Loading ...
Loading ...
Loading ...
18
CARE AND CLEANING
Container:
To prepare your new machine for initial use, follow the steps below. This will clean
the unit and break in the motor.
Normal Cleaning:
Always start the machine with the left switch down in the Variable ( ) position
and with the centre Variable-Speed Dial on 1.
1. Fill the container half full of warm water and add a few drops of washing-up
liquid to the container.
2. Snap or push the complete 2-Part lid into locked position.
3. Select Variable-Speed 1. Turn on the machine and slowly increase speed to
Variable-Speed 10, then to High.
4. Run the machine on High Speed for 30 to 60 seconds.
5. Turn off the machine, and rinse and drain the container.
To Sanitise:
Always start the machine with the left switch down in the Variable ( ) position
and with the centre Variable-Speed Dial on 1.
1. Follow the cleaning instructions above.
2. Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into the locked position.
4. Select Variable-Speed 1. Turn on the machine and slowly increase speed to
Variable-Speed 10, then to High.
5. Run the machine on High Speed for 30 to 60 seconds.
6. Allow the mixture to stand in the container for an additional 1 ½ minutes.
7. Pour out bleach mixture. Allow container to air dry.
8. Do not rinse after sanitising.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash parts in warm, soapy water. Rinse clean under
running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the
container, lid, lid plug or tamper in the dishwasher.
Loading ...
Loading ...
Loading ...