Loading ...
Loading ...
Loading ...
5
WARNING
Assemble the burners and grates only when the cooktop
is cool.
1. Put the burner ring on the burner base as shown
in Figure 1 and Figure 2. Be sure to match the
correct size.
2. As you put each ring in place, line up the tabs on
the burner ring with the notches on the burner
base (see Figure 2). Twist the burner ring back
and forth slightly to make sure it is properly
seated.
3. Set the burner cap on the top of each burner
ring (see Figure 3). Be sure to match the correct
size. The flat surface faces upward.
4. Gently set the grates over the burners. Put
the legs of each grate into the corresponding
notches on the spill tray. The notches will hold
the grate in place (see Figure 1).
Setting Up Your Cooktop
Figure 2: Aligning Tabs and Notches
Tabs
Notches
Burner ring
Burner base
Figure 3: Fully Assembled Burner
Porcelain
burner cap
Burner
base
Burner
ignitor
Brass
burner ring
Grate
Burner cap
Burner ring
Top frame
baseBurner
traySpill
(attached)
(attached)
Legs
Notches
Figure 1: Burner and Grate Assembly
Assembling the Burners and Grates
Loading ...
Loading ...
Loading ...