Loading ...
Loading ...
Loading ...
English 31
Operations
Operations
Control panel
01
02
03 04 05 06
09
08
11
10
12
07
01 Course Selector Turn the dial to select a course.
02 Display
The display shows current course information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current course.
04 Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5.
05 Spin
Press to change the spinning speed for the current course.
• Rinse Hold
: The nal rinse cycle is suspended so that the
laundry remains in the water. To unload the laundry, run a drain
or spin cycle.
• No Spin : The drum does not spin after the nal drain cycle.
• If you wan to perform spin only, select Rinse+Spin cycle and set
the rinse times to “0” (No number is appears on the display),
then start to perform spin only.
06 Dry Level Press this button to select proper drying option.
07 Options
Press to select an option from Intensive, Prewash, and
Intensive+Prewash. Press again to deselect.
08 Prefer Mode
Press to enter custom options screen. 3 custom options are available
but multiple selection is not allowed.
WD90J7400GW_03478B-02_EN(EU).indd 31 2015/12/15 14:03:51
Loading ...
Loading ...
Loading ...