Loading ...
Loading ...
Loading ...
9
A
A. Foam pad strips
Installing Pad Strips
Take the 2 foam pad strips from bag.1.
Remove tape from the back of adhesive pads.2.
Install the pads on the left and right inside walls of the coin 3.
vault, leaving about 1/4" to 1/2" of space near the front
edge of the vault to allow room for the coin box to lock into
position.
Complete Installation
Check the electrical requirements. Be sure that you have the 1.
correct electrical supply and the recommended grounding
method. See “Electrical Requirements.”
Check that all parts are now installed. If there is an extra 2.
part, go back through the steps to see which step was
skipped.
Check that you have all of your tools.3.
Dispose of/recycle all packaging materials.4.
Check that the water faucets are on.5.
Check for leaks around faucets and inlet hoses.6.
Plug into a grounded 3 prong outlet.7.
To test and to clean your washer, measure 1/2 the detergent 8.
manufacturer’s recommended amount of “HE” High
Efciency detergent for a medium-size load. Pour the
detergent into the detergent dispenser. Select any cycle and
allow the washer to complete one whole cycle.
Use only HE detergent.
Loading ...
Loading ...
Loading ...