Loading ...
Loading ...
Loading ...
8. Remove the jack and fully tighten the lug
nuts in the order shown. Refer to Wheel lug
nut torque specifications later in this
chapter for the proper lug nut torque
specification.
Stowing the spare and jack (utility)
1. Replace the wheel chock in the foam tray.
2. Adjust the jack to the proper
height to install the wrench. Turn
the jack lead screw until the arrow
on the upper link is slightly below
the circle indicator shown on the
lower link.
Push the button (A) to retract the
wrench handle and place the
wrench over the raised tab on the
lower link and drop the tang (B)
through the hole in the diagonally
opposite upper link. Turn lead screw
of jack clockwise until the arrow
aligns with the circle indicator to
secure the wrench onto the jack.
A
B
288 Wheels and Tires
2013 Police (pol)
Owners Guide gf, 1st Printing
USA (fus)
Loading ...
Loading ...
Loading ...