Loading ...
Loading ...
Loading ...
16
CD-DP900S(E)2.fm03/11/28
CD-DP900S
TINSEA032AWZZ
CD Playback
- Listening to a CD (CDs) -
Listening to a CD (CDs)
This system can also play audio CD-R and CD-RW discs, but cannot record.
Some audio CD-R and CD-RW discs may not be playable due to the state of disc or
the device that was used for recording.
To interrupt playback:
Press the CD button on the remote control.
To resume playback from the same point, press the button.
To stop playback:
Press the (CD ) button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the CD in the open position.
! CDs can be placed on any open position on the disc tray.
! Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
12 cm (5") 8 cm (3")
5
Press the OPEN/CLOSE button to close the disc tray.
Total number of tracks on the CD
whose number is flashing
Total playing time of the CD whose
number is flashing
6
To select the CD you want to listen to first, press the DISC SKIP
button.
7 Press the / ( ) button to start playback.
! Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
! When the last track on the third disc has finished playing, the CD player will
stop automatically.
! When there is no CD in one of the disc 1 - 3 positions, that position will be
skipped and the next CD will be played.
Sound control (See page 14.)
Downloaded from: http://www.usersmanualguide.com/
Loading ...
Loading ...
Loading ...