Loading ...
Loading ...
Loading ...
Setup
14
SwannEye IP Camera
IP Address: The IP address assigned to the camera. If you are not having this
automatically assigned by a DHCP server, you will need to manually enter in
a valid static IP that is available on your network. The rst sections match the
rst three sections of your subnet.
Subnet Mask: The subnet the camera is connected to. The default subnet of
the camera is 255.255.255.0
Gateway: Make sure the subnet for each camera is set to the same subnet as
the PC IP address. The default gateway address is: 192.168.0.1
DNS Server: Enter the DNS address of the DNS server you want to use.
HTTP Port: The web port the camera will communicate on. Normally this is port
80 although this is sometimes blocked by some ISPs. We therefore recommend
you increment slightly to 85 or 90 to enable communication.
To successfully change any of these values, you will need to enter the administraor
username and password and click OK.
Viewing Account: The administrator username. Only the administrator has the
ability to make these changes. The default username is admin.
Viewing Password: The password for the viewing account you’re using. The
default password for admin is 123456.
Update (F5): Click to update the IP address and port information to the camera.
You’ll need a valid administrator username and password to be entered into the
Viewing Account / Password elds. When prompted, choose Ye s to apply your
changes and reboot the camera.
Loading ...
Loading ...
Loading ...