Loading ...
Loading ...
Loading ...
12
CONNECT THE INLET PIPE
Connect the inlet pipe as indicated in the figure.
For the model which has hot valve , please
connect the hot vale to hot water tap. Energy will
decrease automatically for some program.
INSTALL INLET PIPE
1. Connect the elbow to tap and fasten it
clockwise.
2. Connect the other end of inlet pipe to
the inlet valve at the backside of washing
machine and fasten the pipe tightly
clockwise.
Notes: If there is any leakage with hose after connecting, then repeat the steps to
connect inlet pipe. The most common type of tap shall be used to supply water. If
the tap is square or too big, then the tap should be changed to a standard one.
PLACE OUTLET HOSE
There is 1 way to place the end of outlet hose:
• Put it beside the water trough.
HOLE PLUG
This Hole plug is used to jam the hole on the
back cabinet.
GETTING STARTED (Cont.)
CONNECTING THE WATER INLET HOSE
IMPORTANT! To prevent leakage or water damage please follow the below
instructions. Do not kink, crush, modify or sever the water inlet hose.
Minimum Inlet Water Pressure: 0.05MPa/Maximum Inlet Water Pressure: 1MPa
Be sure to only use new hose sets when connecting the washing machine. Do not re-use
old hoses.
Loading ...
Loading ...
Loading ...