Loading ...
Loading ...
Loading ...
Options
45
If Optimize Standby is switched on
(see "O
ptions - Optimize Standby"),
the time display will go out after a few
minutes, leaving just the
Start indica‐
t
or light flashing slowly.
Press any button to switch the display
back on aga
in for a few minutes.
The time up until the program starts will
count down in the display in hours for
dur
ations above 10 hours, and in mi‐
nutes for durations below 10 hours.
When the set time is reached, the pro‐
gr
am selected will start automatically.
The time remaining will appear in the
time display and the indicator light
will go out.
How the Delay Start time is shown in
the display:
up to 59 minutes:
e.g., 30 min
utes = .
1 hour up to 9 hours 30 minutes:
e.g., 5 hours = .
over 10 hours:
e.g., 15 hours =
If you open the door during the delay
star
t time, you must then press the
Start b
utton to continue the delay start
time.
Starting a program before the delay
star
t time has elapsed:
A program can be started before the
delay star
t period has elapsed.
Proceed as follows:
T
urn the dishwasher off with the
button.
T
urn the dishwasher on again with
the button.
Selec
t the program you want.
P
ress the
Start butt
on.
The program cycle will begin. The Start
indicat
or light will come on.
Loading ...
Loading ...
Loading ...