Loading ...
Loading ...
Loading ...
Before using for the first time
25
Rinse aid indicator
When the Rinse Aid indicat
or lights up,
the rinse aid reservoir contains suffi‐
cient rinse aid for 2 - 3 programs only.
Add rinse aid.
If you only ever use combination prod‐
ucts in you
r dishwasher, you can
switch both refill indicators for salt
and rinse aid off if you wish (see "Op‐
tions - Refill indicators").
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best r
esults.
The rinse aid dosage is set in stages
from 0 to 6. It is set to 3 at the factory.
This is the recommended setting.
The dosage can turn out to be higher
than the set valu
e due to the automatic
adjustment of the
Automatic p
rogram.
If spots appear on dishware and glass‐
war
e:
Increase the rinse aid dosage.
If clouding or smearing appears on
dishwar
e and glassware:
Decr
ease the rinse aid dosage.
T
urn the dishwasher off with the
button, if it is turned on.
P
ress the
Start butt
on and, simulta‐
neously, switch the dishwasher on
using the button.
Keep the
Start
button pressed for at
least four seconds until the
Start
indi‐
cator light comes on.
If this does not happen, start the proce‐
dur
e from the beginning again.
Press the button 3 times.
The indica
tor light will flash 3 times
at short intervals.
The set value will appear in the display
aft
er .
The flashing sequence
will appear in
the display.
This indicates a factory default setting
of 3.
Use the Start butt
on to select the set‐
ting required.
Each press on the button moves you
up a level. After reaching the highest
value, the counter starts from the be‐
ginning again.
The setting is now stored in memory.
T
urn the dishwasher off with the
button.
Loading ...
Loading ...
Loading ...