Loading ...
Loading ...
Loading ...
17
Installation
Assembling the Stand base
1
2
3
Open the packaging. Be careful when using a sharp
object to open the packaging. The product may be
damaged.
Put your hands in the grooves on either side of the
top layer of styrofoam covering the product and
remove it.
While pressing down with one hand on the lower
styrofoam layer, lift the stand's neck with the other
hand.
Rotate the stand neck 90° counterclockwise
and put the connecting area on the edge of the
packaging.
4 5 6
Attach the stand base to the neck, as shown in
the image. Make sure there is no gap between the
stand neck and base.
Attach the stand base to the stand neck, and then
fasten the two screws on the base to tightly fix it.
The stand is now completely assembled.
Loading ...
Loading ...
Loading ...