Loading ...
Loading ...
Loading ...
About the temperature controls.
4
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and
0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset
recommended settings.
The temperature controls can display both the SET temperature as well as the actual temperature
in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature
based on usage and operating environment.
On some models, setting both controls to the warmest setting until the display flashes (off) will
stop cooling in both the freezer and refrigerator compartments.
On other models, setting either control to the warmest setting until the display flashes (off) will
stop the cooling to the freezer and refrigerator.
NOTE: Turning the refrigerator off via the controls on the touch panel does not shut off electrical
power to the refrigerator.
NOTE: The refrigerator is shipped with protective film- covering the temperature controls. If this film
was not removed during installation, remove it now.
Not all features are on all models. Your controls may be similar to the following:
The Performance Air-Flow System is designed
to maximize temperature control in the
refrigerator and freezer compartments. This
unique special feature consists of the Air
Tower along the back wall of the refrigerator
and the Air Tunnel on the bottom portion of
the freezer rear wall.
Placing food in front of the louvers on these
components will not affect performance.
Although the Air Tower and the Air Tunnel can
be removed, doing so will affect temperature
performance. (For removal instructions,
on-line, 24 hours a day, contact us at
GEAppliances.com or call 800.GE.CARES. In
Canada, contact us at geappliances.ca or call
1.800.561.3344.)
Performance Air Flow System
OR
Loading ...
Loading ...
Loading ...