Loading ...
Loading ...
Loading ...
11
Start Operating Set-up
NOTE: Prior to operation, a payment system or an OPL kit must
be installed.
Before proceeding, it is worth noting that, despite all of the
options available, an owner can simply choose to uncrate a new
commercial washer, hook it up, plug it in, and have a washer that
operates. Washers are preset at the factory for a 11-minute wash
period and 3 rinses (no extra rinse).
SET-UP CODES
The WARM button will advance you from code to code.
The HOT button will change the code value.
The COLD button will select or deselect options.
NOTE: The set-up codes are the same for all models except
where noted.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two or
three right-hand characters.
CODE EXPLANATION
6 07 REGULAR CYCLE PRICE
6
6
07
01
g
When the d.xx is set to d.00, this 6 xx value
represents the number of quarters (coin 1)
needed to start the washer; may adjust from 0-39.
Change this value by pressing the HOT button.
6 07 = 7 quarters = $1.75.
When the d.xx code is set to d.CS this 6 xx code
then represents the number of push-in actuations
of the coin slide to start the washer. 6 01 would
equal one coin slide activation.
Press the WARM button once to advance
to next code.
8 00 ADDITIONAL RINSE OPTION
This option is either SELECTED = ‘ON’ or NOT
SELECTED = ‘OFF’.
8
8
00
Ar
g
NOT SELECTED = ‘OFF’.
SELECTED = ‘ON’.
Press the COLD button once to change this
selection.
Press the WARM button once to advance
to next code.
9 00 CYCLE COUNTER OPTION
This option is either SELECTED = ‘ON’ or NOT
SELECTED = ‘OFF’.
9
9
00
0C
g
NOT SELECTED = ‘OFF’.
SELECTED = ‘ON’ and not able to be deselected.
Press the COLD button 3 consecutive times to
SELECTED = ‘ON’. Once SELECTED = ‘ON’ it
cannot be deselected.
Press the WARM button once to advance
to next code.
CODE EXPLANATION
1. 00 MONEY COUNTER OPTION
This option is either SELECTED = ‘ON’ or NOT
SELECTED = ‘OFF’.
1.
1.
1.
00
0C
g
C0
NOT SELECTED = ‘OFF’.
SELECTED = ‘ON’.
Press the COLD button 3 consecutive times to
select ‘ON’ and 3 consecutive times to remove
(NOT SELECTED = ‘OFF’.) Counter resets by
going from ‘OFF’ to ‘ON’.
Press the WARM button once to advance
to next code.
SELECTED = ‘ON’ and not able to be deselected.
To SELECT = ‘ON’ and not able to be deselected,
rst SELECT = ‘ON’, then within 2 seconds press
the COLD button twice, HOT button once, and exit
the set-up mode.
2. 00 SPECIAL PRICING OPTIONS
This option is either SELECTED = ‘ON’ or NOT
SELECTED = ‘OFF’.
2.
2.
00
SP
NOT SELECTED = ‘OFF’.
SELECTED = ‘ON’. Press the COLD button once
for this selection.
If SPECIAL PRICING OPTION is selected, you have access
to codes ‘3.XX’ through ‘9.XX’.
g Press the WARM button once to advance to next
code.
Options to use if SPECIAL PRICING is selected:
3. 07 SPECIAL CYCLE PRICE
3.
3.
07
01
g
When the d.xx is set to d.00, this 3.xx value
represents the number of quarters (coin 1)
needed to start the washer; may adjust from 0-39.
Change this value by pressing the HOT button.
3.07 = 7 quarters = $1.75.
When the d.xx code is set to d.CS this 3.xx code
then represents the number of push-in actuations
of the coin slide to start the washer. 3.01 would
equal one coin slide actuation.
Press the WARM button once to advance
to next code.
5. 00 TIME-OF-DAY CLOCK, MINUTES
5. 00
g
This is the TIME-OF-DAY CLOCK, minute setting;
select 0-59 minutes by pressing the HOT button.
Press the WARM button once to advance
to next code.
6. 00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock
6. 00
g
This is the TIME-OF-DAY CLOCK, hour setting;
select 0-23 hours by pressing the HOT button.
Press the WARM button once to advance
to next code.
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock
7. 00
g
This is the start hour; 0-23 hours. Select START
HOUR by pressing the HOT button.
Press the WARM button once to advance
to next code.
Loading ...
Loading ...
Loading ...