Loading ...
Loading ...
Loading ...
15
1-877-646-5288
Care & Maintenance
CLEANING AFTER A BREW
CAUTION: Make sure that the brewer is unplugged
from the power source before cleaning.
CAUTION: Be sure to allow the brewer to cool
before cleaning.
NOTE: Do not leave water in or underneath the
water reservoir unused for multiple days. Rinse and
replace with fresh water.
1 Before cleaning, close the Drip Stop.
2 After each brew is complete and the coffee grounds
have cooled, carefully remove the Premium permanent
filter and wash. If using a paper filter, simply discard.
Remove brew basket from the brewer, rinse and wash
with soap and warm water.
3 After each froth, rinse thoroughly or place the frother
whisk on top rack of dishwasher.
NOTE: The swinging brew basket is not
dishwasher safe.
NOTE: The flip-top reservoir lid is not
dishwasher safe.
NOTE: If coffee grounds spilled over into the brew
basket or in the overflow channels, remove and rinse
under water until grounds are removed.
4 Wipe machine down with a warm cloth with soap
and water to clean the base plate, shower head, the
water reservoir shelf, the water reservoir, flip-top
water reservoir lid, Premium permanent filter, and
the removable filter holder. The water reservoir,
Premium permanent filter and removable filter holder
are dishwasher safe. Do not immerse the base in
water.
HOW TO CLEAN & DESCALE THE BREWING
SYSTEM
CAUTION: Be sure to allow the brewer to cool
before cleaning.
CAUTION: DO NOT immerse the coffeemaker into
water or any other liquid.
NOTE: Cleaning is recommended before use, weekly,
and as soon as the CLEAN button illuminates. Cleaning
your Ninja
Coffee Bar
®
is recommended to keep your
brewer brewing hot, rich, and smooth coffee.
The CLEAN button will illuminate when there is a
calcium buildup on your Ninja
®
Coffee Bar that could be
affecting the flavor of your coffee. If you do not clean
your brewer when instructed to do so, the CLEAN light
will eventually begin to flash. The cleaning cycle is a two
stage process, the reservoir is first filled with cleaning
solution and later with clean water to flush the system.
To clean and descale your Ninja Coffee Bar:
1 Set the container beneath the brew basket and select
the brew size for that container.
2 Use a descaling solution and follow the directions
on the package. Fill the water reservoir up to but not
exceeding the Max Fill line (30 oz.)
OR
3 Fill the water reservoir to the cup line (11 oz.) with white
vinegar, then fill the rest of the reservoir with water up
to but not exceeding the Max Fill line (30 oz.)
IMPORTANT: Use only white vinegar.
4 Once the water reservoir is filled with your cleaning
solution and water mixture, press the CLEAN button.
(Fig. 19)
5 Your Ninja Coffee Bar will deliver water to distribute the
cleaning mixture through the system. It will pause for
15 minutes while the mixture soaks through, then the
CLEAN light will flash three times.
6 Empty the container, then set it under the brew basket
again.
7 Press the CLEAN button again. The machine will deliver
more water. At the end of each water delivery cycle,
your Ninja Coffee Bar will beep and the CLEAN light
will flash three times to indicate that the water delivery
cycle is over.
Loading ...
Loading ...
Loading ...