Loading ...
Loading ...
Loading ...
22
MAINTENANCE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and properly
tighten all parts each time the exercise bike is used.
Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild soap. IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
CONSOLE TROUBLESHOOTING
The console requires activation. If you have not
activated the console, see assembly step 14 on
page 13.
If lines appear in the console display, see HOW TO
CHANGE CONSOLE SETTINGS on page 20 and
adjust the contrast level of the display.
If the console does not display your heart rate when
you use the handgrip heart rate monitor, see step 5 on
page 17.
If a replacement power adapter is needed, call the
telephone number on the cover of this manual.
IMPORTANT: To avoid damaging the console, use
only a manufacturer-supplied regulated power
adapter.
HOW TO ADJUST THE DRIVE BELT
If the pedals slip while you are pedaling, even while the
resistance is adjusted to the highest setting, the drive
belt may need to be adjusted. Before you adjust the
drive belt, unplug the power adapter.
Next, remove the M4 x 16mm Flat Head Screw (93)
from the Front Shield Cover (9). Then, using a stan-
dard screwdriver, release the Front Shield Cover and
slide it out of the way.
Next, tighten the indicated M8 Locknut (43) slightly to
tighten the Drive Belt (not shown). Then, reattach the
Front Shield Cover (9) and plug in the power adapter.
Repeat this process, if necessary, until the pedals no
longer slip.
9
93
43
MAINTENANCE AND TROUBLESHOOTING
Loading ...
Loading ...
Loading ...