Loading ...
Loading ...
Loading ...
• You can store a function under any of the available keys,
except under HOME, MODE, MORE
and FAVORITE,
USER 1 and USER 2.
• Use fresh batteries for both the learning and the original
remote control.
Learning
Place both remote controls on a flat surface (like a coffee
table) and aim them in such way that the IR transmitter
(at the top) of the original remote control points at the
IR receiver (at the bottom) of the SRU 8112. Keep about
40 mm in between the remote controls.You may need to
adjust the height of one of the remote controls to achieve
this.
Press the HOME key and select ‘Setup’ in the ‘Home’
menu.
Select ‘Learn’.
Select ‘Side keys’ or ‘Main keys’.
Select device and follow the on-screen instructions until
‘Success! Key learned’ is displayed.
• The key has now successfully learned the new function.
Repeat steps 4 and 5 to learn other keys.
If learning fails:
• Check that the IR transmitter (original remote control) and
the IR receiver (SRU 8112) are correctly aligned.
For this, refer to ‘Tips on learning key functions’.
• Adjust the distance between the two remote controls
(closer or further away) until the red ‘halo’ flashes very fast.
For this, refer to ‘Tips on code learning’.
• Try learning the original remote keys again.
• If problems reoccur with the same key, check if the original
remote control is transmitting and operates the target
device.
• Clear all learned settings and try learning again.
Labelling learned keys
When a key has successfully learned a new function, you can
label the key.
Select ‘Change label’.
Select ‘Done’ when finished.
2
1
6
5
4
3
2
1
40 mm
(1.6 inch)
17
ENGLISH
Extra possibilities
Loading ...
Loading ...
Loading ...