Loading ...
Loading ...
Loading ...
23
Oven Controls
Setting Self Clean
To set Select Clean to start immediately:
1. Be sure the oven in empty and all oven racks are removed.
Remove all items from the cooktop. Be sure the oven door is
completely closed.
2. Press Self Clean. The display shows
3:00.
3. To change to a 2-hour clean time press until 2:00
appears in the display. To select a 4-hour clean time press
until 4:00 appears in the display.
4. After selecting the clean time release the Arrow key for the
oven control to activate the self clean. The DOOR LOCKED
indicator light illuminates and CLn appears in the display.
5. When Self Clean cycle begins, the motorized door latch
mechanism automatically starts to lock the oven door and
the DOOR LOCKED indicator light flashes. Do not open the
oven door when the DOOR LOCKED indicator light is
flashing. Allow about 15 seconds for the oven door to
completely lock.
Once the oven door is locked the DOOR LOCKED indicator
light will glow steadily. When CLn will appears in the display
Self Clean is active.
Use caution when opening the oven door after
self cleaning. The oven bake and broil elements may still be very
hot and can cause burns. To avoid possible burns stand to the
side of the oven when opening the oven door to allow hot air or
steam to escape.
When Self Clean is finished:
1. The time of day will appear in the display window and the
and the DOOR LOCKED indicator light will continue to
glow.
2. Once the oven has cooled down (about 1 hour) and the
DOOR LOCKED indicator light has turned off the oven door
may be opened.
3. When the oven interior has completely cooled, wipe away
any residue or powdered ash with a damp cloth or paper
towel.
Delayed Start Self Clean
To start Delay Start Self Clean:
1. Be sure the oven is empty and all oven racks are removed.
Remove all items from the cooktop. Be sure oven door is
completely closed.
2. Be sure the clock shows the correct time of day.
3. Press Delay Start.
4. Press and hold to scroll to the time desired to start
the self clean cycle. and release arrow key when the
desired start time is displayed.
5. Press Self Clean. The display shows 3:00.
6. Release the arrow key if a 3-hour clean is desired. To select
a 2-hour clean time press ; 2:00 appears in the dis-
play. To select a 4-hour clean time press ; 4:00
appears in the display.
7. After selecting the desired clean time release the Arrow key.
Self Clean is set to activate. The DOOR LOCKED indicator
light will turn on and the oven door will lock in advance of
the starting time. Once the starting time is reached CLn will
appear in the display.
If it becomes necessary to stop Self Clean when active:
1. Press .
2. If Self Clean has heated the oven to a high enough temper-
ature, allow time for the oven to cool and for the DOOR
LOCKED indicator light to turn off. When this indicator light
turns off the oven door may be opened.
3. Restart Self Clean if needed.
Important notes:
If Self Clean is active and a power failure occurs, the oven may
not have thoroughly cleaned. This would depend on how much
cleaning time had elapsed before the power failure. If needed
after power is restored, set Self Clean again.
The oven bake and broil elements may appear
to have cooled after they have been turned off. The elements
may still be hot and burns may occur if these elements are
touched before they have cooled.
Do not force the oven door open when
self-clean is active. This can damage the automatic door-
locking system. Use caution when opening the door after self-
clean cycle is complete; the oven may still be very hot.
STOPSTOP
Loading ...
Loading ...
Loading ...