Loading ...
Loading ...
Loading ...
3 Put the battery in the battery compartment.
Make sure the + and - poles of the battery point in the right direction.
Note: The appliance runs on one R6 AA 1.5-volt battery (included). Preferably
use Philips alkaline batteries. A new AA alkaline battery has an operating time
of up to 2 hours.
4 Slide the battery compartment cover back onto the handle.
5 Turn the battery compartment cover anticlockwise until the setting
indicator ( %) points to the ‘off’ indication (0).
To avoid damage due to battery leakage:
do not expose the appliance to direct sunlight.
do not expose the appliance to temperatures higher than 35°C.
remove the battery if you are not going to use the appliance for a
month or more.
do not leave an empty battery in the appliance.

Note: The precision trimming head and precision shaving head can be attached
and detached in the same way.
1 To attach one of the attachments, align the locking indicator with
the ‘unlocked’ indication (black upward arrowhead) and put the
attachment on the handle. Then turn the attachment clockwise until
the locking indicator points to the ‘locked’ indication (I).
2 To detach the attachment turn it anticlockwise until the locking
indicator points to the ‘unlocked’ indication (black upward
arrowhead). Then pull the attachment off the handle.
-
-
-
-
AAAA
ENGLISH8
Using the appliance
When you trim your beard for the rst time, be careful and test the
appliance on a small part of your arm or leg. Do not move the trimmer
too fast. Make smooth and gentle movements.
If any irritation or allergic reaction occurs, discontinue use immediately.
Do no use the appliance on sensitive or irritated skin.
Trimming with the precision trimming head
With the precision trimming head without precision trimming comb, you
can trim hairs to a length of 1mm, the so-called ‘stubble look’.
1 Put the precision trimming head on the appliance (see section
‘Attaching and detaching the attachments’ in chapter ‘Preparing for
use’).
2 Switch on the appliance. Turn the battery compartment cover from
the ‘off’ position (0) to the ‘on’ position (I).
3 Touch the hairs lightly with the precision trimming head and move it
against the direction of hair growth.
Note: You can use the precision trimming head with the trimmer teeth pointing
towards the skin. You can also use it with the at part touching the skin and
the teeth pointing in the direction in which you move the appliance.
4 To switch off the appliance, turn the battery compartment to the ‘off
indication (0).
ENGLISH 9
Loading ...
Loading ...
Loading ...