Loading ...
Loading ...
Loading ...
ATTACHING THE COOKTOP
To prevent liquids from leaking accidentally into the underlying
storage space, the appliance is equipped with a special gasket.
To apply this gasket, carefully follow the instructions in Fig. 3. Lay out
the protective sealing strips along the edges of the opening in the
countertop and carefully overlap the strip end. (See Fig. 3). Insert the
cooktop into the countertop opening. With a screwdriver assemble
the brackets A to the cooktop bottom by means of the screws B.
(See Fig. 4). Slide the hooks into position and secure them with the
screws.Trim the part of the sealing strips which extend beyond the
hotplate base
GAS CONNECTION
Before connecting the appliance to the gas supply, first remove the
plastic plug on which is press- fitted into the gas inlet union; to
remove, just pull it off.
1. Check the ‘gas type’ sticker attached to the cooktop. Details of the
injector sizes used are recorded on the data plate located on the
base of the appliance.
2. This appliance shall be installed in accordance with installation
requirements of the local gas authority of the appropriate
installation code.
3. Before installing the cooktop consider the location of the gas
supply and routing the gas line.(Refer fig.6)
4. For LPG models: the gas supply is connected to the regulator
which is supplied loose. The inlet connection has a 1/2” B.S.P.
male thread. IT IS ESSENTIAL THAT THE ELBOW ON THE
APPLIANCE BE HELD FIRMLY WITH A SPANNER WHEN
CONNECTING THE SUPPLY. DO NOT OVER TIGHTEN.
The regulated pressure For LPG is 10” w.c. (See Fig. 5).
INSTALLATION GUIDE
6
Loading ...
Loading ...
Loading ...