white

frames around other faces.

3 Presstheshutterbuttonallthe

waydown.

 The camera now enters shooting standby

mode, and [Look straight at camera to

start count down] is displayed.

 The lamp blinks and the self-timer sound

is played.

4 Jointhesubjectsinthe

shootingareaandlookatthe

camera.

 After the camera detects a new face, the

lamp blinking and self-timer sound will

speed up. (When the ash res, the lamp

will remain lit.) About two seconds later,

the camera will shoot.

 To cancel shooting after you have

triggered the self-timer, press the

<n> button.

• Even if your face is not detected after you join the others in the shooting area,

the camera will shoot about 15 seconds later.

• To change the number of shots, press the <o> buttons after choosing

[

] in step 1. [Blink Detection] (=

41) is only available for the nal shot.

Still Images

Shooting Long Exposures (Long Shutter)

Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this

case, mount the camera on a tripod or take other measures to prevent

camera shake.

1 Choose[N].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [N].

2 Choosetheshutterspeed.

 Press the <o> button, press the

<q><r> buttons to choose the shutter

speed, and then press the <m> button.

3 Checktheexposure.

 Press the shutter button halfway to view

the exposure for your selected shutter

speed.

4 Shoot.

• On-screen image brightness in step 3, when you pressed the

shutter button halfway, may not match the brightness of your shots.

• With shutter speeds of 1.3 seconds or slower, there will be a delay

before you can shoot again, as the camera processes images to

reduce noise.

• Set [IS Mode] to [Off] when using a tripod or other means to hold the

camera still (=

65).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

• If the ash res, your shot may be overexposed. In this case, set the ash to

[!] and shoot again.

Still Images

Shooting Stitch Assist Images

Shoot a large subject by taking multiple shots at various positions, and then

use the software (=

18) to combine them into a panorama.

1 Choose[x]or[v].

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [x] or [v].

2 Taketherstshot.

 The rst shot will determine the exposure

and white balance.

3 Takeadditionalshots.

 Compose the second shot so that it

partially overlaps the image area of the

rst shot.

 Minor misalignment of overlapping

portions will be corrected automatically

when the images are combined.

 You can take up to 26 shots, the same

way you took the second shot.

4 Finishshooting.

 Press the <m> button.

5 Usethesoftwaretocombinethe

images.

 For instructions on merging images, refer

to the Software Guide (=

18).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

P Mode

More discerning shots, in your preferred shooting style

• Instructions in this chapter apply to the camera in [G] mode, with the

mode switch set to <4>.

• [G]: Program AE; AE: Auto Exposure

• Before using a function introduced in this chapter in modes other than

[G], make sure the function is available in that mode (=

134 – 138).

ShootinginProgramAE

([P]Mode)................................55

ImageBrightness

(ExposureCompensation).....55

ColorandContinuous

Shooting..................................57

ShootingRangeand

Focusing..................................60

Flash..........................................64

OtherSettings..........................65

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

Still Images Movies

Shooting in Program AE ([P] Mode)

You can customize many function settings to suit your preferred shooting

style.

1 Enter[G]mode.

 Follow steps 1 – 2 in “Specic Scenes”

45) and choose [G].

2 Customizethesettingsas

desired(=



55–65),and

thenshoot.

• If adequate exposure cannot be obtained when you press the shutter button

halfway, shutter speeds and aperture values are displayed in orange. In this

case, try adjusting the ISO speed (=

56) or activating the ash (if subjects

are dark, =

64), which may enable adequate exposure.

• Movies can be recorded in [G] mode as well, by pressing the movie button.

However, some <H> and <n> settings may be automatically

adjusted for movie recording.

• For details on the shooting range in [G] mode, see Shooting Range (=

142).

Image Brightness (Exposure Compensation)

Still Images Movies

Adjusting Image Brightness (Exposure Compensation)

The standard exposure set by the camera can be adjusted in 1/3-stop

increments, in a range of –2 to +2.

 Press the <o> button. As you watch

the screen, press the <q><r> buttons

to adjust brightness, and then press the

<o> button again when nished.

 The correction level you specied is now

displayed.

 When shooting movies, shoot with the

exposure compensation bar displayed.

 When shooting still images, press the

<m> button to display the set exposure

compensation amount, and then shoot.

• You can also shoot still images with exposure compensation bar displayed.

• While recording a movie, [&] is displayed, and the exposure is locked.

Still Images

Locking Image Brightness/Exposure (AE Lock)

Before shooting, you can lock the exposure, or you can specify focus and

exposure separately.

1 Deactivatetheash(=



37).

2 Locktheexposure.

 Aim the camera at the subject to shoot with

the exposure locked. With the shutter button

pressed halfway, press the <

> button.

Exposure Compensation Bar

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

 [&] is displayed, and the exposure is

locked.

 To unlock AE, release the shutter button

and press the <o> button again. In this

case, [&] is no longer displayed.

3 Composetheshotandshoot.

• AE: Auto Exposure

Still Images

Changing the Metering Method

Adjust the metering method (how brightness is measured) to suit shooting

conditions as follows.

 Press the <m> button, choose [ ] in

the menu, and choose the desired option

27).

 The option you congured is now

displayed.

Evaluative

For typical shooting conditions, including backlit shots.

Automatically adjusts exposure to match the shooting conditions.

Center

Weighted Avg.

Determines the average brightness of light across the entire

image area, calculated by treating brightness in the central area

as more important.

Spot

Metering restricted to within the [

] (Spot AE Point frame),

displayed in the center of the screen.

Still Images

Changing the ISO Speed

 Press the <m> button, choose [ ] in

the menu, and choose the desired option

27).

 The option you congured is now

displayed.

Automatically adjusts the ISO speed to suit the shooting mode and

conditions.

Low

High

For shooting outdoors in fair weather.

For shooting in cloudy conditions, or at twilight.

For shooting night scenes, or in dark rooms.

• To view the automatically set ISO speed when the camera is set to [ ], press

the shutter button halfway.

• Although choosing a lower ISO speed may reduce image graininess, there

may be a greater risk of subject blurriness in some shooting conditions.

• Choosing a higher ISO speed will increase shutter speed, which may reduce

subject blurriness and increase the ash range. However, shots may look

grainy.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

Still Images

Correcting Image Brightness (i-Contrast)

Before shooting, excessively bright or dark image areas (such as faces or

backgrounds) can be detected and automatically adjusted to the optimal

brightness. Insufcient overall image contrast can also be automatically

corrected before shooting to make subjects stand out better.

 Press the <n> button, choose

[i-Contrast] on the [4] tab, and then

choose [Auto] (=

28).

 Once the setting is complete, [@] is

displayed.

• Under some shooting conditions, correction may be inaccurate or

may cause images to appear grainy.

• You can also correct existing images (=

80).

Color and Continuous Shooting

Still Images Movies

Adjusting White Balance

By adjusting white balance (WB), you can make image colors look more

natural for the scene you are shooting.

 Press the <m> button, choose [ ] in

the menu, and choose the desired option

27).

 The option you congured is now

displayed.

Auto

Automatically sets the optimal white balance for the shooting

conditions.

Day Light For shooting outdoors in fair weather.

Cloudy For shooting in cloudy conditions, in the shade, or at twilight.

Tungsten

For shooting under ordinary incandescent (tungsten) lighting

and similarly colored uorescent lighting.

Fluorescent

For shooting under warm-white (or similarly colored) or cool-

white uorescent lighting.

Fluorescent H

For shooting under daylight uorescent and similarly colored

uorescent lighting.

Custom

For manually setting a custom white balance (=

58).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

Still Images Movies

CustomWhiteBalance

For image colors that look natural under the light in your shot, adjust white

balance to suit the light source where you are shooting. Set the white

balance under the same light source that will illuminate your shot.

 Follow the steps in “Adjusting White

Balance” (=

57) to choose [ ].

 Aim the camera at a plain white subject,

so that the entire screen is white. Press

the <n> button.

 The tint of the screen changes once the

white balance data has been recorded.

• Colors may look unnatural if you change camera settings after

recording white balance data.

Still Images Movies

Changing Image Color Tones (My Colors)

Change image color tones as desired, such as converting images to sepia

or black and white.

 Press the <m> button, choose [ ] in

the menu, and choose the desired option

27).

 The option you congured is now

displayed.

My Colors Off ―

Vivid

Emphasizes contrast and color saturation, making images sharper.

Neutral

Tones down contrast and color saturation for subdued images.

Sepia Creates sepia tone images.

B/W Creates black and white images.

Positive Film

Combines the effects of Vivid Blue, Vivid Green, and Vivid

Red to produce intense yet natural-looking colors resembling

images on positive lm.

Lighter Skin Tone Lightens skin tones.

Darker Skin Tone Darkens skin tones.

Vivid Blue

Emphasizes blues in images. Makes the sky, ocean, and other

blue subjects more vivid.

Vivid Green

Emphasizes greens in images. Makes mountains, foliage, and

other green subjects more vivid.

Vivid Red

Emphasizes reds in images. Makes red subjects more vivid.

Custom Color

Adjust contrast, sharpness, color saturation, and other

qualities as desired (=

59).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

• White balance (=

57) cannot be set in [ ] or [ ] modes.

• With [

] and [ ] modes, colors other than people’s skin tone may

be modied. These settings may not produce the expected results

with some skin tones.

Still Images Movies

CustomColor

Choose the desired level of image contrast, sharpness, color saturation,

red, green, blue, and skin tones in a range of 1 – 5.

1 Accessthesettingscreen.

 Follow the steps in “Changing Image

Color Tones (My Colors)” (=

58) to

choose [

], and then press the <n>

button.

2 Congurethesetting.

 Press the <o> buttons to choose

an option, and then specify the value by

pressing the <q><r> buttons.

 For stronger/more intense effects (or

darker skin tones), adjust the value to

the right, and for weaker/lighter effects

(or lighter skin tones), adjust the value to

the left.

 Press the <n> button to complete

the setting.

Still Images

Continuous Shooting

Hold the shutter button all the way down to shoot continuously.

For details on the continuous shooting speed, see Continuous Shooting

Speed (=

142).

1 Congurethesetting.

 Press the <m> button, choose

[

] in the menu, and then choose [W]

27).

 Once the setting is complete, [W] is

displayed.

2 Shoot.

 Hold the shutter button all the way down

to shoot continuously.

• Cannot be used with the self-timer (=

35) or [Blink Detection]

41).

• During continuous shooting, focus and exposure are locked at the

position/level determined when you pressed the shutter button

halfway.

• Shooting may stop momentarily or continuous shooting may slow

down depending on shooting conditions, camera settings, and the

zoom position.

• As more shots are taken, shooting may slow down.

• Shooting may slow down if the ash res.

• Continuous shooting is faster in [ ] mode (=

45).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

Shooting Range and Focusing

Still Images

Shooting Close-ups (Macro)

To restrict the focus to subjects at close range, set the camera to [e]. For

details on the focusing range, see Shooting Range (=

142).

 Press the <q> button, press the <q><r>

buttons to choose [e], and then press

the <m> button.

 Once the setting is complete, [e] is

displayed.

• If the ash res, vignetting may occur.

• In the yellow bar display area below the zoom bar, [e] will turn gray

and the camera will not focus.

• To prevent camera shake, try mounting the camera on a tripod and shooting

with the camera set to [[] (=

36).

Still Images

Shooting Distant Subjects (Innity)

To restrict the focus to distant subjects, set the camera to [u]. For details

on the focusing range, see Shooting Range (=

142).

 Press the <q> button, press the <q><r>

buttons to choose [u], and then press

the <m> button.

 Once the setting is complete, [u] is

displayed.

Still Images Movies

Digital Tele-Converter

The focal length of the lens can be increased by approximately 1.6x or 2.0x.

This can reduce camera shake because the shutter speed is faster than it would

be if you zoomed (including using digital zoom) in to the same zoom factor.

 Press the <n> button, choose

[Digital Zoom] on the [4] tab, and then

choose the desired option (=

28).

 The view is enlarged and the zoom factor

is displayed on the screen.

• The digital tele-converter cannot be used with digital zoom

35) and AF-point zoom (=

41).

• The respective focal lengths when using [1.6x] and [2.0x] are 44.8 – 358.4 mm

and 56.0 – 448.0 mm (35mm lm equivalent).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

• The shutter speed may be equivalent when you move the zoom lever all the

way toward for maximum telephoto, and when you zoom in to enlarge

the subject to the same size following step 2 in “Zooming In Closer on Subjects

(Digital Zoom)” (=

35).

Still Images Movies

Changing the AF Frame Mode

Change the AF (auto focus) frame mode to suit the shooting conditions as

follows.

 Press the <n> button, choose [AF

Frame] on the [4] tab, and then choose

the desired option (=

28).

Still Images Movies

FaceAiAF

• Detects people’s faces, and then sets the focus, exposure (evaluative

metering only), and white balance ([ ] only).

• After you aim the camera at the subject, a white frame is displayed

around the person’s face determined by the camera to be the main

subject, and up to two gray frames are displayed around other detected

faces.

• When the camera detects movement, frames will follow moving subjects,

within a certain range.

• After you press the shutter button halfway, up to nine green frames are

displayed around faces in focus.

• If faces are not detected, or when only gray frames are displayed

(without a white frame), up to nine green frames are displayed in the

areas in focus when you press the shutter button halfway.

• If faces are not detected when Servo AF (=

62) is set to [On], the

AF frame is displayed in the center of the screen when you press

the shutter button halfway.

• Examples of faces that cannot be detected:

- Subjects that are distant or extremely close

- Subjects that are dark or light

- Faces in prole, at an angle, or partly hidden

• The camera may misinterpret non-human subjects as faces.

• No AF frames are displayed if the camera cannot focus when you

press the shutter button halfway.

Still Images

ChoosingSubjectstoFocusOn(TrackingAF)

Shoot after choosing a subject to focus on as follows.

1 Choose[TrackingAF].

 Follow the steps in “Changing the AF

Frame Mode” (=

61) to choose

[Tracking AF].

 [ ] is displayed in the center of the

screen.

2 Chooseasubjecttofocuson.

 Aim the camera so that [ ] is on the

desired subject, and then press the <q>

button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

 When the subject is detected, the camera

beeps and [

] is displayed. Even if the

subject moves, the camera will continue

to track the subject within a certain range.

 If no subject is detected, [ ] is

displayed.

 To cancel tracking, press the <q> button

again.

3 Shoot.

 Press the shutter button halfway.

[

] changes to a blue [ ], which

follows the subject as the camera

continues to adjust the focus and

exposure (Servo AF) (=

62).

 Press the shutter button all the way down

to shoot.

 Even after your shot, [ ] is still

displayed and the camera continues to

track the subject.

• [Servo AF] (=

62) is set to [On] and cannot be changed.

• Tracking may not be possible when subjects are too small or move

too rapidly, or when subject color or brightness matches that of the

background too closely.

• [AF-Point Zoom] on the [4] tab is not available.

• [e] and [u] are not available.

• The camera can detect subjects even if you press the shutter button halfway

without pressing the <q> button. After your shot, [

] is displayed in the

center of the screen.

Still Images Movies

Center

One AF frame is displayed in the center. Effective for reliable focusing.

• A yellow AF frame is displayed with [ ] if the camera cannot focus

when you press the shutter button halfway. Note that AF-point

zooming (=

41) is not possible.

• To reduce the AF frame size, press the <n> button and set

[AF Frame Size] on the [4] tab to [Small] (=

28).

• The AF frame size is set to [Normal] when you use the digital zoom (=

35)

or digital tele-converter (=

60).

• To compose shots so that subjects are positioned at the edge or in a corner,

rst aim the camera to capture the subject in an AF frame, and then hold

the shutter button halfway down. As you continue to hold the shutter button

halfway, recompose the shot as desired, and then press the shutter button all

the way down (Focus Lock).

Still Images

ShootingwithServoAF

This mode helps avoid missing shots of subjects in motion, because the

camera continues to focus on the subject and adjust the exposure as long

as you press the shutter button halfway.

1 Congurethesetting.

 Press the <n> button, choose

[Servo AF] on the [4] tab, and then

choose [On] (=

28).

2 Focus.

 The focus and exposure are maintained

where the blue AF frame is displayed while

you are pressing the shutter button halfway.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

• Focusing may not be possible in some shooting conditions.

• In low-light conditions, Servo AF may not be activated (AF frames

may not turn blue) when you press the shutter button halfway. In this

case, the focus and exposure are set according to the specied AF

frame mode.

• If adequate exposure cannot be obtained, shutter speeds and

aperture values are displayed in orange. Release the shutter button,

and then press it halfway again.

• AF lock shooting is not available.

• [AF-Point Zoom] on the [4] tab is not available.

• Not available when using the self-timer (=

35).

Still Images Movies

Changing the Focus Setting

You can change default camera operation of constantly focusing on

subjects it is aimed at, even when the shutter button is not pressed. Instead,

you can limit camera focusing to the moment you press the shutter button

halfway.

 Press the <n> button, choose

[Continuous AF] on the [4] tab, and then

choose [Off] (=

28).

Helps avoid missing sudden photo

opportunities, because the camera

constantly focuses on subjects until you

press the shutter button halfway.

Off

Conserves battery power, because the

camera does not focus constantly.

Still Images Movies

Shooting with the AF Lock

The focus can be locked. After you lock the focus, the focal position will not

change even when you release your nger from the shutter button.

1 Lockthefocus.

 With the shutter button pressed halfway,

press the <q> button.

 The focus is now locked, and [%] is

displayed.

 To unlock the focus, release the shutter

button and press the <q> button again. In

this case, [%] is no longer displayed.

2 Composetheshotandshoot.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

Flash

Still Images

Activating Flash

You can have the ash re for each shot. For details on the ash range, see

Flash Range (=

142).

Congurethesetting.

 Press the <r> button, press the <q><r>

buttons to choose [h], and then press the

<m> button.

 Once the setting is complete, [h] is

displayed.

Still Images

Shooting with Slow Synchro

With this option, the ash res to increase the brightness of the main

subject (such as people) while the camera shoots at a slow shutter speed to

increase the brightness of the background that is out of the ash range.

For details on the ash range, see Flash Range (=

142).

1 Congurethesetting.

 Press the <r> button, press the <q><r>

buttons to choose [Z], and then press

the <m> button.

 Once the setting is complete, [Z] is

displayed.

2 Shoot.

 Even after the ash res, ensure that

the main subject does not move until the

shutter sound is nished playing.

• Mount the camera on a tripod or take other measures to keep it still

and prevent camera shake. Additionally, you should set [IS Mode]

to [Off] when using a tripod or other means to hold the camera still

65).

Still Images

Shooting with the FE Lock

Just as with the AE lock (=

55), you can lock the exposure for the ash

shots.

1 Settheashto[h](=



64).

2 Locktheashexposure.

 Aim the camera at the subject to shoot

with the exposure locked. With the

shutter button pressed halfway, press the

<o> button.

 The ash res, and when [(] is

displayed, the ash output level is

retained.

 To unlock FE, release the shutter button

and press the <o> button again. In this

case, [(] is no longer displayed.

3 Composetheshotandshoot.

• FE: Flash Exposure

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PMode

Other Settings

Still Images

Changing the Compression Ratio

(Image Quality)

Choose from two compression ratios, as follows: (Super Fine), (Fine).

For guidelines on how many shots at each compression ratio can t on a

memory card, see Number of 4:3 Shots per Memory Card (=

141).

Congurethesetting.

 Press the <m> button, choose [ ] in

the menu, and choose the desired option

27).

Still Images Movies

Changing the IS Mode Settings

 Press the <n> button, choose [IS

Mode] on the [4] tab, and then choose

the desired option (=

28).

Continuous

Optimal image stabilization for the

shooting conditions is automatically

applied (Intelligent IS) (=

34).

Shoot Only

Image stabilization is active only at

the moment of shooting.

Off Deactivates image stabilization.

* The setting is changed to [Continuous] for movie recording.

• If image stabilization cannot prevent camera shake, mount the

camera on a tripod or take other measures to hold it still. In this

case, set [IS Mode] to [Off].

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

Playback Mode

Have fun reviewing your shots, and browse or edit them

in many ways

• To prepare the camera for these operations, press the <1> button to

enter Playback mode.

• It may not be possible to play back or edit images that were

renamed or already edited on a computer, or images from other

cameras.

Viewing......................................67

BrowsingandFiltering

Images.....................................69

ImageViewingOptions............70

ProtectingImages....................72

ErasingImages.........................74

RotatingImages.......................76

ImageCategories.....................77

EditingStillImages..................78

EditingMovies..........................81

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

Still Images Movies

Viewing

After shooting images or movies, you can view them on the screen as

follows.

1 EnterPlaybackmode.

 Press the <1> button.

 Your last shot is displayed.

2 Browsethroughyourimages.

 To view the previous image, press the

<q> button. To view the next image,

press the <r> button.

 To access Scroll Display mode, press and

hold the <q><r> buttons for at least one

second. In this mode, press the <q><r>

buttons to browse through images.

Images appear grainy at this time.

 To return to single-image display, press

the <m> button.

 To browse images grouped by shooting

date, press the <o> buttons in

Scroll Display mode.

 Movies are identied by a [ ] icon. To

play movies, go to step 3.

3 Playmovies.

 To start playback, press the <m> button,

press the <o> buttons to choose

[

], and then press the <m> button

again.

4 Adjustthevolume.

 Press the <o> buttons to adjust the

volume. Even after the volume indicator

disappears, you can adjust the volume by

pressing the <o> buttons.

5 Pauseplayback.

 To pause or resume playback, press the

<m> button.

 After the movie is nished, [ ] is

displayed.

Volume Indicator

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

• To switch to Shooting mode from Playback mode, press the shutter button

halfway.

• To deactivate Scroll Display, press the <n> button, choose [Scroll

Display] on the [1] tab, and then choose [Off].

• If you prefer to have the most recent shot displayed when you enter Playback

mode, press the <n> button, and on the [1] tab, choose [Resume] and

then [Last shot].

• To change the transition shown between images, press the <n> button,

choose [Transition] on the [1] tab, and then press the <q><r> buttons to

choose the effect.

Still Images Movies

Switching Display Modes

Press the button to view other information on the screen, or to hide

the information. For details on the information displayed, see “Playback

(Detailed Information Display)” (=

132).

No Information

Display

Simple

Information

Display

Detailed

Information Display

Still Images Movies

OverexposureWarning(forImageHighlights)

Washed-out highlights in the image ash on the screen in detailed

information display (=

68).

Still Images Movies

Histogram

 The graph in detailed information display

68) is a histogram showing the

distribution of brightness in the image.

The horizontal axis represents the degree

of brightness, and the vertical axis, how

much of the image is at each level of

brightness. Viewing the histogram is a

way to check exposure.

Still Images Movies

GPSInformationDisplay

 Using a smartphone connected to the

camera via Wi-Fi (=

91), you can

geotag images on the camera, adding

information such as latitude, longitude,

and elevation. Geotagged images are

labeled with a [

] icon in detailed

information display. Press the <o>

button to view the information recorded.

 Latitude, longitude, elevation, and UTC

(shooting date and time) are listed from

top to bottom.

• [---] is shown instead of numerical values for items not available on

your smartphone or items not recorded correctly.

• UTC: Coordinated Universal Time, essentially the same as Greenwich Mean

Time

High

Dark

Low

Bright

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

Browsing and Filtering Images

Still Images Movies

Navigating Through Images in an Index

By displaying multiple images in an index, you can quickly nd the images

you are looking for.

1 Displayimagesinanindex.

 Move the zoom lever toward <g> to

display images in an index. Moving the

lever again will increase the number of

images shown.

 To display fewer images, move the zoom

lever toward <k>. Fewer images are

shown each time you move the lever.

2 Chooseanimage.

 Press the <o><q><r> buttons to

choose an image.

 An orange frame is displayed around the

selected image.

 Press the <m> button to view the

selected image in single-image display.

Still Images Movies

Finding Images Matching Specied Conditions

Find desired images quickly on a memory card full of images by ltering

image display according to your specied conditions. You can also protect

72) or delete (=

74) these images all at once.

People Displays images with detected faces.

Shot Date Displays the images shot on a specic date.

Favorites

Displays images tagged as favorites (=

77).

Still image/Movie Displays only still images or movies.

1 Chooseasearchcondition.

 Press the <m> button, choose

[

] in the menu, and choose a condition

27).

 When you have selected [ ] or [

choose the condition by pressing the

<o><q><r> buttons on the screen

displayed, and then press the <m>

button.

2 Viewthelteredimages.

 Images matching your conditions are

displayed in yellow frames. To view only

these images, press the <

> buttons.

 To cancel ltered display, choose [ ] in

step 1.

• When the camera has found no corresponding images for some

conditions, those conditions will not be available.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

• Options for viewing the images found (in step 2) include Navigating Through

Images in an Index (=

69), Viewing Slideshows (=

71), and Magnifying

Images (=

70). You can protect, erase, or print all images found or add

them to a photobook by choosing [Select All Images in Search] in Protecting

Images (=

72), Erasing All Images (=

75), Adding Images to the Print

List (DPOF) (=

121), or Adding Images to a Photobook (=

123).

• If you edit images and save them as new images (=

78 – 81), a message

is displayed, and the images that were found are no longer shown.

Image Viewing Options

Still Images

Magnifying Images

1 Magnifyanimage.

 Moving the zoom lever toward <k> will

zoom in and magnify the image, and

[

] is displayed. You can magnify

images up to about 10x by continuing to

hold the zoom lever.

 To zoom out, move the zoom lever

toward <g>. You can return to single-

image display by continuing to hold it.

2 Movethedisplaypositionand

switchimagesasneeded.

 To move the display position, press the

<o><q><r> buttons.

 While [ ] is displayed, you can switch

to [

] by pressing the <m> button.

To switch to other images while zoomed,

press the <q><r> buttons. Press the

<m> button again to restore the original

setting.

• You can return to single-image display from magnied display by pressing the

<n> button.

Approximate Position

of Displayed Area

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

Still Images Movies

Viewing Slideshows

Automatically play back images from a memory card as follows. Each

image is displayed for about three seconds.

Chooseaslideshowtransitionand

startplayback.

 Press the <m> button, choose [.] in

the menu, and choose the desired option

27).

 The slideshow will start a few seconds

after [Loading image] is displayed.

 Press the <n> button to stop the

slideshow.

• The camera’s power-saving functions (=

25) are deactivated

during slideshows.

• To pause or resume slideshows, press the <m> button.

• You can switch to other images during playback by pressing the <q><r>

buttons. For fast-forward or fast-rewind, hold the <q><r> buttons down.

• In image search mode (=

69), only images matching search conditions are

played.

ChangingSlideshowSettings

You can set up slideshows to repeat, and you can change the transitions

between images and the display duration of each image.

1 Accessthesettingscreen.

 Press the <n> button, and then

choose [Slideshow] on the [1] tab

71).

2 Congurethesettings.

 Choose a menu item to congure, and

then choose the desired option (=

28).

 To start the slideshow with your settings,

choose [Start] and press the <m>

button.

 To return to the menu screen, press the

<n> button.

• [Play Time] cannot be modied when [Bubble] is chosen in [Effect].

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

Still Images

Auto Playback of Similar Images (Smart Shufe)

Based on the current image, the camera offers four images similar to it that you

may wish to view. After you choose to view one of those images, the camera offers

four more images. This is an enjoyable way to play back images in an unexpected

order. Try this feature after you have taken many shots, in many kinds of scenes.

1 ChooseSmartShufe.

 Press the <m> button, and then choose

[

] in the menu (=

27).

 Four candidate images are displayed.

2 Chooseanimage.

 Press the <o><q><r> buttons to

choose the image you want to view next.

 Your chosen image is displayed in the

center, surrounded by the next four

candidate images.

 For full-screen display of the center image,

press the <

> button. To restore the original

display, press the <

> button again.

 Press the <n> button to restore

single-image display.

• Only still images shot with this camera are played back using Smart Shufe.

• Smart Shufe is not available in the following cases:

- There are less than 50 shots taken with this camera

- An unsupported image is currently displayed

- Images are shown in ltered display (=

69)

Still Images Movies

Protecting Images

Protect important images to prevent accidental erasure by the camera

74).

 Press the <m> button, and then choose

[:] in the menu (=

27). [Protected]

is displayed.

 To cancel protection, repeat this process

and choose [:] again, and then press

the <m> button.

• Protected images on a memory card will be erased if you format the

card (=

109, 110).

• Protected images cannot be erased using the camera’s erasure function. To

erase them this way, rst cancel protection.

Using the Menu

1 Accessthesettingscreen.

 Press the <n> button and choose

[Protect] on the [1] tab (=

28).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

2 Chooseaselectionmethod.

 Choose a menu item and a setting as

desired (=

28).

 To return to the menu screen, press the

<n> button.

Choosing Images Individually

1 Choose[Select].

 Following step 2 in “Using the Menu”

73), choose [Select] and press the

<m> button.

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

[

] is displayed.

 To cancel selection, press the <m>

button again. [

] is no longer displayed.

 Repeat this process to specify other

images.

3 Protecttheimage.

 Press the <n> button. A

conrmation message is displayed.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

• Images will not be protected if you switch to Shooting mode or turn

the camera off before nishing the setup process in step 3.

Selecting a Range

1 Choose[SelectRange].

 Following step 2 in “Using the Menu”

73), choose [Select Range] and

press the <m> button.

2 Chooseastartingimage.

 Press the <m> button.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

3 Chooseanendingimage.

 Press the <r> button to choose [Last

image], and then press the <m> button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

 Images before the rst image cannot be

selected as the last image.

4 Protecttheimages.

 Press the button to choose

[Protect], and then press the <m>

button.

Specifying All Images at Once

1 Choose[SelectAllImages].

 Following step 2 in “Using the Menu”

73), choose [Select All Images] and

press the <m> button.

2 Protecttheimages.

 Press the <o> buttons to choose

[Protect], and then press the <m>

button.

• To cancel protection for groups of images, choose [Unlock] in step 4 of

“Selecting a Range” or in step 2 of “Specifying All Images at Once”.

Still Images Movies

Erasing Images

You can choose and erase unneeded images one by one. Be careful when

erasing images, because they cannot be recovered. However, protected

images (=

72) cannot be erased.

1 Chooseanimagetoerase.

 Press the <q><r> buttons to choose an

image.

2 Erasetheimage.

 Press the <m> button, and then choose

[a] in the menu (=

27).

 After [Erase?] is displayed, press the

<q><r> buttons to choose [Erase], and

then press the <m> button.

 The current image is now erased.

 To cancel erasure, press the <q><r>

buttons to choose [Cancel], and then

press the <m> button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

Erasing All Images

You can erase all images at once. Be careful when erasing images,

because they cannot be recovered. However, protected images (=

72)

cannot be erased.

ChoosingaSelectionMethod

1 Accessthesettingscreen.

 Press the <n> button, and then

choose [Erase] on the [1] tab (=

28).

2 Chooseaselectionmethod.

 Choose a menu item and a setting as

desired (=

28).

 Press the <o> buttons to choose

a selection method, and then press the

<m> button.

 To return to the menu screen, press the

<n> button.

ChoosingImagesIndividually

1 Choose[Select].

 Following step 2 in “Choosing a Selection

Method” (=

75), choose [Select] and

press the <m> button.

2 Chooseanimage.

 Once you choose an image following

step 2 in “Choosing Images Individually”

73), [ ] is displayed.

 To cancel selection, press the <m>

button again. [

] is no longer displayed.

 Repeat this process to specify other

images.

3 Erasetheimage.

 Press the <n> button. A

conrmation message is displayed.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

SelectingaRange

1 Choose[SelectRange].

 Following step 2 in “Choosing a Selection

Method” (=

75), choose

[Select Range] and press the <m>

button.

2 Chooseimages.

 Follow steps 2 – 3 in “Selecting a Range”

73) to specify images.

3 Erasetheimages.

 Press the button to choose [Erase],

and then press the <m> button.

SpecifyingAllImagesatOnce

1 Choose[SelectAllImages].

 Following step 2 in “Choosing a Selection

Method” (=

75), choose

[Select All Images] and press the <m>

button.

2 Erasetheimages.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

Still Images Movies

Rotating Images

Change the orientation of images and save them as follows.

1 Choose[\].

 Press the <m> button, and then choose

[\] in the menu (=

27).

2 Rotatetheimage.

 Press the <q> or <r> button, depending

on the desired direction. Each time you

press the button, the image is rotated

90°. Press the <m> button to complete

the setting.

Using the Menu

1 Choose[Rotate].

 Press the <n> button and choose

[Rotate] on the [1] tab (=

28).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

2 Rotatetheimage.

 Press the <q><r> buttons to choose an

image.

 The image is rotated 90° each time you

press the <m> button.

 To return to the menu screen, press the

<n> button.

• Movies with an image quality of [ ] cannot be rotated.

• Rotation is not possible when [Auto Rotate] is set to [Off] (=

77).

Deactivating Auto Rotation

Follow these steps to deactivate automatic rotation by the camera, which

rotates images shot in vertical orientation so they are displayed vertically on

the camera.

 Press the <n> button, choose [Auto

Rotate] on the [1] tab, and then choose

[Off] (=

28).

• Images cannot be rotated (=

76) when you set [Auto Rotate] to

[Off]. Additionally, images already rotated will be displayed in the

original orientation.

• In Smart Shufe (=

72) mode, even if [Auto Rotate] is set to

[Off], images shot vertically will be displayed vertically, and rotated

images will be displayed in the rotated orientation.

Image Categories

You can organize images by tagging them as favorites. By choosing a

category in ltered playback, you can restrict the following operations to all

of those images.

• Viewing (=

67), Viewing Slideshows (=

71), Protecting Images

72), Erasing Images (=

74), Adding Images to the Print List

(DPOF) (=

121), Adding Images to a Photobook (=

123)

Still Images Movies

Tagging Images as Favorites

 Press the <m> button, and then choose

[

] in the menu (=

27).

 [Tagged as Favorite] is displayed.

 To untag the image, repeat this process

and choose [

] again, and then press

the <m> button.

UsingtheMenu

1 Choose[Favorites].

 Press the <n> button and choose

[Favorites] on the [1] tab (=

28).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

[

] is displayed.

 To untag the image, press the <m>

button again. [

] is no longer displayed.

 Repeat this process to choose additional

images.

3 Finishthesetupprocess.

 Press the <n> button. A

conrmation message is displayed.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

• Images will not be tagged as favorites if you switch to Shooting

mode or turn the camera off before nishing the setup process in

step 3.

• Favorite images will have a three-star rating ( ) when transferred

to computers running Windows 8, Windows 7, or Windows Vista. (Does not

apply to movies.)

Editing Still Images

• Image editing (=

78 – 81) is only available when the memory

card has sufcient free space.

Still Images

Resizing Images

Save a copy of images at a lower resolution.

1 Choose[Resize].

 Press the <n> button and choose

[Resize] on the [1] tab (=

28).

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

3 Chooseanimagesize.

 Press the <q><r> buttons to choose the

size, and then press the <m> button.

 [Save new image?] is displayed.

4 Savethenewimage.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

 The image is now saved as a new le.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

5 Reviewthenewimage.

 Press the <n> button. [Display new

image?] is displayed.

 Press the <q><r> buttons to choose

[Yes], and then press the <m> button.

 The saved image is now displayed.

• Editing is not possible for images saved as [ ] in step 3.

• Images cannot be resized to a higher resolution.

Still Images

Cropping

You can specify a portion of an image to save as a separate image le.

1 Choose[Cropping].

 Press the <n> button, and then

choose [Cropping] on the [1] tab

28).

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

3 Adjustthecroppingarea.

 A frame is displayed around the portion of

the image to be cropped.

 The original image is shown in the upper

left, and a preview of the image as

cropped is shown in the lower right.

 To resize the frame, move the zoom

lever.

 To move the frame, press the

<o><q><r> buttons.

 To change the frame orientation, press

the <m> button.

 Press the <n> button.

4 Saveasanewimageand

review.

 Follow steps 4 – 5 in “Resizing Images”

78).

• Editing is not possible for images shot at a resolution of [ ]

39) or resized to [ ] (=

78).

• Images supported for cropping will have the same aspect ratio after cropping.

• Cropped images will have a smaller resolution than uncropped images.

Resolution After Cropping

Preview of Image After Cropping

Cropping Area

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

Still Images

Changing Image Color Tones (My Colors)

You can adjust image colors and then save the edited image as a separate

le. For details on each option, see “Changing Image Color Tones (My

Colors)” (=

58).

1 Choose[MyColors].

 Press the <n> button, and then

choose [My Colors] on the [1] tab

28).

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

3 Chooseanoption.

 Press the <q><r> buttons to choose an

option, and then press the <m> button.

4 Saveasanewimageand

review.

 Follow steps 4 – 5 in “Resizing Images”

78).

• Image quality of pictures you repeatedly edit this way will be a little

lower each time, and you may not be able to obtain the desired

color.

• The color of images edited using this function may vary slightly from the color

of images shot using My Colors (=

58).

Still Images

Correcting Image Brightness (i-Contrast)

Excessively dark image areas (such as faces or backgrounds) can be

detected and automatically adjusted to the optimal brightness. Insufcient

overall image contrast is also automatically corrected, to make subjects

stand out better. Choose from four correction levels, and then save the

image as a separate le.

1 Choose[i-Contrast].

 Press the <n> button, and then

choose [i-Contrast] on the [1] tab

28).

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

3 Chooseanoption.

 Press the <q><r> buttons to choose an

option, and then press the <m> button.

4 Saveasanewimageand

review.

 Follow steps 4 – 5 in “Resizing Images”

78).

• For some images, correction may be inaccurate or may cause

images to appear grainy.

• Images may look grainy after repeated editing using this function.

• If [Auto] does not produce the expected results, try correcting images using

[Low], [Medium], or [High].

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

Still Images

Correcting Red-Eye

Automatically corrects images affected by red-eye. You can save the

corrected image as a separate le.

1 Choose[Red-EyeCorrection].

 Press the <n> button, and then

choose [Red-Eye Correction] on the [1]

tab (=

28).

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image.

3 Correcttheimage.

 Press the <m> button.

 Red-eye detected by the camera is now

corrected, and frames are displayed

around corrected image areas.

 Enlarge or reduce images as needed.

Follow the steps in =

70.

4

Saveasanewimageandreview.

 Press the <o><q><r> buttons to

choose [New File], and then press the

<m> button.

 The image is now saved as a new le.

 Follow step 5 in “Resizing Images”

79).

• Some images may not be corrected accurately.

• To overwrite the original image with the corrected image, choose

[Overwrite] in step 4. In this case, the original image will be erased.

• Protected images cannot be overwritten.

Movies

Editing Movies

You can cut movies to remove unneeded portions at the beginning or end.

1 Choose[*].

 Following steps 1 – 5 in “Viewing”

67), choose [*] and press the

<m> button.

 The movie editing panel and editing bar

are now displayed.

2 Specifyportionstocut.

 Press the <o> buttons to choose

[

] or [ ].

 To view the portions you can cut

(identied by [

] on the screen), press

the <q><r> buttons to move [

]. Cut

the beginning of the movie (from [

])

by choosing [

], and cut the end of the

movie by choosing [

 Even if you move [ ] to a position other

than a [

] mark, choosing [ ] will only

cut the portion from the nearest [

] to

the left, and choosing [

] will cut the

portion from the nearest [

] to the right.

3 Reviewtheeditedmovie.

 Press the <o> buttons to choose

[

], and then press the <m> button.

The edited movie is now played.

 To edit the movie again, repeat step 2.

Movie Editing Panel

Movie Editing Bar

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

PlaybackMode

 To cancel editing, press the <o>

buttons to choose [

]. Press the <m>

button, press the <q><r> buttons to

choose [OK], and then press the <m>

button again.

4 Savetheeditedmovie.

 Press the <o> buttons to choose

[

], and then press the <m> button.

 Press the <o><q><r> buttons to

choose [New File], and then press the

<m> button.

 The movie is now saved as a new le.

• To overwrite the original movie with the cut one, choose [Overwrite]

in step 4. In this case, the original movie will be erased.

• [Overwrite] is only available when memory cards lack sufcient free

space.

• Movies may not be saved if the battery runs out while saving is in

progress.

• When editing movies, you should use a fully charged battery or an

AC adapter kit (=

114, sold separately).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Wi-Fi Functions

Use Wi-Fi functions to send images from the camera to

a variety of compatible devices, and use the camera with

Web services

WhatYouCanDoWithWi-Fi...84

UsingWi-FitoSendImages

FromtheCamera....................85

Wi-Fi(WirelessLAN)

Precautions.............................85

SecurityPrecautions...............86

Glossary....................................87

RegisteringaCameraNickname

(Firsttimeonly).......................88

ConnectingtoWebServices...89

ConnectingtoaSmartphone. . 91

ConnectingtoAnotherCamera

...93

ConnectingtoaComputer......94

ConnectingtoaPrinter...........99

SendingImages......................101

SendingImagestoaComputer

viaCANONiMAGE

GATEWAY..............................103

GeotaggingImagesonthe

Camera...................................103

EditingorErasing

Wi-FiSettings........................104

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

What You Can Do With Wi-Fi

This camera is an approved Wi-Fi

* product. You can wirelessly connect to

and send images to the following devices.

Note that, in this chapter, wireless LAN functions other than Wi-Fi may be

referred to as Wi-Fi.

* Wi-Fi is a brand name that indicates interoperability certication of Wi-Fi

devices.

ConnectingtoWebServices

CANON iMAGE GATEWAY is an online photo service available

to those who have purchased this product. If you register for

free as a member, you can use CANON iMAGE GATEWAY

to access various Web services, such as social networking

services set on a computer.

Images on the camera can also be sent automatically to a

computer via CANON iMAGE GATEWAY.

ConnectingtoaSmartphone

Send images to smartphones and tablet computers that

have Wi-Fi functions. You can also geotag your shots from a

connected smartphone or tablet. Installation of a dedicated

application on the smartphone or tablet is required. See the

Canon website for details.

For convenience in this manual, smartphones, tablets, and

other compatible devices are collectively referred to as

“smartphones”.

ConnectingtoAnotherCamera

Use the Wi-Fi function to send images between Canon-brand,

compact digital cameras.

ConnectingtoaComputer

Use the included software to wirelessly send images from the

camera to a computer. Refer to the Software Guide for details.

ConnectingtoaPrinter

Send images wirelessly to a PictBridge-compatible printer

(supporting DPS over IP) to print them.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Using Wi-Fi to Send Images From the

Camera

Device

Operation

Registering a camera

nickname (=

88)

○ ○ ○ ○ ○

Installing the included

software (=

18)*

○ – – ○ –

Adjusting settings for

using Web services

from CANON iMAGE

GATEWAY (=

89)

○ – – – –

Installing the dedicated

application on the

smartphone (=

91)

– ○ – – –

Establishing a connection

with the camera

○

89)

○

91)

○

93)

○

94)

○

99)

Sending images

101)

○*

○ ○ – –

Transferring images to a

computer (=

98)

– – – ○ –

Printing images

99)*

– – – – ○

*1 Instructions in this guide apply when the software has been installed correctly from

the included CD-ROM (=

18).

*2 Images are sent automatically when transferred via a server (=

103).

*3 For detailed printing instructions, see “Printing Images” (=

117).

Preparations

Connection

Send/Print/

Import

Wi-Fi (Wireless LAN) Precautions

• The model number is

ELPH 130 IS

IXUS 140

PC1889 /

ELPH 120 IS

IXUS 135

PC1896 (including

WLAN module model WM218). To identify

your model, check the label on the bottom of

the camera for a number beginning with PC.

• Countries and Regions Permitting WLAN

Use

- Use of WLAN is restricted in some countries and regions, and illegal

use may be punishable under national or local regulations. To avoid

violating WLAN regulations, visit the Canon website to check where use

is allowed.

Note that Canon cannot be held liable for any problems arising from

WLAN use in other countries and regions.

• Doing any of the following may incur legal penalties:

- Altering or modifying the product

- Removing the certication labels from the product

• According to foreign exchange and foreign trade law regulations, export

permission (or service transaction permission) from the Japanese

government is necessary to export strategic resources or services

(including this product) outside Japan.

• Because this product includes American encryption software, it falls

under U.S. Export Administration Regulations, and cannot be exported to

or brought into a country under U.S. trade embargo.

• Be sure to make notes of the wireless LAN settings you use.

The wireless LAN settings saved to this product may be erased due to

incorrect operation of the product, the effects of radio waves or static

electricity, accident or malfunction. Be sure to make notes of wireless

LAN settings as a precaution. Please note that Canon accepts no

responsibility for degradation of content, direct or indirect damages or

loss of revenue arising from use of the product.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

• When transferring this product to another person, disposing of it, or

sending it for repair, be sure to note the wireless LAN settings and reset

the product to its default settings (erase settings) if necessary.

• Canon will not make compensation for loss or theft of the product.

Canon accepts no responsibility for damages incurred due to

unauthorized access to registered data (image transfer destinations, etc.)

if the product is lost or stolen.

• Be sure to use the product as directed in this guide.

Be sure to use the wireless LAN function of this product within the

guidelines noted in this guide. Canon accepts no responsibility for

damages or loss if the function and product are used in ways other than

as described in this guide.

• Do not use the wireless LAN function of this product near medical

equipment or other electronic equipment.

Use of the wireless LAN function near medical equipment or other

electronic equipment may affect operation of those devices.

Radio Wave Interference Precautions

• This product may receive interference from other devices that emit radio

waves. To avoid interference, be sure to use this product as far away as

possible from such devices, or avoid using the devices at the same time

as this product.

Security Precautions

Because Wi-Fi uses radio waves to transmit signals, security precautions

more stringent than when using a LAN cable are required.

Keep the following points in mind when using Wi-Fi.

• Only use networks you are authorized to use.

This product searches for Wi-Fi networks in the vicinity and displays the

results on the screen. Networks you are not authorized to use (unknown

networks) may also be displayed. However, attempting to connect to or

using such networks could be regarded as unauthorized access. Be sure

to use only networks you are authorized to use, and do not attempt to

connect to other unknown networks.

If security settings have not been properly set, the following problems may

occur.

• Transmission monitoring

Third parties with malicious intent may monitor Wi-Fi transmissions and

attempt to acquire the data you are sending.

• Unauthorized network access

Third parties with malicious intent may gain unauthorized access to

the network you are using to steal, modify, or destroy information.

Additionally, you could fall victim to other types of unauthorized access

such as impersonation (where someone assumes an identity to gain

access to unauthorized information) or springboard attacks (where

someone gains unauthorized access to your network as a springboard to

cover their tracks when inltrating other systems).

To prevent these types of problems from occurring, be sure to thoroughly

secure your Wi-Fi network.

Only use this camera’s Wi-Fi function with a proper understanding of

Wi-Fi security, and balance risk and convenience when adjusting security

settings.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Glossary

Wi-Fi related terms are explained here. Also refer to the explanations of

terms given in the respective sections of this guide.

• Access point

A device that relays radio wave signals to create a Wi-Fi network. This

term also refers to a network that you can use to connect to the Internet

via Wi-Fi.

• Firewall

This is a system that protects networks from computer viruses, external

unauthorized access, and security threats. This is set on the Wi-Fi router

or computer.

• SSID/ESSID

Precongured numbers and letters used to identify a specic access

point. Also called the “access point name” or “network name”.

• Encryption key

This is a key used to encrypt data for transmission to and from an access

point.

• IP address

This is an address used to identify a device within a network.

• MAC address

This is a unique address pre-assigned to a network device. It is also

referred to as a “physical address”.

The camera can print to PictBridge-compatible printers

via Wi-Fi. PictBridge technical standards make it easy

to connect digital cameras, printers, and other devices

directly. Additionally, a new standard called DPS over IP

enables PictBridge connections in network environments,

and the camera is also compatible with this standard.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Registering a Camera Nickname

(First time only)

To start with, register a camera nickname.

This nickname will be displayed on the screen of target devices when

connecting to other devices via Wi-Fi.

1 AccesstheWi-Fimenu.

 Press the

> button to turn the camera on.

 Press the <o> button.

2 Accessthekeyboard.

 Press the <m> button.

3 Enteranickname.

 Press the <o><q><r> buttons to

choose a character, and then press the

<m> button to enter it.

 Up to 16 characters can be used.

 Choose [ ] or [ ] and press the <m>

button to move the cursor.

 Choose [ ] and press the <m> button.

The previous character will be deleted.

4 Savethesettings.

 Press the <n> button, press the

<o> buttons to choose [OK], and

then press the <m> button.

• When connecting wirelessly to any device other than a computer, a memory

card must be inserted in the camera. Additionally, the memory card must

contain images in order for you to access Web services or connect to a

smartphone or printer wirelessly.

• To change the camera’s nickname, choose [Wi-Fi Settings] on the [3] tab, and

then choose [Change Device Nickname].

• If the Wi-Fi menu is not displayed but only the display information changes

when you press the <o> button, rst press the button to switch from

detailed information display (=

68).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Connecting to Web Services

Set up the camera to use a variety of Web services as follows.

Adjusting Settings for Using Web Services

From CANON iMAGE GATEWAY

Adjust account settings for the Web services you want to use.

• A computer is required for Web service settings, starting with CANON

iMAGE GATEWAY.

• Because CameraWindow is used to adjust settings, be sure to install it

from the included CD-ROM beforehand (=

19).

• For information on countries and regions where CANON iMAGE

GATEWAY is available, visit the Canon website (http://canon.com/cig).

1 RegisterasaCANONiMAGE

GATEWAYmember.

 From a computer or other device

connected to the Internet, access http://

canon.com/cig and visit the CANON

iMAGE GATEWAY site for your region.

 Follow the instructions displayed to

complete member registration (free of

charge).

 You must have an account with Web

services other than CANON iMAGE

GATEWAY if you desire to use them. For

further details, check the websites for

each Web service you want to register.

2 Connectthecameratoa

computerwiththeinterface

cable(=



20).

 On a computer running Windows, there

is no need to connect the interface cable

if you complete settings in advance

95). In this case, you can connect

via Wi-Fi.

3 DisplayCameraWindow



21).

4 AccesstheCANONiMAGE

GATEWAYloginscreen.

 Click [Camera Settings], and then click

[Set Up Web Services].

5 LogintoCANONiMAGE

GATEWAY.

 Enter your CANON iMAGE GATEWAY

[Login].

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

6

SetaWebserviceyouwanttouse.

 Follow the on-screen instructions to complete

settings for Web services you want to use.

 Once the Web service settings are

complete, click [Finish] at the bottom of

the window to close it.

7 ApplyWebservicesettingsto

thecamera.

 Choose the name of the Web service you

want to set on the camera, and click [

]

in the middle of the lists.

 The name of the Web service that will be

saved to the camera will be displayed in

the [Camera] list.

 Click [o] or [p] to change the order of

the Web services that will be displayed in

the camera’s Wi-Fi menu.

 After you nish adjusting settings in the

[Camera] list to your liking, close the window.

 The settings of Web services and for

transferring images via the server are

applied to the camera.

• An Internet connection is required to access CANON iMAGE

GATEWAY (an Internet browser must be installed on the computer,

you must have an account with an Internet service provider, and an

Internet connection must be established).

• When connecting to CANON iMAGE GATEWAY, check the CANON

iMAGE GATEWAY website for browser (Microsoft Internet Explorer,

etc.) settings, conditions, and version information.

• Separate ISP connection and access point fees may be applicable.

• After logging in to CANON iMAGE GATEWAY the second time in step 5, the

screen in step 7 will be displayed. To change settings for Web services you

use, click [Edit Web Services].

• To add or change Web services, repeat the above procedures starting from

step 2.

Connecting to Web Services

Connect to Web services registered to the camera.

1 AccesstheWi-Fimenu.

 Press the <o> button.

2 ChooseaWebservice.

 Press the <o><q><r> buttons to

choose the icon of the Web service that

you want to connect to, and then press

the <m> button.

 If the Web service has multiple recipients,

select the desired recipient on the [Select

Recipient] screen, and press the <m>

button.

3 Connecttoanaccesspoint.

 With a WPS-compatible access point,

connect to the access point by following

steps 4 – 6 in “Adding a Computer”

96).

 With an access point that is not WPS-

compatible, connect to the access point

by following steps 2 – 3 in “Connecting to

Access Points in the List” (=

98).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

 When you have connected to the Web

service, the image transfer screen will be

displayed. Proceed to “Sending Images”

101). However, when [Send via

Server] is selected, images will be sent

as soon as a connection is established

103).

• When you are in the vicinity of an access point that you have

previously connected to, the camera will automatically connect

to it in step 2. To change access points, select [Switch Network]

from the screen that will be displayed when the connection is

being established, and follow steps 4 – 5 in “Adding a Computer”

96).

• After you have accessed the Wi-Fi menu once, you can access it again by

pressing the <o> button. The recent target device is listed rst, so you can

easily connect again by pressing the <o> buttons to choose it. To add

a new device, display the device selection screen by pressing the <q><r>

buttons, and then congure the setting.

If you prefer not to display recent target devices, press the <n> button,

and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

Connecting to a Smartphone

When establishing a Wi-Fi connection with a smartphone, you can either

use the camera as an access point (Camera Access Point mode) or use

another access point.

Follow these instructions when using the camera as an access point. When

using another access point, see Connecting to Access Points in the List

98).

Installing CameraWindow on a Smartphone

Before connecting your camera to a smartphone, rst install the free

dedicated application, CameraWindow, on your smartphone.

1 Connectthesmartphonetoa

network.

2 InstallCameraWindow.

 For an iPhone, iPad, or iPod touch,

download and install CameraWindow

from the Mac App Store.

 For an Android device, download and

install CameraWindow from Google Play.

3 Registerthesmartphonename.

 On the smartphone, start CameraWindow

and enter a name for the smartphone that

will be displayed on the camera.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

• For details on this application (supported smartphones and included functions),

refer to the Canon website.

Establishing the Smartphone Connection

1 AccesstheWi-Fimenu.

 Press the <o> button.

2 Chooseasmartphone.

 Press the <o><q><r> buttons

to choose [

], and then press the <m>

button.

3 Choose[AddaDevice].

 Press the <o> buttons to choose

[Add a Device], and then press the <m>

button.

 The camera’s SSID and encryption key

are displayed on the screen.

4 Usethesmartphonetoconnect

tothenetworkdisplayedonthe

camerascreen.

 Choose the displayed SSID (network

name) from the smartphone’s Wi-Fi

setting menu.

 Enter the encryption key displayed on the

camera screen into the password eld on

the smartphone.

5 StartCameraWindowonthe

smartphone.

 Once the smartphone is recognized on

the camera, the device connection screen

will be displayed on the camera.

6 Chooseasmartphoneto

connectto.

 Press the <o> buttons to choose

the smartphone for the connection

(= 91), and then press the <m>

button.

7 Adjusttheprivacysettings.

 Press the <q><r> buttons to choose

[Yes], and then press the <m> button.

 You can now use the smartphone to

receive images sent from the camera,

or to geotag images on the camera

103).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

 When the smartphone has been added

successfully, the image transfer screen

will be displayed. Proceed to “Sending

Images” (=

101).

• When you are in the vicinity of an access point that you have

previously connected to, the camera will automatically connect to

it in step 3. To change access points, select [Switch Network] from

the screen that will be displayed when the connection is being

established, and follow steps 4 – 5 in “Adding a Computer”

96).

• All camera images can be viewed from the connected smartphone

when you choose [Yes] in step 7. To keep camera images private, so

that they cannot be viewed from the smartphone, choose [No] in step 7.

• You can connect to smartphones that you have already connected to by

choosing them on the [Select a Device] screen in step 3.

• After you have accessed the Wi-Fi menu once, you can access it again by

pressing the <o> button. The recent target device is listed rst, so you can

easily connect again by pressing the <o> buttons to choose it. To add

a new device, display the device selection screen by pressing the <q><r>

buttons, and then congure the setting.

If you prefer not to display recent target devices, press the <n> button,

and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

• The image quality level for movies that can be sent may differ depending

on the smartphone. Refer to the instruction manual provided with your

smartphone for details.

• To add multiple smartphones, repeat the above procedures starting from step 1.

• To change privacy settings for smartphones added to the list, choose the

smartphone whose settings you want to change from [Edit a Device] in step 3,

and then choose [View Settings].

Connecting to Another Camera

Connect two cameras via Wi-Fi and send images between them as follows.

• Only Canon-brand cameras equipped with a Wi-Fi function can be connected to

wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected

to if they do not have a Wi-Fi function. You cannot connect to PowerShot SD430

DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this camera.

1 AccesstheWi-Fimenu.

 Press the <o> button.

2 Chooseacamera.

 Press the <o><q><r> buttons to

choose [4], and then press the <m>

button.

3 Choose[AddaDevice].

 Press the <o> buttons to choose

[Add a Device], and then press the <m>

button.

 Follow steps 1 – 3 on the target camera.

 Camera connection information will be added

when [Start connection on target camera] is

displayed on both camera screens.

 When the target camera has been added

successfully, the image transfer screen

will be displayed. Proceed to “Sending

Images” (=

101).

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

• After you have accessed the Wi-Fi menu once, you can access it again by

pressing the <o> button. The recent target device is listed rst, so you can

easily connect again by pressing the <o> buttons to choose it. To add

a new device, display the device selection screen by pressing the <q><r>

buttons, and then congure the setting.

If you prefer not to display recent target devices, press the <n> button,

and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

• To add multiple cameras, repeat the above procedures starting from step 1.

• Once a camera is added, the camera nickname will be displayed on the screen

in step 3. To connect to a camera again, simply choose the camera nickname

from the list.

Connecting to a Computer

Congure computer settings for the connection, add the computer as a

connection destination, and transfer images to the computer wirelessly

using the included software CameraWindow as follows.

• When connected to a computer, the camera is used to establish the

connection and then the computer (included software CameraWindow) is used

to transfer images.

Preparing to Register a Computer

Prepare to register a computer.

CheckingYourComputerEnvironment

For computer environments that allow Wi-Fi connection with a camera, refer

to “System Requirements” (=

19).

Additionally, the included software CameraWindow must be installed

19).

• Windows 7 Starter and Home Basic editions are not supported.

• Windows 7 N (European version) and KN (South Korean version)

require a separate download and installation of Windows Media

Feature Pack.

For further details, see the following website.

http://go.microsoft.com/fwlink/?LinkId=159730

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

CheckingYourWi-FiEnvironment

To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access

point must be connected to a computer. Be sure to use a Wi-Fi base unit

that conforms to the Wi-Fi standard listed in Specications (=

140).

If you are already using Wi-Fi, conrm the following items and mark each

one on the Check sheet. For instructions on checking network settings,

refer to the access point user guide.

• If system administrator status is needed to adjust network settings,

contact the system administrator for details.

• These settings are very important for network security. Exercise

adequate caution when changing these settings.

Check sheet

Networkname(SSID/ESSID)

The SSID or ESSID for the access point you use.

Networkcerticate/dataencryption(encryptionmethod/

encryptionmode)

The method for encrypting data during transmission via

Wi-Fi.

○

None

○

WEP (open system

authentication)

○

WPA-PSK (TKIP)

○

WPA-PSK (AES)

○

WPA2-PSK (TKIP)

○

WPA2-PSK (AES)

Encryptionkey(networkkey)

The data encryption key used for transmission via Wi-Fi.

Keyindex(sentkey)

The key specied when using WEP for Network certicate/

data encryption.

○

• A router is a device that creates a network (LAN) structure for connecting

multiple computers. A router that contains an internal Wi-Fi function is called a

“Wi-Fi router”.

• This guide refers to all Wi-Fi routers and base stations as “access points”.

• If you use MAC address ltering on your Wi-Fi network, be sure to add the

camera’s MAC address to your access point. You can check your camera’s

MAC address by choosing the [3] tab, [Wi-Fi Settings], and then [Check MAC

Address].

ComputerSettingsforConnectingviaWi-Fi

(Windowsonly)

On a computer running Windows, you must congure the following settings

before you can connect the camera to the computer wirelessly.

1 Conrmthecomputeris

connectedtoWi-Fi.

 For instructions on checking your network

connection, refer to the computer user

manual.

2 Congurethesetting.

 Click in the following order: [Start] menu

►

[All Programs]

►

[Canon Utilities]

►

[CameraWindow]

►

[Wi-Fi connection

setup].

 In the application that opens, follow the

on-screen instructions and congure the

setting.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

• The following Windows settings are congured when you run the utility in step 2.

- Turn on media streaming.

This will enable the camera to nd the computer to access via Wi-Fi.

- Turn on network discovery.

This will enable the computer to nd the camera.

- Turn on ICMP (Internet Control Message Protocol).

This allows you to check the network connection status.

- Enable Universal Plug & Play (UPnP).

This will enable network devices to detect each other automatically.

• Some security software may prevent you from completing the settings as

described here. Check the settings of your security software.

Adding a Computer

Add a computer to your list of devices to connect to via Wi-Fi.

Follow these instructions when using a Wi-Fi Protected Setup (WPS)

compatible access point to establish a push-button connection.

If your access point is not WPS-compatible, establish a connection as

described in “Connecting to Access Points in the List” (=

98).

• WPS makes it easy to complete settings when connecting devices over Wi-Fi.

You can use either Push Button Conguration Method or PIN Method for

settings on a WPS supported device.

• Refer to the user guide provided with your access point to check if it supports

WPS.

• Be sure to also read the user guide included with your access point.

1 AccesstheWi-Fimenu.

 Press the <o> button.

2 Chooseacomputer.

 Press the <o><q><r> buttons to

choose [

], and then press the <m>

button.

3 Choose[AddaDevice].

 Press the <o> buttons to choose

[Add a Device], and then press the <m>

button.

 A list of detected access points will be

displayed in the [Select Network] screen.

4 Choose[WPSConnection].

 Press the <o> buttons to choose

[WPS Connection], and then press the

<m> button.

5 Choose[PBCMethod].

 Press the <o> buttons to choose

[PBC Method], and then press the <m>

button.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

6 Establishtheconnection.

 On the access point, hold down the WPS

connection button for a few seconds.

 On the camera, press the <m> button.

 The camera will connect to the access

point.

 A list of computers connected to the

access point will appear in the [Select a

Device] screen.

7

Chooseacomputertoconnectto.

 Press the <o> buttons to choose

the computer name, and then press the

<m> button.

 When using a Macintosh computer,

see Using CameraWindow to Transfer

Images to a Computer (=

98).

8 Installadriver(rstWindows

connectiononly).

 When the screen at left is displayed, click

the Start menu on the computer, click

[Control Panel], and then click [Add a

device].

 Double click the connected camera icon.

 Driver installation will begin.

 After driver installation is complete, and

the camera and computer connection

is enabled, the AutoPlay screen will be

displayed. Nothing will be displayed on

the camera screen.

 Proceed to Using CameraWindow

to Transfer Images to a Computer

98).

• When you are in the vicinity of an access point that you have

previously connected to, the camera will automatically connect

to it in step 3. To change access points, select [Switch Network]

from the screen that will be displayed when the connection is

being established, and follow steps 4 – 5 in “Adding a Computer”

96).

• You can connect to computers that you have already connected to by choosing

them on the [Select a Device] screen in step 3.

• If you chose [PIN Method] in step 5, a PIN code will be displayed on the

screen. Be sure to set this code in the access point. Choose a device in the

[Select a Device] screen. For further details, refer to the user guide included

with your access point.

• To add multiple computers, repeat the above procedures starting from step 1.

• To disconnect from the camera, turn off the camera.

• After you have accessed the Wi-Fi menu once, you can access it again by

pressing the <o> button. The recent target device is listed rst, so you can

easily connect again by pressing the <o> buttons to choose it. To add

a new device, display the device selection screen by pressing the <q><r>

buttons, and then congure the setting.

If you prefer not to display recent target devices, press the <n> button,

and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Connecting to Access Points in the List

1 Viewthelistedaccesspoints.

 View the listed networks (access points)

as described in steps 1 – 3 of “Adding a

Computer” (=

96).

2 Chooseanaccesspoint.

 Press the <o> buttons to choose a

network (access point), and then press

the <m> button.

3 Entertheaccesspoint’s

encryptionkey.

 Press the <m> button to access the

keyboard, and then enter the encryption

key (=

88).

 Press the <o> buttons to choose

[Next], and then press the <m> button.

4 Choose[Auto].

 Press the <o> buttons to choose

[Auto], and then press the <m> button.

 A list of other devices connected to the

access point will appear in the [Select a

Device] screen.

5

Chooseacomputertoconnectto.

 Choose the computer to connect to,

following steps 7 – 8 in “Adding a

Computer” (=

97). The computer is

now added to the list.

• For information on the access point’s encryption key, refer to the body of the

access point or its user manual.

• Up to 16 access points will be displayed. If no access points are detected,

choose [Manual Settings] in step 2 to manually set an access point. Follow on-

screen instructions and enter an SSID, security settings, and an encryption key.

• When you use an access point that you have already connected to for

connecting to another device, [*] is displayed for the encryption key in step 3.

To use the same encryption key, press the <o> buttons to choose [Next],

and then press the <m> button.

• To add multiple computers, repeat the above procedures starting from step 1.

Using CameraWindow to Transfer Images to a

Computer

Use the computer (included software CameraWindow) to transfer images

from the camera to the computer.

• For details on how to use CameraWindow, see the Software Guide (=

18).

1 DisplayCameraWindow.

 In Windows, click [Downloads Images

From Canon Camera using Canon

CameraWindow].

 CameraWindow will be displayed.

COPY

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

 On a Macintosh computer,

CameraWindow is automatically

displayed when a Wi-Fi connection is

established between the camera and

computer.

2 Importimages.

 Click [Import Images from Camera], and

then click [Import Untransferred Images].

 Images are now saved to the Pictures

folder on the computer, in separate

folders named by date.

 Click [OK] in the screen that is displayed

after image import is complete.

• If CameraWindow is not displayed when using a Macintosh computer, click the

[CameraWindow] icon in the Dock.

• Movies will take longer to import since the le size is larger than still images.

• To disconnect from the camera, turn off the camera.

• You can also specify to save all images or only selected images to the

computer, and you can change the destination folder. Refer to the Software

Guide (=

18) for details.

Connecting to a Printer

Connect the camera to a printer via Wi-Fi to print as follows.

When establishing a Wi-Fi connection with a printer, you can either use the

camera as an access point (Camera Access Point mode) or use another

access point.

Follow these instructions when using the camera as an access point. When

using another access point, see Connecting to Access Points in the List

98) in “Adding a Computer”.

1 AccesstheWi-Fimenu.

 Press the <o> button.

2 Chooseaprinter.

 Press the <o><q><r> buttons to

choose [2], and then press the <m>

button.

3 Choose[AddaDevice].

 Press the <o> buttons to choose

[Add a Device], and then press the <m>

button.

COPY

100

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

4 Usetheprintertoconnectto

thenetworkdisplayedonthe

camerascreen.

 Choose the displayed SSID (network

name) from the printer’s Wi-Fi setting

menu.

 Enter the encryption key displayed on the

camera screen into the password eld on

the printer.

5 Choosetheprinter.

 Once the printer is ready for the

connection, press the <m> button when

the printer name is displayed on the

camera.

 When the printer has been added

successfully, the printing screen will be

displayed.

6 Chooseanimagetoprint.

 Press the <q><r> buttons to choose an

image.

 Press the <m> button, choose [c], and

press the <m> button again to access

the printing screen.

 Press the <o> buttons to choose

[Print], and then press the <m> button.

 Printing now begins.

 For detailed printing instructions, see

“Printing Images” (=

117).

• When you are in the vicinity of an access point that you have

previously connected to, the camera will automatically connect

to it in step 3. To change access points, select [Switch Network]

from the screen that will be displayed when the connection is

being established, and follow steps 4 – 5 in “Adding a Computer”

96).

• You can connect to printers that you have already connected to by choosing

them on the [Select a Device] screen in step 3.

• After you have accessed the Wi-Fi menu once, you can access it again by

pressing the <o> button. The recent target device is listed rst, so you can

easily connect again by pressing the <o> buttons to choose it. To add

a new device, display the device selection screen by pressing the <q><r>

buttons, and then congure the setting.

If you prefer not to display recent target devices, press the <n> button,

and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

COPY

101

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Sending Images

Send images wirelessly to destinations registered on the camera as follows.

• Images can be uploaded to social networking services or sent to email

addresses, via CANON iMAGE GATEWAY. For details, refer to the CANON

iMAGE GATEWAY website.

• Up to 50 images can be sent together at once. You can send movies together

as long as the total playback time is within two minutes. However, if the

destination is a Web service, the number of movies and images that can be

sent may be less depending on the Web service. See the desired Web service

for details.

• Depending on the condition of the network you are using, it may take a long

time to send movies. Be sure to keep an eye on the camera battery level.

• When connected to a computer, images are transferred using the computer

(included software CameraWindow) instead of the camera (=

98).

1 Choose[Selectandsend].

 Press the <o><q><r> buttons to

choose [Select and send], and then press

the <m> button.

2 Chooseimages.

 Press the <o><q><r> buttons to

choose an image to send, and then press

the <m> button. [

] is displayed.

 To cancel selection, press the <m>

button again. [

] is no longer displayed.

 Repeat this process to choose additional

images.

 After you nish choosing images, press

the <n> button.

3 Sendtheimages.

 Press the <o><q><r> buttons to

choose [

], and then press the <m>

button. Press the <o> buttons to

choose the resolution (size) of images

to send, and then press the <n>

button.

 Press the <o><q><r> buttons to

choose [Send], and then press the <m>

button.

 When uploading to YouTube, read the

press the <m> button.

 Image transfer will begin. The screen

darkens during image transfer.

 After images are uploaded to a Web

service, [OK] is displayed. Press the

<m> button to return to the playback

screen.

 After sending images to a camera or

smartphone, [Transfer completed] will be

displayed, and the display will return to

the image transfer screen.

COPY

102

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

• Keep your ngers or other objects off the Wi-Fi transmitter-

receiver. Covering this may decrease the speed of your image

transfers.

• On the screen, wireless signal strength is indicated by the

following icons.

[

] high, [ ] medium, [ ] low, [ ] weak

• To disconnect from the camera, press the <n> button.

After the conrmation message, press the <q><r> buttons to

choose [OK], and then press the <m> button. You can also use

the smartphone to end the connection.

• Only images larger than the resolution you selected in step 3

will be resized.

• Movies cannot be resized.

• To send only one of the displayed images, choose [Resize] on

the screen in step 1, change the size, and choose [Send this

image].

Wi-Fi Antenna

Area

Adding Comments

Using the camera, you can add comments (alphanumeric characters and

symbols) to images that you send to email addresses, social networking

services, etc. The number of characters and symbols that can be entered

may differ depending on the Web service.

1 Choose[ ].

 Press the <o><q><r> buttons to

choose [

], and then press the <m>

button.

2 Addacomment.

 Follow step 3 in “Registering a Camera

Nickname (First time only)” (=

88) to

add a comment.

3 Sendtheimage.

 Follow the steps in “Sending Images”

101) to send the image.

• When a comment is not entered, the comment set in CANON iMAGE

GATEWAY is automatically sent.

COPY

103

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Sending Images to a Computer via

CANON iMAGE GATEWAY

Images on the memory card that have not been transferred already can be

sent to a computer via CANON iMAGE GATEWAY.

If the computer that you intend to send images to is turned off, the images

will be stored temporarily on the CANON iMAGE GATEWAY server.

However, the images will be deleted after a while. Start up the computer so

that they can be saved.

1 Choosethetypeofimages

tosend(onlywhensending

movieswithimages).

 Press the <n> button, and then

choose [Wi-Fi Settings] on the [3] tab

28).

 Press the <o> buttons to choose

[Send via Server], press the <q><r>

buttons to choose [Stills/Movies], and

then press the <m> button.

 When sending only images, go to step 2.

2 Sendtheimages.

 Follow the steps in “Connecting to Web

Services” (=

90) to choose [ ].

 Once the connection is established, the

images are sent. (The screen will close in

about one minute.)

 After the images are sent, [OK] is

displayed. Press the <m> button to

return to the playback screen.

 When the images have been sent successfully

to the CANON iMAGE GATEWAY server, [ ]

is displayed on the screen.

3 Turnonthecomputer.

 Images are automatically saved to the

computer when you turn it on.

• When sending images, you should use a fully charged battery or an

AC adapter kit (sold separately, =

114).

• Even if images were imported to the computer through a different method, any

images not sent to the computer via CANON iMAGE GATEWAY will be sent to

the computer.

Geotagging Images on the Camera

GPS data recorded on a smartphone using the dedicated CameraWindow

application (=

91) can be added to images on the camera. Images are

tagged with information including the latitude, longitude, and elevation.

• Before shooting, make sure the date and time and your home time

zone are set correctly. (See Setting the Date and Time (=

13).)

Additionally, in [Time Zone] (=

108), specify any shooting

destinations that are in other time zones.

• The smartphone you will use for geotagging must be authorized to

view the images on the camera (=

92).

• Others may be able to locate or identify you by using location data

in your geotagged still images or movies. Be careful when sharing

these images with others, as when posting images online where

many others can view them.

COPY

104

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

Editing or Erasing Wi-Fi Settings

Edit or erase Wi-Fi settings as follows.

Editing Connection Information

Edit connection information saved to the camera. You can change device

nicknames (display names) that are displayed on the camera, and erase

connection information.

The following explains the procedure when the target device is a computer.

1 AccesstheWi-Fimenu.

 Pressing the <o> button will show recent

target devices. To access the Wi-Fi menu,

press the <q><r> buttons.

2 Chooseadevicetoedit.

 Press the <o><q><r> buttons to

choose the icon of the device to edit, and

then press the <m> button.

3 Choose[EditaDevice].

 Press the <o> buttons to choose

[Edit a Device], and then press the <m>

button.

4 Chooseadevicetoedit.

 Press the <o> buttons to choose

the device to edit, and then press the

<m> button.

5 Chooseanoptiontoedit.

 Press the <o> buttons to choose an

option to edit, and then press the <m>

button.

 The settings you can change depend on

what device or service the camera will

access.

CongurableSettings

Connection

Web

Services

[Change Device Nickname] (=

105)

O O O O

–

[View Settings] (=

92)

–

– – –

[Erase Connection Info] (=

105)

O O O O

–

: Congurable

–

: Not congurable

COPY

105

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Wi-FiFunctions

ChangingaDeviceNickname

You can change the device nickname (display name) that is displayed on

the camera.

Changethenickname.

 Following step 5 in “Editing Connection

Information” (=

104), choose [Change

Device Nickname] and press the <m>

button.

 Select the input eld and press the <m>

button. Use the keyboard displayed to

enter a new nickname (=

88).

ErasingConnectionInformation

Erase connection information (information about devices that you have

connected to) as follows.

1 Choose[EraseConnection

Info].

 Following step 5 in “Editing Connection

Information” (=

104), choose [Erase

Connection Info] and press the <m>

button.

2 Choosetheconnection

informationtoerase.

 After [Erase?] is displayed, press the

<q><r> buttons to choose [OK], and

then press the <m> button.

 The selected connection information will

be erased.

Returning the Wi-Fi Settings to Default

Return the Wi-Fi settings to default if you transfer ownership of the camera

to another person, or dispose of it.

1 Choose[Wi-FiSettings].

 Press the <n> button, and then

choose [Wi-Fi Settings] on the [3] tab

28).

2 Choose[ResetSettings].

 Press the <o> buttons to choose

[Reset Settings], and then press the

<m> button.

3 Restorethedefaultsettings.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

 The Wi-Fi settings are now reset.

• When returning the Wi-Fi settings to defaults, all Web services set using a

computer will also be erased from the camera. Be sure that you want to reset

all Wi-Fi settings before using this option.

To clear the settings completed in “Sending Images to a Computer via CANON

iMAGE GATEWAY” (=

103), connect your camera to the computer and use

CameraWindow to erase the connection information.

• To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] in the

[3] tab.

COPY

106

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SettingMenu

Setting Menu

Customize or adjust basic camera functions for greater

convenience

AdjustingBasicCamera

Functions...............................107

COPY

107

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SettingMenu

Adjusting Basic Camera Functions

Functions can be congured on the [3] tab. Customize commonly used

functions as desired, for greater convenience (=

28).

Silencing Camera Operations

Silence camera sounds and movies as follows.

 Choose [Mute], and then choose [On].

• Operation can also be silenced by holding down the button as you turn

the camera on.

• Sound is not played during movies if you mute camera sounds (=

67). To

restore sound during movies, press the <o> button. Adjust volume with the

<o> buttons, as needed.

Adjusting the Volume

Adjust the volume of individual camera sounds as follows.

 Choose [Volume], and then press the

<m> button.

 Choose an item, and then press the

<q><r> buttons to adjust the volume.

Hiding Hints and Tips

Hints and tips are normally shown when you choose FUNC. menu

27) or Menu (=

28) items. If you prefer, you can deactivate this

information.

 Choose [Hints & Tips], and then choose

[Off].

Date and Time

Adjust the date and time as follows.

 Choose [Date/Time], and then press the

<m> button.

 Press the <q><r> buttons to choose

an item, and then press the <o>

buttons to adjust the setting.

COPY

108

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SettingMenu

World Clock

To ensure that your shots will have the correct local date and time when you

travel abroad, simply register the destination in advance and switch to that

time zone. This convenient feature eliminates the need to change the Date/

Time setting manually.

Before using the world clock, be sure to set the date and time and your

home time zone, as described in Setting the Date and Time (=

13).

1 Specifyyourdestination.

 Choose [Time Zone], and then press the

<m> button.

 Press the <o> buttons to choose

[

World], and then press the <m>

button.

 Press the <q><r> buttons to choose the

destination.

 To set daylight saving time (1 hour

ahead), press the <o> buttons to

choose [

 Press the <m> button.

2 Switchtothedestinationtime

zone.

 Press the <o> buttons to choose

[

World], and then press the <n>

button.

 [ ] is now shown on the shooting screen

131).

• Adjusting the date or time while in [ ] mode (=

13) will automatically

update your [

Home] time and date.

Lens Retraction Timing

The lens is normally retracted for safety about one minute after you press

the <

> button in Shooting mode

(

). To have the lens retracted

immediately after you press the <

> button, set the retraction timing to [0 sec.].

 Choose [Lens Retract], and then choose

[0 sec.].

Using Eco Mode

This function allows you to conserve battery power in Shooting mode. When the

camera is not in use, the screen quickly darkens to reduce battery consumption.

1 Congurethesetting.

 Choose [Eco Mode], and then choose [On].

 [ ] is now shown on the shooting screen

131).

 The screen darkens when the camera is

not used for approximately two seconds;

approximately ten seconds after darkening,

the screen turns off. The camera turns off

after approximately three minutes of inactivity.

2 Shoot.

 To activate the screen and prepare for

shooting when the screen is off but the lens

is still out, press the shutter button halfway.

COPY

109

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SettingMenu

Power-Saving Adjustment

Adjust the timing of automatic camera and screen deactivation (Auto Power

Down and Display Off, respectively) as needed (=

25).

 Choose [Power Saving], and then press

the <m> button.

 After choosing an item, press the

<q><r> buttons to adjust it as needed.

• To conserve battery power, you should normally choose [On] for

[Auto Power Down] and [1 min.] or less for [Display Off].

• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].

• These power-saving functions are not available when you have set Eco mode

108) to [On].

Screen Brightness

Adjust screen brightness as follows.

 Choose [LCD Brightness], and then

press the <q><r> buttons to adjust the

brightness.

• For maximum brightness, press and hold the button for at least one

second when the shooting screen is displayed or when in single-image display.

(This will override the [LCD Brightness] setting on the [3] tab.) To restore

the original brightness, press and hold the button again for at least one

second or restart the camera.

Hiding the Start-up Screen

If you prefer, you can deactivate display of the start-up screen normally

shown when you turn the camera on.

 Choose [Start-up Image], and then

choose [Off].

Formatting Memory Cards

Before using a new memory card or a card formatted in another device, you

should format the card with this camera.

Formatting erases all data on a memory card. Before formatting, copy

images on the memory card to a computer, or take other steps to back them

up.

1 Accessthe[Format]screen.

 Choose [Format], and then press the

<m> button.

COPY

110

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SettingMenu

2 Choose[OK].

 Press the <o> buttons to choose

[Cancel], press the <q><r> buttons to

choose [OK], and then press the <m>

button.

3 Formatthememorycard.

 To begin the formatting process, press

the <o> buttons to choose [OK],

and then press the <m> button.

 When formatting is nished, [Memory

card formatting complete] is displayed.

Press the <m> button.

• Formatting or erasing data on a memory card only changes le

management information on the card and does not erase the data

completely. When transferring or disposing of memory cards, take

steps to protect personal information if necessary, as by physically

destroying cards.

• The total card capacity indicated on the formatting screen may be less than

the advertised capacity.

Low-LevelFormatting

Perform low-level formatting in these cases: [Memory card error] is

displayed, the camera is not working correctly, card image reading/writing is

slower, continuous shooting is slower, or movie recording suddenly stops.

Low-level formatting erases all data on a memory card. Before low-level

formatting, copy images on the memory card to a computer, or take other

steps to back them up.

 On the screen in step 2 of “Formatting

Memory Cards” (=

110), press the

<o> buttons to choose [Low Level

Format], and then press the <q><r>

buttons to select this option. A [

] icon is

displayed.

 Follow steps 2 – 3 in “Formatting Memory

Cards” (=

110) to continue with the

formatting process.

• Low-level formatting takes longer than Formatting Memory Cards (=

109),

because data is erased from all storage regions of the memory card.

• You can cancel low-level formatting in progress by choosing [Stop]. In this

case, all data will be erased, but the memory card can be used normally.

COPY

111

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SettingMenu

File Numbering

Your shots are automatically numbered in sequential order (0001 – 9999)

and saved in folders that store up to 2,000 images each. You can change

how the camera assigns le numbers.

 Choose [File Numbering], and then

choose an option.

Continuous

Images are numbered consecutively

(until the 9999th shot is taken/saved)

even if you switch memory cards.

Auto Reset

Image numbering is reset to 0001

if you switch memory cards, or

when a new folder is created.

• Regardless of the option selected in this setting, shots may be numbered

consecutively after the last number of existing images on newly inserted

memory cards. To start saving shots from 0001, use an empty (or formatted

109)) memory card.

• Refer to the Software Guide (=

18) for information on the card folder

structure and image formats.

Date-Based Image Storage

Instead of saving images in folders created each month, you can have the

camera create folders each day you shoot to store shots taken that day.

 Choose [Create Folder], and then choose

[Daily].

 Images will now be saved in folders

created on the shooting date.

Metric/Non-Metric Display

Change the unit of measurement shown in GPS information for elevation

68) and elsewhere from m/cm to ft/in as needed.

 Choose [Units], and then choose [ft/in].

Checking Certication Logos

Some logos for certication requirements met by the camera can be viewed

on the screen. Other certication logos are printed in this guide, on the

camera packaging, or on the camera body.

 Choose [Certication Logo Display], and

then press the <m> button.

COPY

112

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

SettingMenu

Display Language

Change the display language as needed.

 Choose [Language ], and then press

the <m> button.

 Press the <o><q><r> buttons to

choose a language, and then press the

<m> button.

• You can also access the [Language] screen in Playback mode by pressing and

holding the <m> button and immediately pressing the <n> button.

Adjusting Other Settings

The following settings can also be adjusted on the [3] tab.

• [Video System] (=

115)

• [Wi-Fi Settings] (=

83)

Restoring Defaults

If you accidentally change a setting, you can restore default camera

settings.

 Choose [Reset All], and then press the

<m> button.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

 Default settings are now restored.

• The following functions are not restored to default settings.

- Shooting mode (=

45)

- Colors chosen in Color Accent (=

49) or Color Swap (=

49)

- Custom white balance data you have recorded (=

58)

- Wi-Fi settings (=

83)

- [3] tab settings [Date/Time] (=

107), [Time Zone] (=

108), [Video

System] (=

115), and [Language ] (=

112)

COPY

113

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Enjoy the camera in more ways with optional Canon

accessories and other compatible accessories sold

separately

OptionalAccessories.............114

UsingOptionalAccessories..115

PrintingImages......................117

COPY

114

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Optional Accessories

The following camera accessories are sold separately. Note that availability

varies by area, and some accessories may no longer be available.

Power Supplies

BatteryPackNB-11L

 Rechargeable lithium-ion battery

BatteryChargerCB-2LF/CB-2LFE

 Charger for Battery Pack NB-11L

• CB-2LD and CB-2LDE are also supported.

• The battery includes a convenient cover which you can attach to know the

charging status at a glance. Attach the cover so that o is visible on a charged

battery, and attach it so that o is not visible on an uncharged battery.

ACAdapterKitACK-DC90

 For powering the camera using

household power. Recommended when

using the camera over extended periods,

or when connecting the camera to a

printer or computer. Cannot be used to

charge the camera battery.

• The battery charger and AC adapter kit can be used in areas with

100 – 240 V AC power (50/60 Hz).

• For power outlets in a different format, use a commercially available

adapter for the plug. Never use an electrical transformer designed

for traveling, which may damage the battery.

Flash Unit

High-PowerFlashHF-DC2

 External ash for illuminating subjects

that are out of range of the built-in ash.

High-Power Flash HF-DC1 can also be

used.

Other Accessories

AVCableAVC-DC400

 Connect the camera to a TV to enjoy

playback on the larger TV screen.

Printers

Canon-brandPictBridge-

CompatiblePrinters

 Printing images without a computer is

possible by connecting the camera to

a Canon-brand PictBridge-compatible

printer. For details, visit your nearest

Canon dealer.

COPY

115

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images Movies

Using Optional Accessories

Still Images Movies

Playback on a TV

Connecting the camera to a TV with the AV Cable AVC-DC400 (sold

separately) enables you to view your shots on the larger screen of the TV

as you control the camera.

For details on connection or how to switch inputs, refer to the TV manual.

• Some information may not be displayed on the TV (=

132).

1 MakesurethecameraandTV

areoff.

2 ConnectthecameratotheTV.

 On the TV, insert the cable plugs fully into

the video inputs as shown.

 On the camera, open the terminal cover

and insert the cable plug fully into the

camera terminal.

Black or white

Yellow

Black

3 TurntheTVonandswitchto

videoinput.

 Switch the TV input to the video input you

connected the cable to in step 2.

4 Turnthecameraon.

 Press the <1> button to turn the camera

on.

 Images from the camera are now

displayed on the TV. (Nothing is

displayed on the camera screen.)

 When nished, turn off the camera and

TV before disconnecting the cable.

• Correct display is not possible unless the camera video output

format (NTSC or PAL) matches the TV format. To change the

video output format, press the <n> button and choose [Video

System] on the [3] tab.

• When the camera and TV are connected, you can also shoot while previewing

shots on the larger screen of the TV. To shoot, follow the same steps as when

using the camera screen.

However, AF-Point Zoom (=

41) and Stitch Assist (=

53) are not

available.

COPY

116

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images Movies

Powering the Camera with Household Power

Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)

eliminates the need to monitor the remaining battery level.

1 Makesurethecameraisoff.

2 Openthecover.

 Follow step 2 in “Inserting the Battery

and Memory Card” (=

12) to open

the memory card/battery cover, and then

open the coupler cable port cover as

shown.

3 Insertthecoupler.

 Insert the coupler facing the direction

shown, just as you would a battery

(following step 3 in “Inserting the Battery

and Memory Card” (=

12)).

 Make sure the coupler cable passes

through the port.

Terminals

Coupler Cable Port

4 Closethecover.

 Lower the cover ( ) and hold it down as

you slide it, until it clicks into the closed

position (

5 Connectthepowercord.

 Insert the adapter plug into the end of the

coupler cable.

 Insert one end of the power cord into the

compact power adapter, and then plug

the other end into a power outlet.

 Turn the camera on and use it as desired.

 When nished, turn the camera off and

unplug the power cord from the outlet.

• Do not disconnect the adapter or unplug the power cord while

the camera is still on. This may erase your shots or damage the

camera.

• Do not attach the adapter or adapter cord to other objects. Doing so

could result in malfunction or damage to the product.

COPY

117

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images Movies

Printing Images

Your shots can easily be printed by connecting the camera to a printer. On

the camera, you can specify images to set up batch printing, prepare orders

for photo development services, and prepare orders or print images for

photobooks.

A Canon SELPHY CP series compact photo printer is used here for the

sake of illustration. Screens displayed and available functions vary by

printer. Also refer to the printer manual for additional information.

Still Images

Easy Print

Easily print your shots by connecting the camera to a PictBridge-compatible

printer (sold separately) with the included interface cable (=

2).

1 Makesurethecameraand

printerareoff.

2 Connectthecameratothe

printer.

 Open the cover. Holding the smaller

cable plug in the orientation shown, insert

the plug fully into the camera terminal.

 Connect the larger cable plug to the

printer. For other connection details, refer

to the printer manual.

3 Turntheprinteron.

4 Turnthecameraon.

 Press the <1> button to turn the camera

on.

5 Chooseanimage.

 Press the <q><r> buttons to choose an

image.

6 Accesstheprintingscreen.

 Press the

<m>

button, choose [c], and

press the

<m>

button again.

7 Printtheimage.

 Press the <o> buttons to choose

[Print], and then press the <m> button.

 Printing now begins.

 To print other images, repeat steps 5 – 6

after printing is nished.

 When you are nished printing, turn the

camera and printer off and disconnect

the cable.

• For Canon-brand PictBridge-compatible printers (sold separately), see

“Printers” (=

114).

COPY

118

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images

Conguring Print Settings

1 Accesstheprintingscreen.

 Follow steps 1 – 6 in “Easy Print”

117) to access the screen at left.

2 Congurethesettings.

 Press the <o> buttons to choose an

item, and then press the <q><r> buttons

to choose an option.

Default Matches current printer settings.

Date Prints images with the date added.

File No. Prints images with the le number added.

Both Prints images with both the date and le number added.

Off

–

Default Matches current printer settings.

Off

–

Uses information from the time of shooting to print under

optimal settings.

Red-Eye 1 Corrects red-eye.

No. of Copies Choose the number of copies to print.

Cropping

–

Specify a desired image area to print (=

118).

Paper

Settings

–

Specify the paper size, layout, and other details

119).

Still Images

CroppingImagesBeforePrinting(Cropping)

By cropping images before printing, you can print a desired image area

instead of the entire image.

1 Choose[Cropping].

 After following step 1 in “Conguring Print

Settings” (=

118) to access the printing

screen, choose [Cropping] and press the

<m> button.

 A cropping frame is now displayed,

indicating the image area to print.

2 Adjustthecroppingframeas

needed.

 To resize the frame, move the zoom lever.

 To move the frame, press the

<o><q><r> buttons.

 To rotate the frame, press the <m>

button.

 Press the <n> button, press the

<o> buttons to choose [OK], and

then press the <m> button.

3 Printtheimage.

 Follow step 7 in “Easy Print” (=

117)

to print.

• Cropping may not be possible at small image sizes, or at some

aspect ratios.

• Dates may not be printed correctly if you crop images shot with

[Date Stamp

] selected.

COPY

119

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images

ChoosingPaperSizeandLayoutBeforePrinting

1 Choose[PaperSettings].

 After following step 1 in “Conguring Print

Settings” (=

118) to access the printing

screen, choose [Paper Settings] and

press the <m> button.

2 Chooseapapersize.

 Press the <o> buttons to choose an

option, and then press the <m> button.

3 Chooseatypeofpaper.

 Press the <o> buttons to choose an

option, and then press the <m> button.

4 Choosealayout.

 Press the <o> buttons to choose

an option.

 When choosing [N-up], press the

<q><r> buttons to specify the number of

images per sheet.

 Press the <m> button.

5 Printtheimage.

AvailableLayoutOptions

Default Matches current printer settings.

Bordered Prints with blank space around the image.

Borderless Borderless, edge-to-edge printing.

N-up Choose how many images to print per sheet.

ID Photo

Prints images for identication purposes.

Only available for images with a resolution of L and an aspect ratio of

4:3.

Fixed Size

Choose the print size.

Choose from 3.5 x 5 in., postcard, or wide-format prints.

COPY

120

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images

PrintingIDPhotos

1 Choose[IDPhoto].

 Following steps 1 – 4 in “Choosing

Paper Size and Layout Before Printing”

119), choose [ID Photo] and press

the <m> button.

2 Choosethelongandshortside

length.

 Press the <o> buttons to choose

an item. Choose the length by pressing

the <q><r> buttons, and then press the

<m> button.

3 Choosetheprintingarea.

 Follow step 2 in “Cropping Images Before

Printing (Cropping)” (=

118) to choose

the printing area.

4 Printtheimage.

Movies

Printing Movie Scenes

1 Accesstheprintingscreen.

 Follow steps 1 – 6 in “Easy Print”

117) to choose a movie. The screen

at left is displayed.

2 Chooseaprintingmethod.

 Press the <o> buttons to choose

[

], and then press the <q><r> buttons

to choose the printing method.

3 Printtheimage.

MoviePrintingOptions

Single Prints the current scene as a still image.

Sequence

Prints a series of scenes, a certain interval apart, on a single sheet of

paper. You can also print the folder number, le number, and elapsed

time for the frame by setting [Caption] to [On].

• To cancel printing in progress, press the <m> button.

• [ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridge-

compatible printers from CP720/CP730 and earlier models.

COPY

121

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images

Adding Images to the Print List (DPOF)

Batch printing (=

123) and ordering prints from a photo development

service can be set up on the camera. Choose up to 998 images on a

memory card and congure relevant settings, such as the number of copies,

as follows. The printing information you prepare this way will conform to

DPOF (Digital Print Order Format) standards.

Still Images

ConguringPrintSettings

Specify the printing format, whether to add the date or le number, and

other settings as follows. These settings apply to all images in the print list.

 Press the <n> button, and then

choose [Print Settings] on the [2] tab.

Choose and congure settings as desired

28).

PrintType

Standard One image is printed per sheet.

Index

Smaller versions of multiple images are printed

per sheet.

Both Both standard and index formats are printed.

Date

On Images are printed with the shooting date.

Off

–

FileNo.

On Images are printed with the le number.

Off

–

ClearDPOF

data

All image print list settings are cleared after

printing.

Off

–

• Not all of your DPOF settings may be applied in printing by the

printer or photo development service, in some cases.

• [

] may be displayed on the camera to warn you that the memory

card has print settings that were congured on another camera.

Changing the print settings using this camera may overwrite all

previous settings.

• Setting [Date] to [On] may cause some printers to print the date twice.

• Specifying [Index] will prevent you from choosing [On] for both [Date] and [File

No.] at the same time.

• The date is printed in a format matching setting details in [Date/Time] on the

[3] tab, accessible by pressing the <n> button (=

13).

• Index printing is not available on some Canon-brand PictBridge-compatible

printers (sold separately).

Still Images

SettingUpPrintingforIndividualImages

1 Choose[SelectImages&Qty.].

 Press the <n> button, choose

[Select Images & Qty.] on the [2] tab,

and then press the <m> button.

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

 You can now specify the number of copies.

 If you specify index printing for the image,

it is labeled with a [

] icon. To cancel

index printing for the image, press the

<m> button again. [

] is no longer

displayed.

COPY

122

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

3 Specifythenumberofprints.

 Press the <o> buttons to specify

the number of prints (up to 99).

 To set up printing for other images and

specify the number of prints, repeat steps

2 – 3.

 Printing quantity cannot be specied for

index prints. You can only choose which

images to print, by following step 2.

 When nished, press the <n> button

to return to the menu screen.

Still Images

SettingUpPrintingforaRangeofImages

 Following step 1 in “Setting Up Printing

for Individual Images” (=

121), choose

[Select Range] and press the <m>

button.

 Follow steps 2 – 3 in “Selecting a Range”

73) to specify images.

 Press the <o> buttons to choose

[Order], and then press the <m> button.

Still Images

SettingUpPrintingforAllImages

 Following step 1 in “Setting Up Printing

for Individual Images” (=

121), choose

[Select All Images] and press the <m>

button.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

Still Images

ClearingAllImagesfromthePrintList

 Following step 1 in “Setting Up Printing

for Individual Images” (=

121), choose

[Clear All Selections] and press the <m>

button.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

COPY

123

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images

PrintingImagesAddedtothePrintList(DPOF)

 When images have been added to the

print list (=

121 – 122), the screen

at left is displayed after you connect

the camera to a PictBridge-compatible

printer. Press the <o> buttons to

choose [Print now], and then simply press

the <m> button to print the images in the

print list.

 Any DPOF print job that you temporarily

stop will be resumed from the next image.

Still Images

Adding Images to a Photobook

Photobooks can be set up on the camera by choosing up to 998 images

on a memory card and importing them into the software on your computer,

where they are stored in their own folder. This is convenient when ordering

printed photobooks online or printing photobooks with your own printer.

ChoosingaSelectionMethod

 Press the <n> button, choose

[Photobook Set-up] on the [1] tab, and

then choose how you will select images.

• [ ] may be displayed on the camera to warn you that the memory

card has print settings that were congured on another camera.

Changing the print settings using this camera may overwrite all

previous settings.

• After importing images to your computer, also refer to the Software Guide

18) and the printer manual for further information.

Still Images

AddingImagesIndividually

1 Choose[Select].

 Following the procedure in “Choosing

a Selection Method” (=

123), choose

[Select] and press the <m> button.

2 Chooseanimage.

 Press the <q><r> buttons to choose an

image, and then press the <m> button.

 [ ] is displayed.

 To remove the image from the photobook,

press the <m> button again. [

] is no

longer displayed.

 Repeat this process to specify other

images.

 When nished, press the <n> button

to return to the menu screen.

COPY

124

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Accessories

Still Images

AddingAllImagestoaPhotobook

 Following the procedure in “Choosing

a Selection Method” (=

123), choose

[Select All Images] and press the <m>

button.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

Still Images

RemovingAllImagesfromaPhotobook

 Following the procedure in “Choosing

a Selection Method” (=

123), choose

[Clear All Selections] and press the <m>

button.

 Press the <q><r> buttons to choose

[OK], and then press the <m> button.

COPY

125

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Helpful information when using the camera

Troubleshooting.....................126

On-ScreenMessages.............129

On-ScreenInformation..........131

FunctionsandMenu

Tables.....................................134

HandlingPrecautions............140

Specications.........................140

COPY

126

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Troubleshooting

If you think there is a problem with the camera, rst check the following.

If the items below do not solve your problem, contact a Canon Customer

Support Help Desk.

Power

Nothinghappenswhenthepowerbuttonispressed.

• Conrm that the battery is charged (=

11).

• Conrm that the battery is inserted facing the correct way (=

12).

• Conrm that the memory card/battery cover is fully closed (=

12).

• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a

cotton swab and reinserting the battery a few times.

Thebatteryisdepletedquickly.

• Battery performance decreases at low temperatures. Try warming the battery a little

by putting it in your pocket, for example, ensuring that the terminals do not touch any

metal objects.

• If these measures do not help and the battery is still depleted soon after charging, it

has reached the end of its life. Purchase a new battery.

Thelensisnotretracted.

• Do not open the memory card/battery cover while the camera is on. Close the cover,

turn the camera on, and then turn it off again (=

12).

Thebatteryisswollen.

• Battery swelling is normal and does not pose any safety concerns. However, if battery

swelling prevents the battery from tting in the camera, contact a Canon Customer

Support Help Desk.

Display on a TV

CameraimageslookdistortedornotdisplayedonaTV(=



115).

Shooting

Cannotshoot.

• In Playback mode (=

14), press the shutter button halfway (=

26).

Strangedisplayonthescreenunderlowlight(=



26).

Strangedisplayonthescreenwhenshooting.

Note that the following display problems are not recorded in still images but are

recorded in movies.

• The screen may darken under bright light.

• The screen may icker under uorescent or LED lighting.

• Purplish banding may appear on the screen if you compose a shot that includes a

bright light source.

Nodatestampisaddedtoimages.

• Congure the [Date Stamp ] setting (

107

). Note that date stamps are not added to

images automatically, merely because you have congured the [Date/Time] setting (

37).

• Date stamps are not added in shooting modes (=

138) in which this setting cannot

be congured (=

37).

[h]ashesonthescreenwhentheshutterbuttonispressed,and

shootingisnotpossible(=



32).

[ ]isdisplayedwhentheshutterbuttonispressedhalfway(=



37).

• Set [IS Mode] to [Continuous] (=

65).

• Set the ash mode to [h] (=

64).

• Increase the ISO speed (=

56).

• Mount the camera on a tripod or take other measures to keep it still. In this case, you

should set [IS Mode] to [Off] (=

65).

Shotsareoutoffocus.

• Press the shutter button halfway to focus on subjects before pressing it all the way

down to shoot (=

26).

• Make sure subjects are within focusing range (=

142).

• Set [AF-assist Beam] to [On] (=

42).

• Conrm that unneeded functions such as macro are deactivated.

• Try shooting with focus lock or AF lock (=

62, 63).

NoAFframesaredisplayedandthecameradoesnotfocuswhenthe

shutterbuttonispressedhalfway.

• To have AF frames displayed and the camera focus correctly, try composing the

shot with higher-contrast subject areas centered before you press the shutter button

halfway. Otherwise, try pressing the shutter button halfway repeatedly.

COPY

127

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Subjectsinshotslooktoodark.

• Set the ash mode to [h] (=

64).

• Adjust brightness by using exposure compensation (=

55).

• Adjust contrast by using i-Contrast (=

57, 80).

• Use AE lock or spot metering (=

55, 56).

Subjectslooktoobright,highlightsarewashed-out.

• Set the ash mode to [!] (=

37).

• Adjust brightness by using exposure compensation (=

55).

• Use AE lock or spot metering (=

55, 56).

• Reduce the lighting on subjects.

Shotslooktoodarkdespitetheashring(=



32).

• Shoot within ash range (=

142).

• Increase the ISO speed (=

56).

Subjectsinashshotslooktoobright,highlightsarewashed-out.

• Shoot within ash range (=

142).

• Set the ash mode to [!] (=

37).

Whitedotsorsimilarimageartifactsappearinashshots.

• This is caused by light from the ash reecting off dust or airborne particles.

Shotslookgrainy.

• Lower the ISO speed (=

56).

Subjectsareaffectedbyred-eye(=



39).

• Set [Red-Eye Lamp] to [On] (=

42) to activate the red-eye reduction lamp

3) in ash shots. Note that while the red-eye reduction lamp is on (for about

one second), it is not possible to shoot, because the lamp is counteracting red-eye.

For best results, have subjects look at the red-eye reduction lamp. Also try increasing

the lighting in indoor scenes and shooting at closer range.

• Edit images using red-eye correction (=

81).

Recordingtothememorycardtakestoolong,orcontinuousshootingisslower.

• Use the camera to perform low-level formatting of the memory card (=

110).

ShootingsettingsorFUNC.menusettingsarenotavailable.

• Available setting items vary by shooting mode. Refer to “Functions Available in Each

Shooting Mode”, “FUNC. Menu”, and “Shooting Menu” (=

134 – 137).

Shooting Movies

Theelapsedtimeshownisincorrect,orrecordingisinterrupted.

• Use the camera to format the memory card, or switch to a card that supports high-

speed recording. Note that even if the elapsed time display is incorrect, the length of

movies on the memory card corresponds to the actual recording time (

109, 142

[ ]isdisplayedandshootingstopsautomatically.

The camera’s internal memory buffer lled up as the camera could not record to the

memory card quickly enough. Try one of the following measures.

• Use the camera to perform low-level formatting of the memory card (=

110).

• Lower the image quality (=

40).

• Switch to a memory card that supports high-speed recording (=

142).

Zoomingisnotpossible.

• Zooming is not possible when shooting movies in [ ] mode (=

47).

Playback

Playbackisnotpossible.

• Image or movie playback may not be possible if a computer is used to rename les or

alter the folder structure. Refer to the Software Guide (=

18) for details on folder

structure and le names.

Playbackstops,oraudioskips.

• Switch to a memory card that you have performed low-level formatting on with the

camera (=

110).

• There may be brief interruptions when playing movies copied to memory cards that

have slow read speeds.

• When movies are played on a computer, frames may be dropped and audio may skip

if computer performance is inadequate.

Soundisnotplayedduringmovies.

• Adjust the volume (=

67) if you have activated [Mute] (=

107) or the sound in

the movie is faint.

• No sound is played for movies shot in [

] mode (=

47) because audio is not

recorded in this mode.

Memory Card

Thememorycardisnotrecognized.

• Restart the camera, with the memory card in it (=

12).

COPY

128

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Computer

Cannottransferimagestoacomputer.

When attempting to transfer images to the computer via a cable, try reducing the

transfer speed as follows.

• Press the <1> button to enter Playback mode. Hold the <n> button down as

you press the <o> and <m> buttons at the same time. On the next screen, press

the <q><r> buttons to choose [B], and then press the <m> button.

Wi-Fi

CannotaccesstheWi-Fimenubypressingthe<o>button.

• The Wi-Fi menu is not available in Shooting mode. Switch to Playback mode and try

again.

• In Playback mode, the Wi-Fi menu cannot be accessed during detailed information

display, magnied display, or index display. Switch to single-image display and a

viewing mode other than detailed information display. Similarly, the Wi-Fi menu

cannot be accessed during ltered image display according to specied conditions.

Cancel the playback state of the image in image search mode.

• The Wi-Fi menu cannot be accessed while the camera is connected to a printer,

computer, or TV via a cable. Disconnect the cable.

Cannotaddadevice/destination.

• A total of 20 items of connection information can be added to the camera. Erase

unneeded connection information from the camera rst, and then add new devices/

destinations (=

104).

• To add Web services to send images to, install CameraWindow and complete the

settings in CameraWindow (=

89).

• To add a smartphone as a device, rst install the dedicated application

CameraWindow on your smartphone.

• To add a computer as a device, rst install the included software CameraWindow

on the computer. Also check your computer and Wi-Fi environment and settings

94, 95).

• Do not use the camera near sources of Wi-Fi signal interference, such as microwave

ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.

• Bring the camera closer to the other device you are trying to connect to (such as the

access point), and make sure there are no objects between the devices.

Cannotsendimages.

• The destination device has insufcient storage space. Increase the storage space on

the destination device and resend the images.

• The write-protect tab of the memory card in the destination camera is set to the

locked position. Slide the write-protect tab to the unlocked position.

Cannotresizeimagesforsending.

• Images cannot be resized to be bigger than the resolution setting of their original size.

• Movies cannot be resized.

Imagestakealongtimetosend./TheWi-Ficonnectionisdisrupted.

• Multiple images may take a long time to send. Try resizing the image to [ ] or [ ]

to reduce sending time (=

101).

• Movies may take a long time to send.

• Do not use the camera near sources of Wi-Fi signal interference, such as microwave

ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note

that images may take a long time to send even when [

] is displayed.

• Bring the camera closer to the other device you are trying to connect to (such as the

access point), and make sure there are no objects between the devices.

• When sending images to a computer from a memory card with a large amount

of images (approximately 1,000), the connection may be disrupted. Import any

necessary images to a computer, and then reduce the number of images on the

memory card by erasing unnecessary images.

WanttoeraseWi-Ficonnectioninformationbeforedisposingofthe

cameraorgivingittosomeoneelse.

• Reset the Wi-Fi settings (=

105).

COPY

129

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

On-Screen Messages

If an error message is displayed, respond as follows.

Nomemorycard

• The memory card may be inserted facing the wrong way. Reinsert the memory card

facing the correct way (=

12).

Memorycardlocked

• The write-protect tab of the memory card is set to the locked position. Switch the

write-protect tab to the unlocked position (=

12).

Cannotrecord!

• Shooting was attempted without a memory card in the camera. To shoot, insert a

memory card facing the correct way (=

12).

Memorycarderror(=



110)

• If the same error message is displayed even after you have formatted a supported

memory card (=

2) and have inserted it facing the correct way, contact a Canon

Customer Support Help Desk (=

12).

Insufcientspaceoncard

• There is not enough free space on the memory card to shoot (=

30, 44, 54)

or edit images (=

78 – 81). Either erase unneeded images (=

74) or insert a

memory card with enough free space (=

12).

Chargethebattery(=



1 1 )

NoImage.

• The memory card does not contain any images that can be displayed.

Protected!(=



72)

UnidentiedImage/IncompatibleJPEG/Imagetoolarge./Cannotplay

backMOV/CannotplaybackMP4

• Unsupported or corrupt images cannot be displayed.

• It may not be possible to display images that were edited or renamed on a computer,

or images shot with another camera.

Cannotmagnify!/CannotplaybackthiscontentinSmartShufe/

Cannotrotate/Cannotmodifyimage/Cannotmodify/Cannotassignto

category/Unselectableimage.

• The following functions may be unavailable for images that were renamed or already

edited on a computer, or images shot with another camera. Note that starred (*)

functions are not available for movies. Magnify* (=

70), Smart Shufe* (=

72),

Rotate (=

76), Edit* (=

78 – 81), Print List* (=

121), and Photobook Set-

up* (=

123).

Invalidselectionrange

• When specifying a range for image selection (=

73, 76, 122), you attempted to

choose an initial image that was after the nal image, or vice-versa.

Exceededselectionlimit

• More than 998 images were selected for Print List (=

121) or Photobook Set-up

123). Choose 998 images or less.

• Print List (=

121) or Photobook Set-up (=

123) settings could not be saved

correctly. Reduce the number of selected images and try again.

• You attempted to choose more than 500 images in Protect (=

72), Erase

74), Favorites (=

77), Print List (=

121), or Photobook Set-up (=

123).

Communicationerror

• An excessive amount of images (approx. 1,000) on the memory card prevented printing

or image transfer to a computer. To transfer the images, use a commercially available

USB card reader. To print, insert the memory card directly into the printer card slot.

Namingerror!

• The folder could not be created or images could not be recorded, because the highest

supported folder number (999) for storing images on the card has been reached and

the highest supported image number (9999) for images in folders has been reached.

In the [3] menu, change [File Numbering] to [Auto Reset] (=

111), or format the

memory card (=

109).

LensError

• This error may occur if the lens is held while it is moving, or when the camera is used

in dusty or sandy locations.

• Frequent display of this error message may indicate camera damage. In this case,

contact a Canon Customer Support Help Desk.

COPY

130

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Acameraerrorwasdetected(error number)

• If this error message is displayed immediately after a shot, the image may not have

been saved. Switch to Playback mode to check for the image.

• Frequent display of this error message may indicate camera damage. In this case,

write down the error number (Exx) and contact a Canon Customer Support Help

Desk.

FileError

• Correct printing (=

117) may not be possible for photos from other cameras or

images that have been altered using computer software, even if the camera is

connected to the printer.

Printerror

• Check the paper size setting (=

119). If this error message is displayed when the

setting is correct, restart the printer and complete the setting on the camera again.

Inkabsorberfull

• Contact a Canon Customer Support Help Desk to request assistance with ink

absorber replacement.

Wi-Fi

Connectionfailed

• No access points were recognized. Check the access point settings (=

96).

• A device could not be found. Turn the camera off and on again, and retry the

connection.

• Check the device you want to connect to and make sure it is ready for connection.

Cannotdetermineaccesspoint

• The WPS buttons on numerous access points were pressed simultaneously. Try

reconnecting again.

Noaccesspointsfound

• Check to make sure that the access point is turned on.

• When connecting to an access point manually, make sure that you entered the

correct SSID.

IncorrectWi-Fiencryptionkey/IncorrectWi-Fisecuritysettings

• Check the access point security settings (=

95).

IPaddressconict

• Reset the IP address so that it does not conict with another.

Disconnected/Receivingfailed/Sendingfailed

• You may be in an environment where Wi-Fi signals are obstructed.

• Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices,

and other devices that operate on the 2.4 GHz band.

• Bring the camera closer to the other device you are trying to connect to (such as the

access point), and make sure there are no objects between the devices.

• Check the connected device to make sure it is not experiencing errors.

Sendingfailed

Memorycarderror

• If the same error message is displayed even when you have inserted a formatted

memory card facing the correct way, contact a Canon Customer Support Help Desk.

COPY

131

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Receivingfailed

Insufcientspaceoncard

• There is not enough free space on the memory card to receive images. Erase images

to create space on the memory card, or insert a memory card with sufcient space.

Receivingfailed

Memorycardlocked

• The write-protect tab of the memory card in the camera to receive the images is set to

the locked position. Slide the write-protect tab to the unlocked position.

Receivingfailed

Namingerror!

• When the highest folder number (999), and the highest image number (9999) have

been reached on the receiving camera, images cannot be received.

Insufcientspaceonserver

• Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.

• Save the images sent via a server (=

103) on your computer.

SSLcerticatenotvalid

Connecttoacomputer,usethesuppliedsoftwaretoreset

• Check to make sure the date/time settings on the camera are correct. After conrming

that the settings are correct, follow the on-screen instructions and reset the settings.

Checknetworksettings

• Check to make sure your computer can connect to the Internet with the current

network settings.

On-Screen Information

Shooting (Information Display)

Battery level

132)

White balance

57)

My Colors (=

58)

Drive mode

59)

Eco mode (=

108)

Self-timer (=

35)

Grid lines (=

40)

Camera shake

warning (=

32)

Metering method

56)

Compression (image

quality) (=

65) /

Resolution (=

39)

Recordable shots

141)

Movie resolution

40)

Remaining time

142)

Digital zoom

magnication

35), Digital

tele-converter

60)

Shooting mode

134), Scene

icon (=

33)

Focusing range

60), AF lock

63)

COPY

132

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Flash mode

37, 64)

Red-eye correction

39)

Spot AE point frame

56)

AF frame (=

61)

Image stabilization

65)

Date stamp

37)

ISO speed (=

56)

Time zone (=

108)

AE lock (=

55),

FE lock (=

64)

Shutter speed

Aperture value

Exposure

compensation level

55)

i-Contrast (=

57)

Zoom bar (=

31)

IS mode icon

34)

Blink detection

41)

Exposure

compensation bar

55)

BatteryLevel

An on-screen icon or message indicates the battery charge level.

Display Details

Sufcient charge

Slightly depleted, but sufcient

(Blinking red)

Nearly depleted—charge the battery soon

[Charge the battery] Depleted—charge the battery immediately

Playback (Detailed Information Display)

Movies (=

31,

67) / GPS

information display

68)

Shooting mode

134)

ISO speed

56), Playback

speed (=

47)

Exposure

compensation level

55)

White balance

57)

Histogram (=

68)

Image editing

78 – 81)

Compression (image

quality) (=

65) /

Resolution (=

39,

40), MOV

(movies)

Images have been

saved on a computer

103)

Battery level

132)

Metering method

56)

Folder number - File

number (=

111)

Current image no. /

Total no. of images

Shutter speed (still

images), Image

quality / Frame rate

(movies) (=

40)

Aperture value

i-Contrast (=

57,

80)

Flash (=

64)

Focusing range

60)

File size

Still images:

Resolution (=

141)

Movies: Playback

time (=

142)

COPY

133

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Protection (=

72)

Favorites (=

77)

My Colors (=

58,

80)

Red-eye correction

39, 81)

Shooting date/time

13)

• Some information may not be displayed when viewing images on a TV

115).

SummaryofMovieControlPanelin“Viewing”(=



67)

Exit

Play

Slow Motion (Press the <q><r> buttons to adjust the playback speed. No

sound is played.)

Skip Backward* (To continue skipping backward, keep holding down the <m>

button.)

Previous Frame (For fast-rewind, keep holding down the <m> button.)

Next Frame (For fast-forward, keep holding down the <m> button.)

Skip Forward* (To continue skipping forward, keep holding down the <m>

button.)

* Edit (=

81)

Shown when the camera is connected to a PictBridge-compatible printer

117).

* Displays the frame approx. 4 sec. before or after the current frame.

• To skip forward or back during movie playback, press the <q><r> buttons.

COPY

134

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Functions and Menu Tables

Functions Available in Each Shooting Mode

ShootingMode

Function

G I

P t N

Exposure Compensation (=

55)

–

O O O O O O O O O O O

– –

O O

–

Flash (=

37, 64)

O O O O O O O O O O O O O O O

– – –

–

O O O O O

–

O O O O O O O O

–

O O

– – – – – – – – – – – – – – –

O O O O O O O O O O O O O O O O O O

AE Lock (=

55)/FE Lock (=

64)*

–

– – – – – – – – – – – – – – – –

AF Lock (=

63)

–

– – – – – – – – – – – – – –

–

Focusing Range (=

60)

O O O O O O O O O O O O O O O O O O

e u

–

O O

– – –

O O O O O O O O O

–

O O

Tracking AF (=

61)

–

O O

– – –

O O O O O

–

Screen Display (=

26)

No Information Display

O O O

– – –

– – – –

O O

–

O O O

–

Information Display

O O O O O O O O O O O O O O O O O O

*1 Not available, but switches to [Z] in some cases.

*2 FE lock not available in [!] ash mode.

Available or set automatically.

–

Not available.

COPY

135

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

FUNC. Menu

ShootingMode

Function

G I

P t N

Metering Method (=

56)

O O O O O O O O O O O O O O O O O O

–

– – – – – – – – – – – – – – – –

My Colors (=

58)

O O O O O O O O O O O O O O O O O O

–

O O O

– – – – – – – – – –

O O

White Balance (=

57)

O O O O O O O O O O O O O O O O O O

–

O O O O

– – – – – – – – –

O O

ISO Speed (=

56)

O O O O O O O O O O O O O O O O O O

–

– – – – – – – – – – – – – –

–

Self-Timer (=

35)

O O O O O O O O O O O O O O O O O O

] [ $

O O O

– – –

O O O O O O O O O O O O

Self-Timer Settings (=

36)

Delay*

O O O

– – –

O O O O O O O O O O O O

Shots*

O O O

– – –

O O O O O O O O O O O

–

Drive Mode (=

59)

O O O O O O O O O O O O O O O O O O

–

O O

– – –

O O O O O O O O O O

– –

Still Image Aspect Ratio (=

38)

O O O O O O

– –

–

O O O O O O O

–

*1 White balance is not available.

Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.

*3 Not available in [x] or [v].

*4 Cannot be set to 0 seconds in modes without selection of the number of shots.

*5 One shot (cannot be modied) in modes without selection of the number of shots.

*6 Only [

] and [ ] are available.

Available or set automatically.

–

Not available.

COPY

136

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

ShootingMode

Function

G I

P t N

Resolution (=

39)

O O O O O O

–

O O O O O O O O O O O

O O O O O O

– – – – – – – –

O O O O

– – – – – –

– – – – – – – – – – –

O O O O O O

– – – – – – – –

O O O O

Compression (=

65)

–

– – – – – – – – – – – – – – – –

O O O O O O O O O O O O O O O O O O

Movie Quality (=

40)

O O O O O O O O

O O O O O O O O O

*1 Synchronizes with the aspect ratio setting and is automatically set (=

47).

Available or set automatically.

–

Not available.

COPY

137

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

4 Shooting Menu

ShootingMode

Function

G I

P t N

AF Frame (=

61)

Face AiAF*

O O O O O O O

– –

O O O O O O

–

Tracking AF

–

O O

– – –

O O O O O

–

Center

–

O O

– – –

O O

–

O O O O O O O O O

AF Frame Size (=

62)*

Normal

–

O O

– – –

O O

–

O O O O O O

–

O O

Small

–

O O

– – –

– –

O O O O O O

–

Digital Zoom (=

35, 60)

Standard

O O O O O O

– – – – – – – –

O O O

–

Off

O O O O O O O O O O O O O O O O O O

1.6x/2.0x

–

– – – – – – – – – – – – – – – –

AF-Point Zoom (=

41)

O O O O O O O

– – –

O O O O O

–

Off

O O O O O O O O O O O O O O O O O O

Servo AF (=

62)

–

O O

– – –

O O O O O

– – –

Off

O O O O O O O O O O O O O O O O O

Continuous AF (=

63)

O O O O O O

–

O O O O O O O O

–

O O

Off

–

O O

– – –

O O O O O O O O O O O O

AF-assist Beam (=

42)

O O O O O O O O O O O O O O O

–

O O

Off

O O O

–

O O O O O O O O O O O O O O

*1 Operation when no faces are detected varies by shooting mode.

*2 Available when the AF frame is set to [Center].

*3 [On] when subject movement is detected in [

] mode.

Available or set automatically.

–

Not available.

COPY

138

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

ShootingMode

Function

G I

P t N

Flash Settings (=

39, 42)

Red-Eye Corr.

O O O O O O O

– – – – – – –

–

Off

O O O O O O O O O O O O O O O

–

O O

Red-Eye Lamp

On/Off

O O O O O O O O O O O O O O O

–

O O

i-Contrast (=

57)

Auto

O O

– – – –

– – – – – – – – – – –

Off

–

O O O O O

–

O O O O O O O O O O O

Review image after shooting (=

43)

Display Time

Off/Quick/2 sec./4 sec./8 sec./Hold

O O O O O O O O O O O O O O O O O O

Display Info

Off

O O O O O O O O O O O O O O O O O O

Detailed

O O O O O O O O O O O O O O O O O

–

Blink Detection (=

41)

O O O O O O O

– – – –

O O O O

– – –

Off

O O O O O O O O O O O O O O O O O O

Grid Lines (=

40)

O O O O O O O O O O O O O O O O O

–

Off

O O O O O O O O O O O O O O O O O O

IS Mode (=

65)

Off/Continuous

O O O O O O O O O O O O O O O O O O

Shoot Only

–

O O O O O O O O O O O O O O O O O

Date Stamp (=

37)

Off

O O O O O O O O O O O O O O O O O O

Date / Date & Time

O O O O O O

– – – – – – – –

O O O

–

Available or set automatically.

–

Not available.

COPY

139

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

3 Set up Menu

Item Ref.Page Item Ref.Page

Mute

107

Format

109, 110

Volume

107

File Numbering

111

Hints & Tips

107

Create Folder

111

Date/Time

Units

111

Time Zone

108

Video System

115

Lens Retract

108

Wi-Fi Settings

Eco Mode

108

Certication Logo Display

111

Power Saving

25, 109

Language

LCD Brightness

109

Reset All

112

Start-up Image

109

1 Playback Menu

Item Ref.Page Item Ref.Page

Slideshow

Cropping

Erase

Resize

Protect

My Colors

Rotate

Scroll Display

Favorites

Auto Rotate

Photobook Set-up

123

Resume

i-Contrast

Transition

Red-Eye Correction

2 Print Menu

Item Ref.Page Item Ref.Page

–

Select All Images

122

Select Images & Qty.

121

Clear All Selections

122

Select Range

122

Print Settings

121

Playback Mode FUNC. Menu

Item Ref.Page Item Ref.Page

Rotate

Play Movie

Protect

Smart Shufe

Favorites

Image Search

Erase

Slideshow

121

COPY

140

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Handling Precautions

• The camera is a high-precision electronic device. Avoid dropping it or

subjecting it to strong impact.

• Never bring the camera near magnets, motors, or other devices that

generate strong electromagnetic elds, which may cause malfunction or

erase image data.

• If water droplets or dirt adheres to the camera or screen, wipe with a dry

soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.

• Never use cleaners containing organic solvents to clean the camera or

screen.

• Use a blower brush to remove dust from the lens. If cleaning is difcult,

contact a Canon Customer Support Help Desk.

• To prevent condensation from forming on the camera after sudden

temperature changes (when the camera is transferred from cold to warm

environments), put the camera in an airtight, resealable plastic bag and

let it gradually adjust to the temperature before removing it from the bag.

• If condensation does form on the camera, stop using it immediately.

Continuing to use the camera in this state may damage it. Remove the

battery and memory card, and wait until the moisture has evaporated

before resuming use.

• Before long-term battery storage, use up the battery’s remaining charge,

remove it from the camera, and store it in a plastic bag or similar

container. Storing a partially charged battery over extended periods

(about a year) may shorten its life or affect performance.

Specications

CameraEffective

Pixels(Max.)

Approx. 16 million pixels

LensFocalLength

8x zoom: 5.0 (W) – 40.0 (T) mm

(35mm lm equivalent: 28 (W) – 224 (T) mm)

LCDMonitor

ELPH 130 IS

IXUS 140

3.0 type color TFT LCD

Effective Pixels: Approx. 461,000 dots

ELPH 120 IS

IXUS 135

2.7 type color TFT LCD

Effective Pixels: Approx. 230,000 dots

FileFormat

Design rule for Camera File system, DPOF (version 1.1)

compliant

DataType

Still Images: Exif 2.3 (JPEG)

Movies: MOV (Image data: H.264; Audio data: Linear PCM

(monaural))

Interface

Hi-speed USB

Analog audio output (monaural)

Analog video output (NTSC/PAL)

Wi-FiStandards

IEEE802.11b/g/n*

* 2.4 GHz band only

Wi-FiTransmission

Methods

OFDM modulation (IEEE 802.11g/n)

DSSS modulation (IEEE 802.11b)

Wi-FiCommunication

Modes

Infrastructure mode*, Ad hoc mode

* Supports Wi-Fi Protected Setup

SupportedWi-Fi

Channels

ELPH 130 IS

ELPH 120 IS

1 – 11

IXUS 140

IXUS 135

1 – 13

Wi-FiSecurity

WEP, WPA-PSK (AES/TKIP),

WPA2-PSK (AES/TKIP)

PowerSource

Battery Pack NB-11L

AC Adapter Kit ACK-DC90

COPY

141

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

Dimensions(Based

onCIPAGuidelines)

ELPH 130 IS

IXUS 140

95.4 x 56.0 x 20.6 mm (3.76 x 2.20 x 0.81 in.)

ELPH 120 IS

IXUS 135

92.9 x 52.4 x 21.6 mm (3.66 x 2.06 x 0.85 in.)

Weight(Basedon

CIPAGuidelines)

ELPH 130 IS

IXUS 140

Approx. 133 g (approx. 4.69 oz.; including the battery and

memory card)

Approx. 117 g (approx. 4.13 oz.; camera body only)

ELPH 120 IS

IXUS 135

Approx. 134 g (approx. 4.73 oz.; including the battery and

memory card)

Approx. 118 g (approx. 4.16 oz.; camera body only)

NumberofShots/RecordingTime,PlaybackTime

ELPH 130 IS

IXUS 140

NumberofShots Approx. 190

inEcomode Approx. 260

MovieRecordingTime*

Approx. 45 minutes

ContinuousShooting*

Approx. 1 hour, 30 minutes

PlaybackTime Approx. 4 hours

ELPH 120 IS

IXUS 135

NumberofShots Approx. 200

inEcomode Approx. 275

MovieRecordingTime*

Approx. 50 minutes

ContinuousShooting

Approx. 1 hour, 35 minutes

PlaybackTime Approx. 5 hours

*1 Time under default camera settings, when normal operations are performed, such as

shooting, pausing, turning the camera on and off, and zooming.

*2 Time available when shooting the maximum movie length (until recording stops

automatically) repeatedly.

• The number of shots that can be taken is based on measurement guidelines of the

Camera & Imaging Products Association (CIPA).

• Under some shooting conditions, the number of shots and recording time may be less

than mentioned above.

• Number of shots/time with a fully charged battery.

Numberof4:3ShotsperMemoryCard

RecordingPixels

Compression

Ratio

NumberofShotsperMemoryCard

(Approx.shots)

8GB 32GB

(Large)

16M/4608x3456

1131 4567

1903 7684

(Medium 1)

8M/3264x2448

2252 9094

3721 15020

(Medium 2)

2M/1600x1200

7442 30040

12927 52176

(Small)

0.3M/640x480

27291 110150

40937 165225

• The values in the table are measured according to Canon standards and may change

depending on the subject, memory card and camera settings.

• The values in the table are based on 4:3 aspect ratio. If the aspect ratio is changed

38), more images can be shot because the data size per image will be smaller

than with 4:3 images. However, since [

] 16:9 images have a setting of 1920 x 1080

pixels, their data size will be larger than 4:3 images.

COPY

142

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

RecordingTimeperMemoryCard

ImageQuality

RecordingTimeperMemoryCard

8GB 32GB

49 min. 15 sec. 3 hr. 19 min. 00 sec.

1 hr. 28 min. 53 sec. 5 hr. 59 min. 05 sec.

• The values in the table are measured according to Canon standards and may change

depending on the subject, memory card and camera settings.

ELPH 130 IS

IXUS 140

• Recording will automatically stop when the clip le size reaches 4 GB, or when

the recording time reaches approximately 10 minutes when shooting in [

], or

approximately 1 hour when shooting in [

ELPH 120 IS

IXUS 135

• Recording will automatically stop when the clip le size reaches 4 GB, or when the

recording time reaches approximately 29 minutes and 59 seconds when shooting in

[

], or approximately 1 hour when shooting in [ ].

• Recording may stop even if the maximum clip length has not been reached on some

memory cards. SD Speed Class 4 or higher memory cards are recommended.

FlashRange

ELPH 130 IS

IXUS 140

Maximum wide angle (j)

50 cm – 3.5 m (1.6 – 11 ft.)

Maximum telephoto (i)

1.3 – 1.7 m (4.3 – 5.6 ft)

ELPH 120 IS

IXUS 135

Maximum wide angle (j)

50 cm – 3.0 m (1.6 – 9.8 ft.)

Maximum telephoto (i)

1.3 – 1.5 m (4.3 – 4.9 ft)

ShootingRange

ShootingMode FocusingRange

MaximumWide

Angle(j)

MaximumTelephoto

(i)

–

1 cm (0.4 in.) – innity 1.3 m (4.3 ft.) – innity

Other modes

5 cm (2.0 in.) – innity 1.3 m (4.3 ft.) – innity

1 cm (0.4 in.) – 50 cm

(1.6 ft.)

–

3 m (9.8 ft.) – innity

* Not available in some shooting modes.

ContinuousShootingSpeed

ShootingMode Speed

Approx. 0.8 shots/sec.

Approx. 2.9 shots/sec.

ShutterSpeed

[

] mode, automatically set range

1 – 1/2000 sec.

Aperture

f/number f/3.2 / f/9.0 (W), f/6.9 / f/20 (T)

BatteryPackNB-11L

Type: Rechargeable lithium-ion battery

Nominal Voltage: 3.6 V DC

Nominal Capacity: 680 mAh

Charging Cycles: Approx. 300 times

Operating Temperatures: 0 – 40 °C (32 – 104 °F)

Dimensions: 34.6 x 40.2 x 5.2 mm (1.36 x 1.58 x 0.20 in.)

Weight: Approx. 13 g (approx. 0.46 oz.)

COPY

143

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

Cover

AdvancedGuide

Appendix

BatteryChargerCB-2LF/CB-2LFE

Rated Input: 100 – 240 V AC (50/60 Hz)

Rated Output: 4.2 V DC, 0.41 A

Charging Time: Approx. 2 hr. (when using NB-11L)

Charge Indicator: Charging: orange / Fully charged: green

(two-indicator system)

Operating Temperatures: 5 – 40 °C (41 – 104 °F)

• All data is based on tests by Canon.

• Camera specications or appearance are subject to change without notice.

COPY

144

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

AC adapter kit ..................................... 114

Accessories ........................................114

Access point

Manual settings ............................. 98

Number of display items ................ 98

Adding target devices

Camera ......................................... 93

Computer ...................................... 96

Printer ............................................ 99

Smartphone ................................... 91

Web services ................................. 89

AE lock ................................................ 55

AF frames ............................................ 61

AF lock................................................. 63

Aspect ratio.......................................... 38

AUTO mode (shooting mode) ........ 15, 31

AV cable .............................................115

Batteries  Date/time (date/time battery)

Battery

Charging ......................................... 11

Eco mode .................................... 108

Level ............................................ 132

Power saving ................................. 25

Battery charger ...................................... 2

Black and white images ....................... 58

Blink detection ..................................... 41

Camera ............................................... 111

Adding target devices .................... 93

Nickname ...................................... 88

Reset all .......................................112

Camera access point mode ........... 91, 99

Camera shake ..................................... 65

CameraWindow

Display .......................................... 98

CANON iMAGE GATEWAY

Settings ......................................... 89

Center (AF frame mode)...................... 62

Clock.................................................... 29

Color Accent (shooting mode) ............. 49

Color Swap (shooting mode) ............... 49

Color (white balance)........................... 57

Compression ratio (image quality) ....... 65

Computer

Adding target devices .................... 96

Environment .................................. 19

Preparation .................................... 94

Connection

Web services ................................. 90

Connection information

Changing nickname .................... 105

Editing ......................................... 104

Erase ........................................... 105

Continuous shooting ............................ 59

Creative lters (shooting mode)........... 46

Cropping .............................................. 79

Custom white balance ......................... 58

Index

Date/time

Adding date stamps ...................... 37

Changing ....................................... 13

Date/time battery ........................... 14

Settings ......................................... 13

World clock .................................. 108

DC coupler..........................................116

DIGITAL CAMERA Solution Disk ........... 2

Digital tele-converter............................ 60

Digital zoom ......................................... 35

Display language ................................. 14

DPOF ................................................. 121

Drive mode .......................................... 59

Eco mode .......................................... 108

Editing

Cropping ........................................ 79

i-Contrast ....................................... 80

My Colors ...................................... 80

Red-eye correction ........................ 81

Resizing images ............................ 78

Erasing ................................................ 74

Error messages ................................. 129

Exposure

AE lock .......................................... 55

Compensation ............................... 55

FE lock .......................................... 64

Face AiAF (AF frame mode) ................ 61

Face self-timer (shooting mode) .......... 51

Favorites .............................................. 77

FE lock................................................. 64

File numbering .................................... 111

Fireworks (shooting mode) .................. 45

Fish-eye effect (shooting mode) .......... 46

Flash

Deactivating ash .......................... 37

On ................................................. 64

Slow synchro ................................. 64

Focusing

AF frames ...................................... 61

AF lock .......................................... 63

AF-point zoom ............................... 41

Servo AF ....................................... 62

Focusing range

Innity ............................................ 60

Macro ............................................ 60

Focus lock ........................................... 62

FUNC. menu

Basic operations ............................ 27

Table .................................... 135, 139

GPS ..................................................... 68

Grid lines ............................................. 40

i-Contrast ....................................... 57, 80

Image quality  Compression ratio

(image quality)

Images

Erasing .......................................... 74

Playback  Viewing

Protecting ...................................... 72

Indicator ............................................... 29

Innity (focus mode) ............................ 60

Interface cable ................................. 2, 20

COPY

145

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

ISO speed............................................ 56

Lamp.................................................... 42

Long shutter (shooting mode).............. 52

Low light (shooting mode) ................... 45

MAC address ....................................... 95

Macro (focus mode)............................. 60

Magnied display ................................. 70

Memory cards .................................. 2, 88

Recording time ............................ 142

Basic operations ............................ 28

Table ............................................ 134

Metering method.................................. 56

Miniature effect (shooting mode) ......... 47

Monochrome (shooting mode)............. 48

Movies

Editing ........................................... 81

Image quality

(resolution/frame rate) ................... 40

Recording time ............................ 142

My Colors ...................................... 58, 80

Nickname

Camera ......................................... 88

Device ......................................... 105

Package contents .................................. 2

Photobook set-up .............................. 123

PictBridge ................................... 114, 117

Playback  Viewing

Portrait (shooting mode) ...................... 45

Poster effect (shooting mode) ............. 46

Power  AC adapter kit

 Battery

Power saving ....................................... 25

Printing ...............................................117

Program AE ......................................... 55

Protecting ............................................ 72

P (shooting mode) ............................... 55

Red-eye correction ........................ 39, 81

Reset all..............................................112

Resetting Wi-Fi settings..................... 105

Resizing images .................................. 78

Resolution (image size) ....................... 39

Rotating ............................................... 76

Saving images to a computer .............. 98

Screen

Display language ........................... 14

Icons .................................... 131, 132

Menu  FUNC. menu, Menu

SD/SDHC/SDXC memory cards

 Memory cards

Searching ............................................ 69

Self-timer ............................................. 35

2-second self-timer ........................ 36

Customizing the self-timer ............. 36

Face self-timer (shooting mode) ... 51

Wink self-timer (shooting mode) ... 51

Sending images ................................. 101

Maximum number of images

that can be sent together ............ 101

Sepia tone images ............................... 58

Servo AF .............................................. 62

Shooting

Shooting date/time  Date/time

Shooting information ................... 131

Slideshow ............................................ 71

Smartphone

Adding target devices .................... 91

Changing privacy settings ............. 93

Privacy settings ............................. 92

Smart Shufe ....................................... 72

Smart Shutter (shooting mode) ........... 50

Smile (shooting mode)......................... 50

Snow (shooting mode)......................... 45

Software

DIGITAL CAMERA Solution Disk .... 2

Installation ..................................... 19

Saving images to a computer ........ 19

Sounds .............................................. 107

Stitch Assist (shooting mode) .............. 53

Strap .................................................2, 11

Super vivid (shooting mode) ................ 46

Terminal ...................................... 115, 117

Toy camera effect (shooting mode) ..... 48

Tracking AF ......................................... 61

Traveling with the camera ................. 108

Troubleshooting ................................. 126

TV display ........................................... 115

Viewing ................................................ 16

Image search ................................ 69

Index display ................................. 69

Magnied display .......................... 70

Single-image display ..................... 16

Slideshow ...................................... 71

Smart Shufe ................................ 72

TV display ....................................115

Web services

Adding target devices .................... 89

Connection .................................... 90

Display order ................................. 90

White balance (color)........................... 57

Wi-Fi .................................................... 84

Access point .................................. 95

Settings ......................................... 95

Windows

CameraWindow display ................ 98

Settings ......................................... 95

Wink self-timer (shooting mode) .......... 51

World Clock ....................................... 108

WPS

PBC Method .................................. 96

PIN Method ................................... 97

Wrist strap  Strap

Zoom ....................................... 15, 31, 35

COPY

146

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

FCC/ICNotice

Models:

ELPH 130 IS

PC1889/

ELPH 120 IS

PC1896 (including WLAN Module Model

WM218, FCC ID: AZD218)

The available scientic evidence does not show that any health problems are

associated with using low power wireless devices. There is no proof, however, that

these low power wireless devices are absolutely safe. Low power Wireless devices

emit low levels of radio frequency energy (RF) in the microwave range while being

used. Whereas high levels of RF can produce health effects (by heating tissue),

exposure to low-level RF that does not produce heating effects causes no known

adverse health effects. Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some biological effects might

occur, but such ndings have not been conrmed by additional research. This model

has been tested and found to comply with FCC/IC radiation exposure limits set forth

for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)

Exposure rules.

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of this device.

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter.

This product is installed with the WLAN Module which is certied to

standards set by IDA Singapore.

USAandCanadaonly:

The Lithium ion/polymer battery that powers the product is recyclable.

Please call 1-800-8-BATTERY for information on how to recycle this

battery.

ForCA,USAonly

Included lithium battery contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

TrademarkAcknowledgments

• The SDXC logo is a trademark of SD-3C, LLC.

• This device incorporates exFAT technology licensed from Microsoft.

• Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™

are trademarks or registered trademarks of the Wi-Fi Alliance.

AboutMPEG-4Licensing

This product is licensed under AT&T patents for the MPEG-4 standard

and may be used for encoding MPEG-4 compliant video and/or decoding

MPEG-4 compliant video that was encoded only (1) for a personal and

non-commercial purpose or (2) by a video provider licensed under the AT&T

patents to provide MPEG-4 compliant video.

No license is granted or implied for any other use for MPEG-4 standard.

COPY

147

Cover

PreliminaryNotesand

LegalInformation

Contents:

BasicOperations

AdvancedGuide

CameraBasics

SmartAuto

Mode

OtherShooting

Modes

PMode

Wi-FiFunctions

SettingMenu

Accessories

Appendix

Index

BasicGuide

PlaybackMode

FCCNotice

(Digital Camera, Model

ELPH 130 IS

PC1889/

ELPH 120 IS

PC1896 systems)

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions;

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class

B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be used with this

equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC

rules.

Do not make any changes or modications to the equipment unless otherwise

specied in the manual. If such changes or modications should be made, you could

be required to stop operation of the equipment.

Canon U.S.A., Inc.

One Canon Park, Melville, New York 11747, U.S.A.

Tel No. 1-800-OK-CANON (1-800-652-2666)

CanadianRadioInterferenceRegulations

CAN ICES-3 (B)/NMB-3 (B)

BatteryChargerCB-2LF

IMPORTANT SAFETY INSTRUCTIONS-

SAVE THESE INSTRUCTIONS.

DANGER-TO REDUCE THE RISK

OF FIRE OR ELECTRIC SHOCK,

CAREFULLY FOLLOW THESE

INSTRUCTIONS.

For connection to a supply not in the U.S.A., use an attachment plug adapter of

the proper conguration for the power outlet, if needed.

BatteryChargerCB-2LFE

The adapter can be used with a power supply between 100 and 240 V AC.

Contact your Canon dealer for information about plug adapter for overseas use.

For U.S.A. customers only: For areas where 120 V AC power is not used, you will

need a special plug adapter.

For only United States

Use a UL listed, 1.8-3m(6-10ft), Type SPT-2 or NTSPT-2, AWG no.18 power

supply cord, rated for 125V 7A, with a non-polarized NEMA 1-15P plug rated for

125V 15A

BatteryChargerCB-2LFE

In normal use, keep the LED side face-up.

Disclaimer

• Reprinting, transmitting, or storing in a retrieval system any part of

this guide without the permission of Canon is prohibited.

• Canon reserves the right to change the contents of this guide at any

time without prior notice.

• Illustrations and screenshots in this guide may differ slightly from the

actual equipment.

• The above items notwithstanding, Canon accepts no liability for

damages due to mistaken operation of the products.

COPY

Canon POWERSHOT-ELPH-130 - 16.0 MP Digital Camera

Product's Documents

User Manual

Specifications

Canon POWERSHOT-ELPH-130 Questions and Answers

Related Products

Canon POWERSHOT-SX600-HS 16MP Digital Camera

RED DIGITAL CINEMA 710-0356 KOMODO-X 6K Digital Cinema Camera Canon RF

RED DIGITAL CINEMA 710-0333 KOMODO 6K Digital Cinema Camera Canon RF

Canon EOS-80D Digital Camera

Canon ELPH 360 Digital Camera

Canon POWERSHOT G5 DIGITAL CAMERA PowerShot G Series