Loading ...
Loading ...
Loading ...
6
Settings and Functions
I n order for your new refrigerator to work properly, it is important that you
understand its various features, controls, and how to use them.
Power On/O Switch
Your unit is shipped with the power switch on. When rst plugged in, the
display will ash. Push any button to initiate display.
The power on/o switch is located to the left of the center behind the
header panel. It is used to turn the power o when cleaning or servicing
the refrigerator.
To turn the power o , remove the header panel by using a small at head
screwdriver to pry between the breaker frame and the header panel on
the side closest to the hinge (see drawing A). There is a small pocket cut
into the bottom of the header panel at that location for that purpose.
Once you have pulled the header panel away from the unit (drawing B)
enough to get your ngers behind it slowly pull the opposite side away
from the unit.
NOTE: There are wires connected to the backside of the header panel for
the Viking light and the WiFi board on the back of the light.
To turn power on, press power on/o switch to the on position. Replace
header panel. IMPORTANT: Be sure the power on/o switch is in the on
position after cleaning or servicing.
Temperature Change Button. When you rst plug your new refrigerator in, you will nd that the refrigerator is factory set at 39° F
in the refrigerator and 0° F in the freezer. Wait 24 hours after plug-in for the cabinets to reach this setting. After 24 hours, you may
adjust controls as desired. To change from °F to °C, press the “°F/ °C” button, To change back, press the °F/ °C button again.
Sabbath mode is used to disable interior lights and alarms for observance of the Sabbath. To enter Sabbath mode, press the
”SAB” button. Button will illuminate blue to indicate “SAB” mode is active. When your refrigerator is in Sabbath mode, interior
lights, display (excluding SAB indicator, temperature, and compartment indicator), and alarms are disabled. The “SAB” button
will illuminate blue. If your refrigerator loses power while in Sabbath mode, it will return to the Sabbath mode when power is
reestablished. To exit the Sabbath mode, press the ”SAB” button.
VRI/FRI/MVRI Models only
Max refrigerator mode adjusts the refrigerator temperature to the coldest setting for four hours, at the end of which the
refrigerator’s temperature automatically returns to its previous setting. To activate the max refrigerator mode, simply press the
“MAX REF” button. The “MAX REF” light will glow to let you know you’ve turned on the max refrigerator mode. To deactivate the
max refrigerator mode before the end of the four hour cycle, press the “MAX REF” button and the blue illumination will go out.
Vacation mode will optimize refrigerator energy consumption during periods of non-use. Press the “VAC” button to activate. Press
again to return refrigerator to normal operation.
(Select Models only) Viking Range, LLC Connect App enables connectivity from a mobile phone to monitor temperatures, settings,
and allows for various alerts to be sent to the phone. If the NIC Enabled is set to on, the icon will illuminate blue. If not enabled,
the icon will remain white.
Enabling the lock feature will prevent the use of any other keypad operation. When the lock is enabled, the lock
keypad will illuminate blue. The enabled status of the lock is not retained after power loss. To disable the lock feature
press the lock keypad again. When the lock is disabled, the icon will illuminate white.
A
B
Power Switch
Loading ...
Loading ...
Loading ...