Loading ...
Loading ...
Loading ...
3. Remove bulb holder along with bulb and
replace.
4. Install in the reverse order.
Brake force display
Follow the general instructions on lamps and
bulbs, refer to page 276.
1.
Carefully remove the cover in the tailgate
panel with a screwdriver.
2. Rotate the bulb socket to the left and re‐
move.
3. Apply gentle pressure to the bulb while
turning it to the left for removal and re‐
placement.
4. Insert the bulb socket in the tailgate and
engage it.
5. Replace the cover.
License plate lamps
Follow the general instructions on lamps and
bulbs, refer to page 276.
These lamps are made using LED technology.
Contact your service center in the event of a
malfunction.
Center brake lamp
Follow the general instructions on lamps and
bulbs, refer to page 276.
This lamp uses LED technology for operation.
Contact your service center in the event of a
malfunction.
Changing wheels
Notes
Your vehicle is equipped with run-flat tires, re‐
fer to page 268, as standard equipment.
They do not need to be replaced immediately
in the event of a puncture.
When mounting new tires or changing from
summer to winter tires or vice versa, use run-
flat tires for your own safety.
Do not rotate the front wheels to the rear or
vice versa, as otherwise the handling charac‐
teristics will be negatively affected.
Suitable tools for changing the wheels are
available from the service center as an acces‐
sory.
Seite 280
Mobility Replacing components
280
Online Edition for Part no. 01 40 2 910 876 - VII/13
Loading ...
Loading ...
Loading ...