Loading ...
Loading ...
Loading ...
6
3. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function.
You can press and hold
at any time to pause the
function that is currently active.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature.
At this point, open the door, place the food in the
oven, close the door and start cooking by pressing
.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result.
Opening the door during the preheating phase will pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want to reach
using the knob.
5. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
To extend the cooking time without changing the
settings, turn the knob to set a new cooking time and
press
.
. AUTOMATIC FUNCTIONS
TEMPERATURE RECOVERY
If the temperature inside the oven decreases during a
cooking cycle because the door is opened, a special
function will be activated automatically to restore the
original temperature.
While the temperature is being restored, the
display will show a “snake” animation until the set
temperature has been reached.
While a programmed cooking cycle is in progress, the
cooking time will be increased according to how long
the door was open in order to guarantee best results.
. SPECIAL FUNCTIONS
AUTOMATIC CLEANING - PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has nished
airing) running the Pyro cycle.
Remove all accessories from the oven before
running the Pyro function.
If the oven is installed below a hob, make sure that
all the burners or electric hotplates are switched off
while running the self-cleaning cycle.
For optimum cleaning results, remove the worst
soiling with a damp sponge before using the Pyro
function. Only run the Pyro function if the appliance
contains heavy soiling or gives off bad odours during
cooking.
Access special functions
and turn the knob
to select
from menu. Then press to confirm.
Press
to start immediately the cleaning cycle or
turn the knob to select the shorten cycle (ECO).
Press
to start immediately the cleaning cycle, or
press
to set the end time/start delayed.
The oven will start the cleaning cycle and the door
will be locked automatically.
The oven door cannot be opened while
pyrolytic cleaning is in progress: It will remain locked
until the temperature has returned to an acceptable
level.
Air the room during and after running the Pyro cycle.
Please note: The duration and temperature of cleaning cycle
cannot be set.
. KEY LOCK
To lock the keypad, press and hold
for at least 5
seconds.
Do this again to unlock the keypad.
Please note: The key lock can also be activated while cooking
is in progress.
For safety reasons, the oven can be switched o at any time
by pressing .
Loading ...
Loading ...
Loading ...