Loading ...
Loading ...
Loading ...
30
——————
——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
3
b
Start sawing.
• For details, refer to “Starting sewing”
(Page 23).
Memo
● When sewing with a zigzag stitch, use
straight stitches at the beginning and end of
the zigzag stitch for reinforcement.
c
When sewing is finished, cut the thread.
• For details, refer to “Starting sewing”
(Page 23).
CAUTION
■ Satin stitch
When the stitch length is set in the area noted with
an F and the stitch width is set greater than 0.5, it
produces a Satin Stitch (a close zigzag stitch). The
Satin Stitch can be used for making buttonholes and
decorative stitches or edging.
Note
● It is recommended that a test sample be
made on a fabric scrap before sewing on
your project.
Blind hem stitching
Memo
● When the size of cylindrical pieces is too
small to slide onto the arm or the length is
too short, the fabric will not feed and
desired results may not be achieved.
a
Reverse the skirt or pants.
1 Wrong side of fabric
2 Right side of fabric
3 Bottom side
4 Edge of fabric
b
Fold the fabric along the desired edge of
the hem, and press.
●
Slowly turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the needle
may bend or break.
Needle
Available stitch width ( )
Available
stitch
length
Single See the instructions below.
See the
instructions
below.
1 Wrong side of
fabric
2 Right side of
fabric
3 Edge of fabric
4 Desired edge of
hem
<Thick fabric>
<Normal fabric>
<Seen from the side>
2
1
3
4
1
2
1
2
1
3
3
4
2
Loading ...
Loading ...
Loading ...