Loading ...
Loading ...
Loading ...
4
CONTROL PANEL AND FEATURES
SOIL LEVEL
Select the setting most suitable for your load. For heavily
soiled and sturdy fabrics, select Heavy Soil Level for more
wash time. For lightly soiled and delicate fabrics, select Light
or Ex Light Soil Level for less wash time. A lighter soil-level
setting will help reduce tangling and wrinkling.
WASH TEMP
Wash Temp senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water safe
for your fabric.
• On some models and cycles, warm and hot water may be
cooler than your previous washer.
• Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
OPTIONS
The following options may be added to most cycles.
See “Cycle Guide” for additional details.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
PRO CLEAN
This option must be selected if using the Pro Clean
option.
PRO CLEAN w/ EX RINSE
This option turns on both the Pro Clean and the Extra
Rinse options.
WASH CYCLE KNOB
Use the Wash Cycle knob to select cycles on your washer.
See “Cycle Guide” for detailed descriptions of cycles.
START/PAUSE/UNLOCK LID BUTTON
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: If the washer is spinning, it may take several minutes
to unlock the lid. Press and hold for 3 seconds to cancel a
cycle.
CYCLE STATUS LIGHTS
The Cycle Status Lights show the progress of a cycle. You
may notice sounds or pauses different from traditional
washers at each stage of the process.
1
2
3
4
6
FILL
When the START/Pause/Unlock Lid button is pressed, the
washer will ll to an initial water level and begin sensing
to determine the load size. The washer will then continue
lling to the appropriate water level based on load size and
proceed to Wash.
If the lid is opened or the START/Pause/Unlock Lid button is
pressed, the cycle will pause. Closing the lid and/or pressing
the START/Pause/Unlock Lid button will resume the cycle. If
the cycle remains paused with the lid open for 10 minutes,
the washer will pump out the water.
WASH
During the rst stage of the sensing/wash cycle, water will
partially ll the washer and begin to move the load. It is
normal to have the sensing light on during this stage. You
will hear the agitator rotate followed by a several second
pause. This process will repeat for several minutes, allowing
the entire load to become saturated. The lower water
level combined with HE detergent at this stage allows for
concentrated cleaning. It is normal for the load to be above
the water line during this stage. At the beginning of the
second stage, the washer will add water to the correct level
based on the load size. You will hear the agitator increase
speed during this stage of the wash cycle. The motor sounds
may change at different stages in the wash cycle.
RINSE
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. You may hear the motor turning
on briey (short hum) to move the basket while lling.
FINAL SPIN
The washer spins the load at increasing speeds for proper
water removal based on the selected cycle and spin speed.
CYCLE COMPLETE
Once the cycle is complete, this light will come on. For best
results, promptly remove the load.
LID LOCKED
The Lock feature allows for higher spin
speeds. When lit, the lid is locked and
cannot be opened without pausing the
cycle. When the light is off, the lid can be
opened.
To open the lid after it has been locked,
press START/Pause/Unlock LId. The lid
will unlock once the washer movement has
stopped. This may take several minutes if
the load was spinning at high speed. Press
START/Pause/Unlock Lid while the lid is
closed to resume the cycle.
1
4
6
5
2
3
5
Loading ...
Loading ...
Loading ...