Loading ...
Loading ...
Loading ...
8 49-80403-5
Care and Cleaning
Glass Canopy Hood
Glass
canopy
Clean with a damp, soapy cloth and dry with a
clean cloth. A glass cleaner may also be used.
Stainless
steel hood
surfaces
Light bulbs
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
Monogram Preferred Service: 800.444.1845
Monogram.com
To change the light bulbs:
1. Remove the inner lamp lens cover by
inserting a small flat blade screwdriver into
each of the three slots and gently prying
it free.
NOTE: Do not remove the outer trim ring
(lamp assembly).
2. Grasp the bulb and pull it straight out.
3. Replace with the same wattage, type and
size bulb. Wear Gloves. Do not touch bulb
with your bare fingers.
These 12 volt, 20 watt halogen bulbs with a
G4 base are available at specialty lighting
stores and home building centers.
NOTE: If WRONG WATT BULB appears
in the display, the wrong kind of replacement
bulb has been used. Replace with the
same wattage, type and size bulb as the
one removed.
4. Replace inner cover by inserting the three
retaining tabs into the three slots and
pressing them firmly in place.
NOTE: Make sure the tabs are inserted into
the slots.
Use a small flat blade screwdriver to
remove the inner lamp lens cover.
Outer trim ring
(lamp assembly)
Do not remove
Removable inner
lamp lens cover
Bulb
Loading ...
Loading ...
Loading ...