Loading ...
Loading ...
Loading ...
16
Automatic Icemaker
Stainless Steel Refrigerator
Automatic
icemaker
The icemaker will produce seven cubes
per cycle—approximately 100–130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other use
conditions.
If the refrigerator is operated before the water
connection is made to the icemaker, set the
power switch in the
O
(off) position.
When the refrigerator has been connected
to the water supply, set the power switch to
the
l
(on) position.
The icemaker will fill with water when it
cools to 15°F (–10°C). A newly-installed
refrigerator may take 12 to 24 hours to begin
making ice cubes.
Throw away the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep
of the feeler arm.
When the bin fills to the level of the feeler
arm, the icemaker will stop producing ice. It is
normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
If ice cubes get stuck in the icemaker, the green
power light will blink. To correct this, set the
power switch to
O
(off) and remove the cubes.
Set the power switch to
l
(on) to restart the
icemaker. After the icemaker has been turned
on again, there will be a delay of about
45 minutes before the icemaker resumes
operation.
NOTE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle multiple
times when making one batch of ice.
A newly-installed refrigerator may take 12 to 24 hours to begin making ice.
Pull the upper freezer shelf
straight out to access the
icemaker. Always be sure to
replace the shelf. The shelf
can be used for storage.
Icemaker
Feeler Arm
Power
Switch
Green Power
Light
Ice Drawer
Shelf
Ice storage
drawer
To access ice, pull the drawer forward.
To remove the drawer, pull it straight out and
lift it past the stop location.
Ice Drawer
Loading ...
Loading ...
Loading ...