Loading ...
Loading ...
Loading ...
Hurom Troubleshooting
Problem
8
7
9
10
11
12
Possible Reasons Solution
Water mark or scratch on the
squeezing screw.
Molding marks during manufacturing
process.
These marks and lines on the squeezing screw
are perfectly normal.
Color stain on the bowl, strainer,
spinning brush.
Natural dye from food.
Hurom is BPA-free and chemical-free on all
attachments, therefore natural dye from food
when juicing is perfectly normal. To reduce
staining, rinse and clean immediately after
each use. Diluted vinegar or bleach can also
be used.
Mold in silicone part of spinning
brush.
Poor cleaning.
Be sure to clean thoroughly by detaching the
silicone brushes from the spinning brush.
Don’t forget to plug it back in before juicing.
Strainer damage.
Ice, frozen foods, large hard seeds or pits,
unknown substance, or excess food in
bowl.
Refer to Instruction Manual for proper usage
and juicing tips. Remember not to overcrowd
food or force foods in.
Deformation of attachments
Exposed to heat or
abrasive materials.
Do not clean any attachments in dishwasher or
use hard cleaners. Plastics tend to deform
when exposed to high heat.
Too much pulp coming out.
Excess food in bowl clogging up the
strainer or food not cut into small pieces.
Cut food, especially brous foods, into smaller
pieces to avoid the bers wrapping around the
screw. Also input food at a slow pace allowing
all the pulp to eject before adding more food.
Loading ...
Loading ...
Loading ...