Loading ...
Loading ...
Loading ...
Insert the end of the rod in housing, making sure that the
rod engages in the smallest hole of the retaining clip.
Care must be taken to keep the decklid raised until the
rod is fixed in the correct position.
NOTE: Maintain a tight grip on the decklid when raising,
in order to prevent any external occurrence (e.g. a gust of
wind) from suddenly opening the decklid to end of
travel. Additionally, in order to prevent any damage to
the car or broken windows, do not force the decklid
beyond the opening position necessary to secure the
supporting rod in the hole of the retaining clip.
Closing Procedure
1. Hold the decklid up with one hand and use the other
to remove rod from housing and reinsert it in its
locking device.
2. Lower the decklid approximately 7.8 inches (20 cm)
from the engine compartment and let it drop. Make
sure that the decklid is completely closed and not only
fastened in safety position by trying to open it. If it is
not completely closed, do not push the decklid down,
but raise it and repeat the procedure.
NOTE: Always check that the decklid is closed correctly
to prevent it from opening while the car is travelling.
WARNING!
• The maximum permitted load in the luggage com-
partment, in addition to the kits provided, is
33.1 lbs. (15 kg). Do not exceed the maximum
permitted load in the luggage compartment.
•
When accessing the rear luggage compartment, do not
come into contact with engine, or other components,
that may be hot and could burn you if touched.
• Access the luggage compartment only with the
vehicle stationary. Before exiting a vehicle, you
(Continued)
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29
Loading ...
Loading ...
Loading ...