Conambo CNB100 Trucker Bluetooth Headset – 60Hrs Worktime Trucker headset with CVC8.0 Dual Mic Noise Cancelling, Mute Button, Upgraded Comfort and Durability Wireless Headphones for Drivers, Work, Phone Call

Overview

The Conambo JBT100 is a single-ear, on-ear Bluetooth headset designed for professional communication in high-noise environments such as truck driving, field service, and office work. It features noise cancellation, a long-lasting battery, and a durable, comfortable design.

Model: CNB100 (JBT100)

Features

Noise Cancellation

The headset uses ENC (Environmental Noise Cancellation) dual microphones and CVC 8.0 (Clear Voice Capture) technology to filter out up to 96% of background noise for clear call audio.

Battery & Power

• Battery Capacity: 400mAh rechargeable lithium polymer battery.
• Talk Time: Up to 35 hours.
• Music Playback Time: Up to 60 hours.
• Charging Time: Approximately 3.5 hours via the included USB Type-C cable.

Comfort & Design

• Ear Cushion: Breathable memory foam.
• Headband: Adjustable for a personalized fit.
• Microphone: 270° rotatable boom mic. Can be worn on the left or right ear.
• Durability: IP54 rated for dust and moisture resistance.
• Materials: Aluminum, faux leather, plastic, and silicone.

Connectivity

• Bluetooth Version: 5.1 with Qualcomm chip.
• Wireless Range: Up to 82 feet (25 meters).
• Compatibility: Designed for cell phones and other Bluetooth-enabled audio devices.
• Multipoint Pairing: Can connect to two devices simultaneously.

Use Guide

Package Contents

• Conambo JBT100 Bluetooth Headset
• USB Type-C Charging Cable
• Protective Carrying Case
• User Manual (this document)

Charging the Headset

1. Locate the USB Type-C charging port on the headset.
2. Connect the included USB Type-C cable to the headset.
3. Connect the other end of the cable to a USB power adapter or computer port.
4. The indicator light will show charging status. A full charge takes approximately 3.5 hours.

Powering On/Off & Pairing

1. Power On: Locate the switch button on the headset. Slide the switch up and hold for 2 seconds. You will hear a power-on prompt and the indicator light will flash blue and red.
2. Enter Pairing Mode: The headset will automatically enter pairing mode when powered on for the first time. The indicator light will flash blue and red rapidly. If it is not in pairing mode, press and hold the multi-function button for 5 seconds until the light flashes rapidly.
3. On your Bluetooth device (e.g., smartphone), go to Bluetooth settings.
4. Select "CNB100" or "JBT100" from the list of available devices.
5. If prompted, enter the pairing code "0000".
6. You will hear a "Connected" voice prompt.
7. Power Off: Slide the power switch down and hold for 2 seconds. You will hear a power-off prompt.

Headset Controls & Indicators

The primary controls are located on the earpiece.

• Multi-Function Button (Blue):
  • Answer/End Call: Press once.
  • Reject Call: Press and hold for 2 seconds.
  • Redial Last Number: Double-press.
  • Play/Pause Music: Press once when no call is active.
• Mute Button:
  • Mute/Unmute Microphone: Press once during a call.
  • Activate Voice Assistant (Siri/Google Assistant): Press and hold for about 2 seconds when paired.
• Volume Buttons (+/-): Adjust call or media volume.
• Indicator Light:
  • Flashing Blue & Red: In pairing mode.
  • Solid Blue: Connected.
  • Flashing Blue: Incoming call or voice prompt active.
  • Red Light: Battery is low.
  • Solid Red: Charging.
  • Light Off: Fully charged or powered off.

Wearing the Headset

1. Adjust the headband by extending or retracting the sliding arms to fit your head comfortably.
2. Place the ear cushion over your preferred ear.
3. Rotate the microphone boom downward and position it close to the corner of your mouth for optimal voice pickup.
4. The headset can be worn on either the left or right ear.

Resetting the Headset

To clear all paired devices and restore factory settings:

1. Ensure the headset is powered on.
2. Press and hold the multi-function button for 10 seconds.
3. The indicator light will flash blue rapidly three times, confirming the reset.
4. The headset will then re-enter pairing mode.

Specifications

Care & Maintenance

• Use a soft, dry cloth to clean the headset. Do not use abrasive cleaners or solvents.
• The IP54 rating provides protection against light dust and moisture splashes. It is not waterproof. Do not submerge the headset.
• Store the headset in the provided protective case when not in use.
• Avoid exposing the headset to extreme temperatures.

Troubleshooting

• Headset won't power on: Ensure the battery is charged. Connect to the charger for at least 10 minutes before trying again.
• Cannot pair with device: Ensure the headset is in pairing mode (rapid blue/red flashing). Move the headset and device closer together. Restart both devices and try again.
• Poor call quality or echo: Ensure the microphone is positioned correctly near your mouth. Reduce background noise if possible. Check the device's Bluetooth connection strength.
• Headset disconnects frequently: Ensure you are within the 82-foot range without major obstructions. Check for interference from other wireless devices. Ensure the headset battery is not low.
• Unable to reset: Ensure you are pressing and holding the multi-function button for the full 10 seconds while the headset is on.