Installation Manual - Page 14

For DWT81900SS. Also, The document are for others Blomberg models: DW 51600 SS, DW 51600 FBI, DWT 51600 SS, DWT 51600 FBI, DWT 81800 FBI, DWT 81800 SS, DWT 81800 SSIH, DWT 81800 SSWS, DWT 52600 WIH, DWT 52600 SSIH, DWT 52600 BIH, DWT 52800 WIH, DWT 52800 SSIH DWT 81900 FBI, DWT 51600 W

Loading ...
Loading ...
Loading ...
11
USA
NOTICE :
Either one of the above methods must be used or the dishwasher will not operate
properly.
A hose that attaches to a sink spray can burst if it is installed on the same water line as
the dishwasher. If your sink has one, it is recommended that the hose be disconnected
and the hole plugged.
The total length of the drain hose is 763/4” (1950mm). If a hose extension is required, a
drainage hose of equal quality must be used.
The maximum length must not exceed 157 ½” (4000mm). Otherwise, the cleaning
process is negatively inuenced.
6.6.1 UNDER THE SINK DRAIN
Install a Y-branch tail pipe. (Figure A)
NOTICE :
You must add a loop at least 28” (710mm) above the oor of
the cabinet and above the drain connection in the drain hose
to prevent waste water from not draining properly, and causing
either poor washing results or a bad odor.
6.6.2 INSTALLING AN AIR GAP
If the local ordinance requires an air gap (Figure B).
NOTICE :
Check with local ordinance for type of air gap required.
6.6.3 DISPOSAL
Remove the drain connection plug before attaching the drain
hose from the dishwasher.
Every disposal has a hook up for a dishwasher; consult your
disposer manual for correct connection. (Figure C)
Loading ...
Loading ...
Loading ...