Loading ...
Loading ...
Loading ...
16
Cleaning items
1
Open the cover [1]. Place the item that is to be cleaned into the inner container [2].
2
Fill the inner container [2] with water. Do not exceed the maximum fill level indi-
cated by the MAX mark.
In order to achieve optimum cleaning results, you should fill the inner con-
tainer just full enough so that the item is fully immersed. If you are using the
screen insert, the cleaning power is reduced.
3
Close the cover [1].
4
Connect the unit to the mains socket. The LED indicator [5] is illuminated in red.
5
Press the ON/OFF button [4]. The unit starts cleaning.
The LED indicator [5] is now illuminated in blue.
Caution!
The water in the container heats up slightly during operation.
Replace the water after the third cleaning process and fill the container with fresh
water.
6
The cleaning is completed after approx. 180 seconds and the LED indicator [5] is
illuminated in red again.
If you are not satisfied with the results, repeat the process
(step 5).
7
Interrupting the cleaning
You can interrupt the cleaning manually at any time.
To do so, press the ON/OFF button [4].
After the cleaning
• Open the cover [1] and remove the items from the container [2].
Pull the mains plug out of the socket.
8
• Dry off the cleaned items using a clean, dry cloth and allow the items to dry
completely on the cloth if necessary.
9
Empty all the water unless you are going to clean any additional items.
Loading ...
Loading ...
Loading ...