Loading ...
Loading ...
Loading ...
23
10
Reverse the lower hinge bracket and hinge
assembly.
a. Remove 1 screw from the lower hinge bracket (on
the right) and lift it out. Remove 2 screws from the
lower hinge assembly (on the left) and lift it out.
b. Rotate the lower hinge assembly 180 degrees
and install it on the right side using the 2 screws
removed in step a.
c. Mount the lower hinge bracket on the lower left
with the screw removed in step a.
11
Install the side lock rod.
a. Flip the side lock rod over and insert the lower
end into the left hinge bracket.
b. Lower the rod into the guides on the door while
compressing the spring inside the recess.
NOTE:
• Make sure the top of the side lock rod is beside
the top lock rod and the two do not overlap each
other. If they are not aligned properly, the door
will not operate properly.
• Make sure the spring stays on the side lock rod.
12
Reinstall the side interlock button.
Install the side interlock button on the opposite side
from which it was removed.
NOTE:
M
ake sure the spring is on the interlock button and is
centered in the compartment.
13
Reinstall the door cover.
a. Clean the class on the door and door cover, if
necessary.
b. Make sure the 3 gray interlock buttons are
properly installed and that the top and side lock
rods intersect properly.
REVERSING THE DOOR SWING (continued)
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...