Loading ...
Loading ...
Loading ...
Problem Possible causes Solution
Dishwasher doesn't
start
Power supply or power
line is not connected
Delay Start option has
been selected
Dishwasher won't start
Child Lock activated
(selected models)
Deactivate the child lock, refer to child
lock section in this manual
Check and connect the power supply
Shut the door completely make sure it is
latched
Refer to Delay Start section in this manual
to reset
Detergent dispenser is
empty
Improper loading of
dishes
The cycle you chose did
not included the drying
Fill rinse aid dispenser or increase the
amount of rinse aid.
Load the dishes again as the manual
instructs.
Choose the proper cycle with drying
Dishes not drying
enough
Water hardness is too
high
Improper loading of
dishes
Old rinse aid is used
Rinse dispenser empty
For extremely hard water install a water
softener
Load the dishes again as the manual
indicates
Use fresh rinse aid
Add rinse aid to the dispenser
Spots and filming
on dishes
Using too much
detergent
Use less detergent if you have soft water
Lower the inlet water temperatureThe inlet water
temperature exceeds
158℉
Detergent dispenser
will not shut
Improper operation of
the detergent cover
Add the detergent and rinse aid as
indicated by the manual
Water remains in the
dishwasher
Previous cycle has not
finished or has been
interrupted
Select the proper cycle explained in the
manual
Dishwasher does not
drain properly
Drain is clogged
Check the air gap if you have one. Make
sure the disposer is empty if the dishwasher
is connected to the disposer
Drain hose is kinked Make sure the drain hose is properly
connected to the sink
Suds in the tub Improper detergent is
used
Make sure to use only the automatic
dishwasher detergent
Detergent may be
too old
Spray arm is blocked
Use fresh detergent
Load the dishes, making sure the spray
arms are not blocked
Detergent left in
dispenser cup
25
Loading ...
Loading ...
Loading ...