Loading ...
Loading ...
Loading ...
10
USA
6.5 PREPARING THE WATER CONNECTION (A)
Install an easily accessible shut-off valve (not supplied) in the water supply line. All solder
connections must be made before the water line is connected to the dishwasher’s water
inlet valve. Water can also be supplied to the dishwasher by using a exible braided hose
line.
Check with your plumbing supply sources for the proper hose and elbow and necessary
ttings for the water supply line. This material is not supplied, and must be purchased
separately.
WARNING
Installation should be performed by a qualied installer. Work by unqualied
persons could be dangerous and may void the warranty.
If the dishwasher is installed in a location that experiences freezing temperatures
(e.g. in a vacation home, cabin etc.), you must drain all the water from the
dishwasher’s interior. Water system ruptures that occur as a result of freezing are
not covered by warranty.
6.6 DRAIN PREPARATION
The dishwasher drain hose may be connected to the drain plumbing in one of three ways
(Figure A, B, C).
Water Connection
Loading ...
Loading ...
Loading ...