Loading ...
Loading ...
Loading ...
TROUBLESHOOTING TIPS
Before Calling For Service
Reviewing the charts on the following pages may save you from calling for service.
Problem Possible causes Solution
Dishwasher doesn't
start
Power supply or power
line is not connected
Delay Start option has
been selected
Dishwasher won't start
Child Lock activated
(selected models)
Deactivate the child lock, refer to child
lock section in this manual
Check and connect the power supply
Shut the door completely make sure it is
latched
Refer to Delay Start section in this manual
to reset
Dishwasher beeps at
the end of the cycle
It indicates the wash
cycle finished, the
dishwasher will beep
Rinse Aid light on
LED screen shows “Lsb”
Add rinse aid
The dishwasher is
connected to cold water
The cycle time will vary
due to the soil
The sanitize option is
selected
Check the dishwasher, make sure it is
properly connected to the hot water supply
When heavy soil is detected, the auto,
normal, pots & pan cycle will automatically
increase the cycle time
When sanitize option is selected, the cycle
time will be increase to meet the sanitized
temperature request
Dishwasher operates
too long
Water pressure is
temporarily low
The inlet water
temperature is low
Dishes are loaded too
close together improper
use of detergent
The selected cycle is
not suitable for food
soil condition
Spay arms is blocked
by some items
Load the dishes again as the manual
Add detergent depending on the water
hardness and the cycle you chose. Use
fresh detergent
Make sure the dishwasher is connected to
the hot water supply
Try not use your dishwasher when hot
water is being used elsewhere in the house
Choose anther cycle for longer washing
time
Make sure the spay arm is rotated freely
Use you dishwasher when the water
pressure is normal
Dishes are not clean
enough
24
Loading ...
Loading ...
Loading ...