WM77110NBL01 User Manual

Loading ...

10 / English

Front-Loading Automatic Washer

Readthisfirst!

This washer can be individually installed in free-standing and built-in installations. You can also install

your washer with your dryer as a free-standing or built-in pair. Before you install your appliance, read

the following instructions completely and carefully:

• Savetheseinstructionsforfuturereference.

• Thisappliancemustbeproperlyinstalledandgroundedbyqualifiedandskilledtechniciansin

accordance with all local codes and ordinances and the latest edition of the National Electrical

Code,ANSI/NFPA70.

• Properinstallationofthisapplianceistheresponsibilityoftheownerandfailureduetoimproper

installation is not covered by the warranty.

The Right Location of Installation

You can install your washer in a basement, closet or in a laundry room if the location has proper

drainage, plumbing and power supply system. Always follow these instructions for installation:

• Donotinstallorstorethisappliancewhereitwillbeexposedtotheweather,rain,dampplaces,

water and direct sunlight. The ambient temperature must be higher than 60°F (15.6°C) for proper

operation. Installation location must have the proper ventilation.

• Donotstoreanduseanyflammableandcombustiblesubstancessuchaslint,paper,curtains,

gasoline, coal and liquid or vapor chemicals near the appliance.

• Installandoperatethewasheronastrongsolidconcretefloortopreventvibration,noiseor

movement in case of load unbalance. The floor must have sufficient load carrying capacity and the

washer must be leveled properly before the operation.

• Itisnotrecommendedtoinstallandoperatethewasheronawoodenfloororsoftfloor.Ifyou

have to install your washer on a wooden or frame construction floor, the floor must be reinforced

properly and the washer must be located in the corner of the room if possible.

• Neverplaceyourwasheronacarpet.Thispreventsaircirculation.Theelectricalcomponentsofthe

machine may overheat and cause damage.

• Donotstandapplianceonthepowercable.

• Donotinstallandoperateyourwasherinambienttemperatureslowerthan32˚F(0˚C).Controls

may stop working properly in such condition.

• Ifthereisdangeroffrost,drainallremainingwaterinpumpandhosessinceitmayfreezeand

causedamagebyburstingthem(see“Cleaningthedrainpump filter”).

Installation Clearances

CAUTION

Ò The installation location must be large enough for the washer door to be fully

opened for loading.

Ò The installation location must be large enough for ease of operation,

maintenance and service.

Ò Ensurethereismin1/2”ofclearanceoneachsideofthewashertoallow

slight side ways movement during washing and spin drying.

3 Installation Instructions

Loading ...

User Manual - Page 10