Loading ...
Loading ...
Loading ...
TOP CONSOLE MODELS
ROUGH-IN DIMENSIONS
26 7/8'
(68.3 crn)
ELECTRICCONNECTION
2 9/16'_
(6.5cm)
__ 13112"
(34.4cm)-_
3 3/4"
(9.5 crn)
©
3/8" (0.96 cm) DIA.
GASPIPE
43 5/8=
(110.7cm)
(91.5 cm)
1'12.54cm)
REAR ViEW
[X_3R OPEN 90°
< 27'
(68.6 cm)
SIDE VIEW
UNPACKING
I. Using the four shipping carton corner posts (two on each
side), carefully laythe dryer on its left sideand remove foam
shipping base.
_To preventdamage, do not usethe control panel
as a means to pick up or move the dryer.
NOTE: On under counter model clothes dryers, the top panel
may be removed for installation.
Return the dryer to an upright position.
__ ING
REVERSING DOOR SWING
Your dryer is designed so the door swing may be reversed at
any time without additional parts. Conversion isaccomplished
by transferring hinges to the opposite side of the cabinet.
To change the direction of the door opening:
I. Open the dryer door. Removethe four hinge hole plugsfrom
the left side of the door opening. Place nearby for future
installation. NOTE: You may need a plastic knife to help pull
out the plugs. Becareful not to scratch the paint.
2. Remove the four screws that secure the door hinges to the
dryer front panel (see below). NOTE: Remove one screw
from each of the two hinges first. Holdthe door firmly before
removing the last two screws.
3. Rotate the door 180° and reinstall the door hinges to the
dryer front panel with the four screws.
4. Install the four hinge hole plugs in the open screw holes on
the right sideof the door opening.
REMOVE 4 SCREWS
(ONE FROM EACH
HINGE FIRST)
Loading ...
Loading ...
Loading ...