Loading ...
Loading ...
Loading ...
10
Lowes.com/harborbreeze
STANDARD OR ANGLED MOUNTING INSTRUCTIONS
3. Slide the downrod (A) into the yoke of the motor
assembly (E), align the holes, and re-install the
downrod clip (GG) and pin (FF). Then re-tighten
the motor housing set screws (HH) and slide the
yoke cover (F) down until it rests on top of the motor
assembly (E).
Hardware Used
FF
Downrod Pin x 1
GG
Downrod Clip x 1
HH
Motor Housing
Set Screw
x 2
F
GG
HH
FF
E
A
3
4. Depending on the length of downrod (A) you use,
you may need to cut the lead wires back to simplify
the wiring. If you decide to cut back the lead wires,
it is suggested that you do so in the following
manner: Take the lead wires and make sure that
you have pulled them all the way through the top of
the downrod (A) and measure 8 in. of lead wire, and
then cut the excess wire off with wire cutters (not
included).
A
4
Loading ...
Loading ...
Loading ...