Loading ...
Loading ...
Loading ...
12 13
PIC. 9
TO STOP USING
1. Release the trigger and switch the unit to the OFF position.
2. Turn the main water tap OFF.
3. Squeeze the trigger to release the water pressure.
4. Engage the safety gun lock.
5. Disconnect the water hose and pack up your
pressure washer.
6. Once cool, about 1hr, wipe your pressure washer down
and store in a secure location.
NOZZLES
Your pressure washer is supplied with these nozzles;
ADJUSTABLE NOZZLE (PIC. 9)
This nozzle can be adjusted while in use there is no need to stop
the water flow.
Being an adjustable nozzle, there are many different positions
which will give a variety of different spray widths and
water pressure.
WARNING: Never point or spray water at people or animals,
injury will occur.
WARNING: When adjusting the nozzle be careful of your hand
as the injury may occur if the water spray touches your hand.
LOW PRESSURE AND WIDE SPRAY
• While holding the gun twist the nozzle to the left.
HIGH PRESSURE AND NARROW SPRAY
• While holding the gun twist the nozzle to the right.
TURBO NOZZLE
This nozzle has a circular spray pattern which also oscillates
slightly. This is ideally used for pavers or concrete.
TO CHANGE NOZZLES
1. Ensure the pressure cleaner is turned OFF.
2. Push the red button on the lance in.
3. Remove the nozzle.
4. Select the next nozzle.
5. Push in selected nozzle and gently rotate until it clicks
into place
6. Turn pressure washer back on and continue cleaning.
Loading ...
Loading ...
Loading ...