Loading ...
Loading ...
Loading ...
Use
17
EN
4. The display will show the current time,
represented by the constantly illuminated
segments, and the minutes left to the end
of cooking, represented by the flashing
segments (each flashing segment means
12 minutes of cooking time left).
5. At the end of cooking, the timer will
switch the oven heating elements off, the
buzzer will start to sound and the
numbers on the dial will flash.
6. The set program can be cancelled: press
the key for 2 seconds to cancel the
set time and switch the oven off manually
if a cooking operation is in progress.
Programmed cooking
1. Set the cooking time as described in the
previous point “Timed cooking”.
2. Within 5 seconds of last pressing the key
or , press the key again to set
the cooking end time. The symbol
will flash on the display together with the
current time, with the internal segments
illuminated to show the end of cooking
time.
3. Press the key or to set the
cooking end time.
4. 5 seconds after the last key is pressed,
the display will show the current time and
the cooking start and end times, which
will be represented by the illuminated
internal segments. As soon as the current
time reaches the set cooking start time,
the internal segments will flash and the
oven will start cooking.
5. At the end of cooking, the timer will
switch the oven heating elements off, the
buzzer will start to sound and the
numbers on the dial will flash.
6. The set program can be cancelled: press
the key for 2 seconds to cancel the
set time and switch the oven off manually
if a cooking operation is in progress.
• In the example below, the current time is
7.06 and cooking is programmed to
start at 8.00 and end at 9.00.
• At 8 o'clock, the internal segments
between 8 and 9 will start to flash.
It is not possible to set a cooking
time of more than 12 hours.
Programmed cooking is the
function that allows a cooking
operation to be started at a set
time and then ended after a
specific length of time set by the
user.
For the oven to start cooking after
the programming procedures just
described, the knobs must be
correctly set on the required
temperature and function.
Loading ...
Loading ...
Loading ...