Loading ...
Loading ...
Loading ...
17
Replacing the lights on models with LED lighting
Setting the controls to OFF does not remove power to the light circuit. Not all features are on all models.
Refrigerator Compartment (on some models)
There is an LED lighting display in the top and sides of the fresh food compartment and in the rear
and side of the freezer compartment on some models.
If this assembly needs to be replaced, call GE Appliances Service at 1.800.432.2737 in the United
States or 1.800.561.3344 in Canada.
LED
Lighting
Display
5HIULJHUDWRU&RPSDUWPHQW³/RZHU/LJKW
This light is located above the top drawer.
Unplug the refrigerator.
Lift the light shield up and pull it out.
After replacing the bulb with an appliance
bulb of the same or lower wattage, replace
the shield.
Plug the refrigerator back in.
Freezer Compartment
Unplug the refrigerator.
Remove the shelf just above the light shield.
(The shelf will be easier to remove if it is
emptied first.) Remove the screw at the top
of the light shield.
To remove the light shield, press in on the
sides, and lift up and out.
Replace the bulb with an appliance bulb
of the same or lower wattage, and
reinstall the light shield. When reinstalling
the light shield, make sure the top tabs
snap securely into place. Replace the
screw.
Reinstall the shelf and plug the
refrigerator back in.
Dispenser (on some models)
Unplug the refrigerator.
The bulb is located on the dispenser under
the control panel. Remove the light bulb by
turning it counterclockwise.
Replace the bulb with a bulb of the same
size and wattage.
Plug the refrigerator back in.
Replacing the light bulbs. (cont) GEAppliances.com
WARNING
Before replacing a burned-out light bulb, the refrigerator should be unplugged in order to avoid contact with a
live wire filament. (A burned-out light bulb may break when being replaced.)
Turning the control to the OFF position does not remove power to the light circuit.
Loading ...
Loading ...
Loading ...