Loading ...
Loading ...
Loading ...
40
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
• Set to PC when connected to a PC.
• Set to AV when connected to an AV device.
―
This feature is only available on the widescreen models that include 16:9, 16:10 and 21:9.
―
If the monitor is in HDMI ,DisplayPort or Thunderbolt3 / USB-C mode and the screen says Check Signal Cable
or power saving mode activates, press the JOG button to display the function-button screen and then select
the
icon. You can select PC or AV.
Source Detection
Select either Auto or Manual as the method to recognize input signal.
―
Not available when PIP/PBP Mode is set to On.
USB Hub
Set whether to use the USB hub or not.
• Off: USB Hub can't be available.
• On: USB Hub can be available.
―
Actual models because of functional variation maybe haven’t this function.
―
Please make sure to connect with the only one thunderbolt device when changing USB Hub condition.
Key Repeat Time
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once
when a button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
Information
View the current input source, frequency and resolution.
Loading ...
Loading ...
Loading ...