Loading ...
Loading ...
Loading ...
26
351677
Spinning
To change the spinning rate by steps, from the rpm rate that was
preset on the selected program down to “ ” (pumping the water,
without spinning). The last setting is “ ” (Pumping) – the laundry
remains soaked in water from the last rinse.
Use this option if you wish to prevent creasing of the laundry when
you know you do not have the time to take it from the washing
machine immediately after the washing program is completed.
Light next to the selected spinning rpm is lit.
Start delay
Use this function to start the washing cycle after a certain amount
of time has elapsed. Press the (5) key to display 00:00 on the
display unit (5a).
By pressing the (5) key, you can adjust the time in 30-minute steps
up to 2 hours, and by 1-hour steps up to 24 hours.
If nothing is pressed for 5 seconds, actual washing time will be
displayed.
To reset the program end time, press the (5) key again.
The function is activated when the START/PAUSE key is pressed.
Time is counted down by minutes. When the countdown reaches
zero, the selected washing program will start automatically.
• To interrupt or change the program delay time press the
START/PAUSE key. Press the (5) key to select a new delay
time and confirm it by pressing the START/PAUSE key.
• to quickly cancel the setting of delay time, press the (5) key
and hold it for 3 seconds; then, press the START/PAUSE key
to resume the washing program.
• In case of a power supply failure before the delay time has
elapsed, press the START/PAUSE key to resume the delay
time countdown.
4
5
Loading ...
Loading ...
Loading ...