Loading ...
Loading ...
Loading ...
61
ENGLISH
91. Luminance Value Read (Command: m u)
Reads luminance value.
Transmission
[m][u][ ][Set ID][ ][FF][Cr]
Acknowledgement
[u][][SetID][][OK/NG][Data1][Data2][Data3]
[Data4][Data5][Data6][Data7][x]
Data1 00–64: The Backlight PWM value (0 to 100)
Data2 00–ff: The upper 1-byte of the value measured by
the CA210.
Data3 00–ff: The lower 1-byte of the value measured by
the CA210.
CA210 measurement: 0000 to ffff in hexadecimal and 0 to
65535 in decimal.
Data4 00–ff: The upper 1-byte of the value measured by
BLU 1 sensor.
Data5 00–ff: The lower 1-byte of the value measured by
BLU 1 sensor.
Data6 00–ff: The upper 1-byte of the value measured by
BLU 2 sensor.
Data7 00–ff: The lower 1-byte of the value measured by
BLU 2 sensor.
BLU measurement: 0000 to ffff in hexadecimal and 0 to 65535
in decimal.
* During final assembly, a CA210 measurement is entered
through the calibration procedure. The default value, before
calibration, is 0.
** This may not be supported on some models.
92. BLU Maintenance (Command: m t)
Selects whether to turn on/off BLU Maintenance.
Transmission
[m][t][ ][Set ID][ ][Data][Cr]
Data 00: BLU Maintenance Off
01: BLU Maintenance On
** This may not be supported on some models.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
93. Power Indicator (Command: f o)
Sets the Power Indicator Settings.
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** This may not be supported on some models.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
94. OSD Display (Command: k l)
Selects the desired OSD Display option.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: No (Off)
01: Yes (On)
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported for certain models.
95. Semi-Transparent Brightness (Command: s n, 95)
Controls semi-transparent mode LED brightness.
Transmission
[s][n][ ][Set ID][ ][9][5][ ][Data][Cr]
Data 00 to 64: LED brightness 0 to 100
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][5][Data][x]
* This feature may not be supported for some models.
Loading ...
Loading ...
Loading ...