Loading ...
Loading ...
Loading ...
13
Installation instructions
Installation precautions/warnings
■■
DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
■■
WARNING – connect to potable water supply only.
■■
DO NOT install on line pressure above 119 psi (827 kPa) or below 22 psi (150 kPa).
■■
DO NOT use on hot water supply (100°F [38°C max.]).
■■
DO NOT cut any length of tube shorter than 8” (200 mm).
■■
DO NOT install near electrical wires or water pipes that will be in the path of drilling when
selecting the location of filter system.
■■
DO NOT mount filter in such a position so that it will be struck by other items, such as
wastebaskets, etc.
■■
DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure to light can
weaken plastic components.
■■
DO NOT install in a location that is susceptible to freezing temperatures as damage to the
housing could occur.
■■
DO NOT screw filter to the refrigerator.
■■
DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling cavity.
■■
AVOID contamination of pipes during installation.
■■
DO NOT use copper tubing. The plastic tubing supplied should always be used.
■■
DO NOT continuously dispense water for longer than 2 minutes.
Loading ...
Loading ...
Loading ...