Loading ...
Loading ...
Loading ...
English - 18
5. Install dryer and bracket on washer.
• Lift the dryer on top of the washer. Protect the washer
control panel with cardboard or other protection. Be sure
to lift the dryer high enough to clear the washer control
panel.
• More than two people are recommended to lift the dryer
into position because of its weight and size. Failure to do
so could result in injury.
• Align the holes in the bracket with the holes in the back of
the dryer. Using a screwdriver, attach the M4x12 tapping
screws.
• Tighten the washer bracket screws ; then tighten all stacking kit screws.
6. Finalise the installation.
• Refer to the washer Installation Instructions to complete the washer installation.
• Refer to the dryer Installation Instructions to complete the dryer installation.
• Carefully slide or walk the stacked washer and dryer into place. Use felt pads or other sliding
device to assist moving and to protect fl ooring.
Do not push on the dryer once installed to top of the washer. Pushing on the dryer may result
in pinched fi ngers.
SCREW COVER
The door screw head can be hidden using the provided screw cover (x2).
To hide the screw head
1. Remove the protective fi lm (A) and the release liner (B) on the
screw cover.
2. Put the screw cover (C) on the screw head.
•
The provided screw cover is designed for this purpose only.
•
The screw cover comes with white-colored models only.
WARNING
WARNING
installing your dryer
A B
C
Dryer
Washer
DV90H8000HW-03407A-04_EN_150706.indd Sec3:18DV90H8000HW-03407A-04_EN_150706.indd Sec3:18 2015-07-06 3:18:432015-07-06 3:18:43
Loading ...
Loading ...
Loading ...